(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Snap Clamp (Down Mini Type) (QLSNDM) (Part Numbers)

Snap Clamp (Down Mini Type) (QLSNDM)
  • On Sale Till 31/03/2024

Down press type compact spring clamp force of 10N to 30N for light-duty work.

[Features]
· Down press type.
· Compact and small sized hook, ideal for use in small spaces.
· Finger tip operation fitting lever shape
· In unclamped position lever is fixed.
· Employs snap system. (Rotating arm single lock type)

  • STOCK

PDF

Part Number

Configured Part Number is shown.

Snap Type Push-Down Clamp

Black oxide coating / SUS / electroless nickel plating

Black oxide coating / SUS / electroless nickel plating

Clamp position

Clamp position

TypeBodyArmAdjusting Bolt
QLSNDM08S45C
Black oxide coating
SCM440
Hardening
Black oxide coating
SUS304
SCM435
Hardening
Black oxide coating
QLSNDM12
QLSNDM08-SUS
QLSNDM12-SUS
SCS13
(equivalent to SUS304)
SCS13
(equivalent to SUS304)
SUS304
QLSNDM08-NP
QLSNDM12-NP
S45C
Electroless nickel plating
SCM440
Electroless nickel plating

Specifications

Outline Drawing And Dimensions For Snap Clamp (Down Mini Type) (QLSNDM)

Dimensional Drawing For Snap Clamp (Down Mini Type) (QLSNDM)

Dimensional Drawing For Snap Clamp (Down Mini Type) (QLSNDM)

Side view

Side view

Top view

Top view

TypeClamp
Stroke
L2MH1HDL1WH3H2M1H4LAH5
QLSNDM08-01117M8 × 1.251639.516218612M4 × 0.7-12L Incomplete Threaded Portion 11528.5115
QLSNDM12-011.522M12 × 1.752453.5222710817M5 × 0.8-15L
Incomplete Threaded Portion 1.5
18.538137
QLSNDM12-03
Part NumberLever Load
(N)
Clamping Force
(N)
Weight
(g)
QLSNDM08-0151050
QLSNDM12-01120
QLSNDM12-031330

QLSNDM (black oxide coating)

Part NumberLever Load
(N)
Clamping Force
(N)
Weight
(g)
QLSNDM08-01-SUS51050
QLSNDM12-01-SUS120
QLSNDM12-03-SUS1330

QLSNDM-SUS (SUS)

Part NumberLever Load
(N)
Clamping Force
(N)
Weight
(g)
QLSNDM08-01-SUS51050
QLSNDM12-01-SUS120
QLSNDM12-03-SUS1330

QLSNDM-NP (electroless nickel plating)

About The Handling Of This Product

How To Adjust To Recommended Clamping Position

1. Place the adjusting bolt on the workpiece at the clamp end position. 2. Further push out the adjusting bolt toward the workpiece approximately half a clamp stroke, and then fasten it with the nut. This completes the adjustment.
  1. 1. Place the adjusting bolt on the workpiece at the clamp end position.
  2. 2. Further push out the adjusting bolt toward the workpiece approximately half a clamp stroke, and then fasten it with the nut. This completes the adjustment.

Usage

To adjust the height, use BJ601 Joint Bar (Slim Type).

To adjust the height, use BJ601 Joint Bar (Slim Type).

The clamping force and the lever load may vary by a maximum of ±20% with respect to the set value.

The clamping force and the lever load may vary by a maximum of ±20% with respect to the set value.

TypeUnclamp
QLSNDM08-01F > 10 N
QLSNDM12-01
QLSNDM12-03F > 30 N

If the reaction force acting on the clamp surface (F)
exceeds the clamping force, the clamp is released.

Part Number
QLSNDM08-01
QLSNDM08-01-NP
QLSNDM08-01-SUS
QLSNDM12-01
QLSNDM12-01-NP
QLSNDM12-01-SUS
QLSNDM12-03
QLSNDM12-03-NP
QLSNDM12-03-SUS
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Surface Treatment Clamping Force
(N)
Thread Diameter M Trusco Code
1 Piece(s) Same day 10[Steel] SteelBlack Oxide Coating10M8×1.25342-0060
1 Piece(s) Same day 10[Steel] SteelElectroless Nickel Plating10M8×1.25-
1 Piece(s) Same day 10Stainless SteelNo10M8×1.25-
1 Piece(s) 1 Day(s) 10[Steel] SteelBlack Oxide Coating10M12×1.75342-0078
1 Piece(s) 10 Day(s) or more 10[Steel] SteelElectroless Nickel Plating10M12×1.75-
1 Piece(s) 11 Day(s) or more 10Stainless SteelNo10M12×1.75-
1 Piece(s) Same day 10[Steel] SteelBlack Oxide Coating30M12×1.75342-0086
1 Piece(s) Same day 10[Steel] SteelElectroless Nickel Plating30M12×1.75-
1 Piece(s) Same day 10Stainless SteelNo30M12×1.75-

Loading...

  1. 1

Basic Information

Tightening Force (Range Selectable)(N) ~100 Type Main Body

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)