(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type

[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type

An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled
· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

(i)Caution

  • Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
    There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

Part Number
SR15SB1(GK)
SR15SB1M(GK)
SR15SB1SS(GK)
SR15SB1SSM(GK)
SR15SB1UU(GK)
SR15SB1UUM(GK)
SR15TB1M(GK)
SR15TB1SSM(GK)
SR15TB1UUM(GK)
SR15V1M(GK)
SR15V1SSM(GK)
SR15V1UUM(GK)
SR15W1M(GK)
SR15W1SSM(GK)
SR15W1UUM(GK)
SR20SB1(GK)
SR20SB1SS(GK)
SR20SB1UU(GK)
SR25SB1(GK)
SR25SB1SS(GK)
SR25SB1UU(GK)
SR30SB1(GK)
SR30SB1M(GK)
SR30SB1SS(GK)
SR30SB1SSM(GK)
SR30SB1UU(GK)
SR30SB1UUM(GK)
SR30TB1M(GK)
SR30TB1SSM(GK)
SR30TB1UUM(GK)
SR30V1M(GK)
SR30V1SSM(GK)
SR30V1UUM(GK)
SR30W1M(GK)
SR30W1SSM(GK)
SR30W1UUM(GK)
SR35SB1(GK)
SR35SB1M(GK)
SR35SB1SS(GK)
SR35SB1SSM(GK)
SR35SB1UU(GK)
SR35SB1UUM(GK)
SR35TB1M(GK)
SR35TB1SSM(GK)
SR35TB1UUM(GK)
SR35V1M(GK)
SR35V1SSM(GK)
SR35V1UUM(GK)
SR35W1M(GK)
SR35W1SSM(GK)
SR35W1UUM(GK)
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSBlock Type Material Nominal Part Number Block Mounting Hole Pitch (Width Direction)
(mm)
Block Mounting Hole Pitch (Length Direction)
(mm)
Block Mounting Hole Diameter Rail Mounting Hole Pitch
(mm)
Rail Mounting Hole Diameter Block External Dimension W
(mm)
Block External Dimension L
(mm)
Mounting hole for blocks Number of Block Mounting Holes
(holes)
Mounting Hole Dimension S
(M)
Mounting Hole Dimension H
(ø)
Mounting Hole Screw Depth
(mm)
Block Dimension L1
(mm)
Symbols for Dust Resistance
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel1541-4.5603.55240.4Drilled Hole2-4.5Through22.9No
1 Piece(s) 22 Day(s) or more 10WideStainless Steel1541-4.5603.55240.4Drilled Hole2-4.5Through22.9No
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel1541-4.5603.55240.4Drilled Hole2-4.5Through22.9Seal (end+side+inner)
1 Piece(s) 22 Day(s) or more 10WideStainless Steel1541-4.5603.55240.4Drilled Hole2-4.5Through22.9Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel1541-4.5603.55240.4Drilled Hole2-4.5Through22.9End seal
1 Piece(s) 22 Day(s) or more 10WideStainless Steel1541-4.5603.55240.4Drilled Hole2-4.5Through22.9End seal
1 Piece(s) 22 Day(s) or more 10WideStainless Steel1541264.5603.55257Drilled Hole4-4.5Through39.5No
1 Piece(s) 22 Day(s) or more 10WideStainless Steel1541264.5603.55257Drilled Hole4-4.5Through39.5Seal (end+side+inner)
1 Piece(s) 22 Day(s) or more 10WideStainless Steel1541264.5603.55257Drilled Hole4-4.5Through39.5End seal
1 Piece(s) 22 Day(s) or more 10StandardStainless Steel1526-4603.53440.4Tapped Holes2M4-722.9No
1 Piece(s) 22 Day(s) or more 10StandardStainless Steel1526-4603.53440.4Tapped Holes2M4-722.9Seal (end+side+inner)
1 Piece(s) 22 Day(s) or more 10StandardStainless Steel1526-4603.53440.4Tapped Holes2M4-722.9End seal
1 Piece(s) 22 Day(s) or more 10StandardStainless Steel1526264603.53457Tapped Holes4M4-739.5No
1 Piece(s) 22 Day(s) or more 10StandardStainless Steel1526264603.53457Tapped Holes4M4-739.5Seal (end+side+inner)
1 Piece(s) 22 Day(s) or more 10StandardStainless Steel1526264603.53457Tapped Holes4M4-739.5End seal
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel2049-5.56065947.3Drilled Hole2-4.5Through27.8No
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel2049-5.56065947.3Drilled Hole2-4.5Through27.8Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel2049-5.56065947.3Drilled Hole2-4.5Through27.8End seal
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel2560-76077359.2Drilled Hole2-7Through35.2No
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel2560-76077359.2Drilled Hole2-7Through35.2Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel2560-76077359.2Drilled Hole2-7Through35.2End seal
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel3072-98079067.9Drilled Hole2-9Through40.4No
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3072-98079067.9Drilled Hole2-9Through40.4No
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel3072-98079067.9Drilled Hole2-9Through40.4Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3072-98079067.9Drilled Hole2-9Through40.4Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel3072-98079067.9Drilled Hole2-9Through40.4End seal
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3072-98079067.9Drilled Hole2-9Through40.4End seal
1 Piece(s) 8 Day(s) or more 10WideStainless Steel30724098079096.8Drilled Hole4-9Through69.3No
1 Piece(s) 8 Day(s) or more 10WideStainless Steel30724098079096.8Drilled Hole4-9Through69.3Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideStainless Steel30724098079096.8Drilled Hole4-9Through69.3End seal
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel3040-88076067.9Tapped Holes2M8-1240.4No
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel3040-88076067.9Tapped Holes2M8-1240.4Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel3040-88076067.9Tapped Holes2M8-1240.4End seal
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel30404088076096.8Tapped Holes4M8-1269.3No
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel30404088076096.8Tapped Holes4M8-1269.3Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel30404088076096.8Tapped Holes4M8-1269.3End seal
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel3582-980910077.6Drilled Hole2-9Through45.7No
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3582-980910077.6Drilled Hole2-9Through45.7No
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel3582-980910077.6Drilled Hole2-9Through45.7Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3582-980910077.6Drilled Hole2-9Through45.7Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideCarbon Steel3582-980910077.6Drilled Hole2-9Through45.7End seal
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3582-980910077.6Drilled Hole2-9Through45.7End seal
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3582509809100111Drilled Hole4-9Through79No
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3582509809100111Drilled Hole4-9Through79Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10WideStainless Steel3582509809100111Drilled Hole4-9Through79End seal
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel3550-88097077.6Tapped Holes2M8-1245.7No
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel3550-88097077.6Tapped Holes2M8-1245.7Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel3550-88097077.6Tapped Holes2M8-1245.7End seal
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel355050880970111Tapped Holes4M8-1279No
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel355050880970111Tapped Holes4M8-1279Seal (end+side+inner)
1 Piece(s) 8 Day(s) or more 10StandardStainless Steel355050880970111Tapped Holes4M8-1279End seal

Loading...

  1. 1

Basic Information

Rail Type Standard No. of Blocks Used On The Same Rail 1 Set / Single Item Block only
Radial Clearance Normal Accuracy Grade Standard Grade Ball Arrangement 4 Rows of Circular
Retainer No Lubrication System No Rolling Element Ball

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)