High-Power Joint Female Screw Tee

High-Power Joint Female Screw Tee

Can be easily connected by cutting the pipe and tightening the nut. Since the high power joint has no lock ring and has a structure where the rubber packing is pressed against the outer surface of the pipe, it can allow slight extension and contraction (fall-out prevention separately required).


Japanese Only

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipNominal A 1 Nominal B 1 Applicable Pipe O.D. 1
Nominal of Thread Surface Treatment
71 Day(s) or more 652 1/276.302 1/2B(65A)Epoxy Resin (Model number symbol /-EF)
71 Day(s) or more 652 1/276.302 1/2B(65A)Hot zinc plating (part numbers /-W)


  1. 1

Basic Information

Type Fitting Body Material Malleable Cast Iron Applicable Pipe Type Steel pipe (general)
Applicable Fluid Water / Air / Gas / Oil Connection Type Pipe⇔Screw, plug-in type Connection Shape Tee
Fitting type Mechanical Joint Applicable Tube Size Type Steel pipe JIS size Applicable Pipe Material Steel / PVC
Connection Thread Type Rc Max. Operating Pressure(MPa) 1 Divisions of Max. Operating Pressure(MPa) 1.0Mpa or Less

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)