(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Two-Circuit Limit Switch [WL-N/WL]

Click this image to zoom it.

Move the mouse over the image to zoom

On Sale Till 30/06/2024

OMRON

The 2-circuit limit switch with variety of models that can be selected matching to the usage environment and application.

[Features]
· Circuit will break without fail by using 2-circuit double-break.
· Structure suitable to IP67 due to O ring and/or cover seal.
· Overseas approval corresponding to the machines for export approved by UL, CSA, TUV, EN/IEC, CCC.
· Most suitable to machines for export.
· Optimum high accuracy type in controlling the position is available in all types.
· Movement till operation is less (about 5°) but repeatability is two times of standard type

Part Number

Configured Part Number is shown.

Product TOP

: 30; 45; 60

Part Number
WL01CA2
WL01G12
WL01NJ
WL-1H1100-N(FOR WLCA2-N)
WL-1H2100-N(FOR WLCA12-N
WL-1H2100(WLCA12 HEAD,LEVER)
WL-3H1100-N(FOR WLCA2-2-N)
WL-3H1100(WLCA2-2 HEAD,LEVER)
WL-3H2100-N(FOR WLCA12-2-N)
WL-3H2100(WLCA12-2 HEAD,LEVER)
WL-5H5104(WLCA32-43 HEAD,LEVER)
WL-6H1100(WLCA2-2N HEAD,LEVER)
WL-9H100(WLNJ HEAD,LEVER)
WL-9H200(WLNJ30 HEAD,LEVER)
WL-9H300(WLNJ-2 HEAD,LEVER)
WL-9H400(WLNJ-S2 HEAD,LEVER)
WL-LD-N(LAMPCOVER)
WL-LDS-N(LAMPCOVER)
WL-LE-N(LAMPCOVER)
WL-N TERMINAL PLATE
WLCA2
WLCA2-2
WLCA2-2-N
WLCA2-2LD
WLCA2-2LE
WLCA2-2LE-N
WLCA2-2N
WLCA2-2N-N
WLCA2-2NLD
WLCA2-2NLD-N
WLCA2-2NLE
WLCA2-2NTH
WLCA2-2NTH-N
WLCA2-2TH
WLCA2-2TH-N
WLCA2-7-N
WLCA2-7LD-N
WLCA2-8-N
WLCA2-8LD-N
WLCA2-55
WLCA2-55-N
WLCA2-55LD-N
WLCA2-G1-N
WLCA2-LD-M1GJ-N
WLCA2-LD-N
WLCA2-LDK13-N
WLCA2-LDK43-N
WLCA2-LDS
WLCA2-LDS-N
WLCA2-LE-N
WLCA2-N
WLCA2-P1-N
WLCA2-RP
WLCA2-RP-N
WLCA2-TC-N
WLCA2-TH
WLCA2-TH-N
WLCA12
WLCA12-2-N
WLCA12-2LD

Minimum order quantity	Days to Ship	RoHS	Detector Shape	Environment	Plunger Shape Type	Boot Seal	Roller Lever Shape Type	Rod Shape Type	Operating Temperature Range (°C)	Acquired Standards	Protection Structure	Force Required for Push Side O.F. (N)	Motion to Switching P.T. (mm)	Angle to Switching P.T (deg)	Max. Stroke T.T (mm)	Contact Type	Mechanical Life (10,000 times)	Mechanical Operation Frequency (times/min or Less)	Rated Operating Voltage (V)	Rated Conductance Current (A)	Main Body External Dimension, Width W (mm)	Main Body External Dimension, Height H (mm)	Main Body External Dimension, Length L (mm)	Lever Length R (mm)	Cable Specifications	Detector element details	Indicator Light	Movement After the Operation OT (mm)	Operating Position OP (mm)	Conduit size	Specification of Terminal	Cord / cable length (m)	Details Type	O.D.	Function	Mounting system	Direction of Operation	Roller position	Contact format	Built-in Switch Specification	Connector Type	Wiring Specifications	Lever Tightening Specification	AC Rated Voltage	DC Rated Voltage	AC Electrical Rating details	DC Electrical Rating details	Head Material	Specifications	Application	Note
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / AC100/125V	0.1	40±0.7	60	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Lever type, standard type, micro-load type	φ17.5×7	-	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard	-	No	Variable Roller Levers	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	9.81	-	10 -1/+2	-	2-circuit Double-break	1000	120	DC30V or Less / AC100/125V	0.1	40±0.7	67	94.1	25-89	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Lever type, over-travel 80° / high sensitivity / micro-load type	φ17.5×7	-	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Rod Shape	Standard	-	No	-	[Spring + Metal Rod] Coil Spring	-10～80	UL / GB(CCC) / CQC / CSA	IP67	1.47	20±10	-	-	2-circuit Double-break	1000	120	DC30V or Less / AC100/125V	0.1	40±0.7	42	203.7	-	-	Stainless steel coil spring φ6.5	No	-	-	G1/2	Ground terminal not included	-	Flexible rod (coil spring) type, micro-load type	φ6.5	-	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	-	-	-	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	-	-	-	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Head (With Actuator) For WLCA2-N	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	-	-	-	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	-	-	-	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Head (With Actuator) For WLCA12-N	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Adjustable roller lever type	-	-	-	-	-	-	Head only parts set type, for WLCA12	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLCA12	R25 to 89 mm (adjustment range)
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	-	-	-	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	-	-	-	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Head (With Actuator) For WLCA2-2-N	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Roller lever type	-	-	-	-	-	-	Head only parts set type, for WLCA2-2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLCA2-2	Stainless sintered roller
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	-	-	-	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	-	-	-	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Head (With Actuator) For WLCA12-2-N	φ17.5×7	-	-	-	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Adjustable roller lever type	-	-	-	-	-	-	Head only parts set type, for WLCA12-2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLCA12-2	R25 to 89 mm (adjustment range)
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Fork lever lock type	-	-	-	-	-	-	Head only parts set type, for WLCA32-43	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLCA32-43	-
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Roller lever type	-	-	-	-	-	-	Head only parts set type, for WLCA2-2N	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLCA2-2N	Stainless sintered roller
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Flexible rod type	-	-	-	-	-	-	Head only parts set type, for WLNJ	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLNJ	Coil spring
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Flexible rod type	-	-	-	-	-	-	Head only parts set type, for WLNJ30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLNJ-30	Coil spring
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Flexible rod type	-	-	-	-	-	-	Head only parts set type, for WLNJ-2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLNJ-2	Resin rod
1 Piece(s)	Same day	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Flexible rod type	-	-	-	-	-	-	Head only parts set type, for WLNJ-S2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For WLNJ-S2	Steel wire
1 Piece(s)	Same day	10	-	Standard	-	-	-	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	-	-	-	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	-	-	-	-	-	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	Cover with lamp	-	-	-	-	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	-	Standard	-	-	-	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	-	-	-	-	2-circuit Double-break	1500	120	DC125V	0.8	40±0.7	-	-	-	-	-	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	Cover with lamp	-	-	-	-	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	-	Standard	-	-	-	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	-	-	-	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	-	-	-	-	-	Neon Lamp	-	-	G1/2	Ground terminal not included	-	Cover with lamp	-	-	-	-	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Terminal plate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Quote	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	General standard type, reference type, general load type	φ17.5×7	-	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	8.83	-	25±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	General standard reference type, overtravel type 90° operating type	φ17.5×7	The type of the set( used as a part of a single item WL-1H1100 type )	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller lever type	Standard	-	-	-	-	-10～80	-	IP67	-	25±5°	-	-	-	1500	120	-	-	-	-	-	-	-	Roller lever type	No	-	-	G1/2	Ground terminal not included	-	General operating display type, standard type	-	-	-	-	-	-	General built-in switch	-	Screw terminal type	Standard (hexagon socket head cap screw)	125 / 250 / 500	8 / 14 / 30 / 125 / 250	125 V AC, 250 V, 500 V (10 A)	8 V DC, 14 V (10 A) / 30 V (6 A) / 125 V (0.8 A) / 250 V (0.4 A)	Stainless sintered roller	General load/micro-load	-	R38 mm
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	8.83	-	25±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V	10	40±0.7	60	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	General standard reference type, overtravel type 90° operating type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	-	IP67	8.83	-	25±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V	10	40±0.7	60	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	Neon Lamp	-	-	G1/2	Ground terminal not included	-	General operating display type, overtravel 90° operating type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	12 Day(s) or more	-	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	25±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	53.2±0.8	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	Neon Lamp	-	-	G1/2	Ground terminal not included	-	General operating display type, standard type (roller / lever)	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	71 Day(s)	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	9.61	-	20	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	101.8	38	-	Stainless steel-based sintered roller φ17.5 × 7	-	-	-	G1/2	Ground terminal not included	-	General operating display type, overtravel 90° operating type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	20	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	53.2±0.8	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Separate parts set format, general form, reference form (roller / lever)	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	9.61	-	20	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / AC100/125V	10	40±0.7	60	101.8	38	-	Stainless steel-based sintered roller φ17.5 × 7	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	General standard type, overtravel 90° operating type	φ17.5×7	The type of the set( used as a part of a single item WL-6H1100 type )	Bi-directional (front / back) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	20	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	53.2±0.8	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	General operating display type, standard type (roller / lever)	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	9.61	-	20	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V	10	40±0.7	60	101.8	38	-	Stainless steel-based sintered roller φ17.5 × 7	Neon Lamp	-	-	G1/2	Ground terminal not included	-	General standard reference type, overtravel type 90° operating type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard / Heat Resistant	-	No	Standard	-	5～120	UL / GB(CCC) / CQC / CSA	IP67	9.61	-	20	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	101.8	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, overtravel type 90° (-2N type) heat-resistant type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	12 Day(s) or more	-	Roller Lever Type (rotation)	Standard / Heat Resistant	-	Presence	Standard	-	5～120	-	IP67	13.34	-	20	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	53.2±0.8	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, heat-resistant type	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard / Heat Resistant	-	No	Standard	-	5～120	UL / GB(CCC) / CQC / CSA	IP67	8.83	-	25±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, overtravel type 90° (-2 type) heat-resistant type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Quote	10	Roller Lever Type (rotation)	Standard / Heat Resistant	-	Presence	Standard	-	5～120	UL / GB(CCC) / CSA	IP67	13.34	-	25±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	53.2±0.8	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, heat-resistant type	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	12 Day(s) or more	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	10.2	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	50	-	Stainless Steel Type Sintering Roller φ17.5×15	No	-	-	G1/2	Ground terminal not included	-	General standard type, standard type (roller / lever)	φ17.5×15	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CSA / EN	IP67	10.2	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	50	-	Stainless Steel Type Sintering Roller φ17.5×15	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	General operating display type, standard type (roller / lever)	φ17.5×15	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	12 Day(s) or more	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	8.04	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	63	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	General standard type, standard type (roller / lever)	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	12 Day(s) or more	-	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	8.04	-	15±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	63	-	Stainless Steel Type Sintering Roller φ17.5×7	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	General operating display type, light-emitting diode system (LED)	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Quote	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, high-sealed type, standard type built-in switch	φ17.5×7	-	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard / Oil Resistant / Water Resistance	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, high-sealed type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard / Oil Resistant / Water Resistance	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, high-sealed type, light emitting diode system (LED)	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	46 Day(s) or more	-	Roller lever type	Standard	-	-	-	-	-10～80	-	IP67	-	15±5°	-	-	-	1500	120	-	-	-	-	-	-	-	Roller lever type	No	-	-	G1/2	Ground terminal included	-	General operating display type, standard type	-	-	-	-	-	-	General built-in switch	-	Screw terminal type	Standard (hexagon socket head cap screw)	125 / 250 / 500	8 / 14 / 30 / 125 / 250	125 V AC, 250 V, 500 V (10 A)	8 V DC, 14 V (10 A) / 30 V (6 A) / 125 V (0.8 A) / 250 V (0.4 A)	Stainless sintered roller	General load/micro-load	-	R38 mm
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	Light-emitting diode (LED)	-	-	G1/2	Pre-Wired Connector Type (2 Core)	0.3	General operating display type, light-emitting diode system (LED)	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	General operating display type, standard type (roller / lever)	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	Light-emitting diode (LED)	-	-	G1/2	Shooting Straight out Connector (2 Core)	-	General operating display type, light-emitting diode system (LED)	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	12 Day(s) or more	-	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	Light-emitting diode (LED)	-	-	G1/2	Shooting Straight out Connector (4 Core)	-	General operating display type, light-emitting diode system (LED)	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / AC100/125V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	Spatter-prevention roller lever (lever with hexagonal socket)	φ17.5×7	-	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	38	-	Stainless steel type sintering roller φ17.5×7, lever with hexagonal socket	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included, screw tightening terminal type	-	Spatter-prevention (lever with hexagonal socket)	φ17.5×7	Gold clad contact mounted cross bar structure	Front / back mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	Neon Lamp	-	-	G1/2	Ground terminal not included	-	General operating display type, standard type (roller / lever)	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	Presence	Standard	-	-10～80	UL / GB(CCC) / CSA / EN	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Separate parts set format, general form, reference form (roller / lever)	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard / Weather Resistance	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	General standard type, weather-resistant type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Quote	-	Roller Lever Type (rotation)	Standard	-	No	Standard	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, corrosion-resistant type	φ17.5×7	-	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard / Outdoor Corrosion Resistance / Hydrogen Gas	-	Presence	Standard	-	-10～80	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, corrosion-resistant type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap action, single sided operation supported	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	12 Day(s) or more	-	Roller Lever Type (rotation)	Standard / Cold Resistance	-	Presence	Standard	-	-40～40	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, cold-resistant type	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	61 Day(s)	-	Roller Lever Type (rotation)	Standard / Heat Resistant	-	No	Standard	-	5～120	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	60	94.1	38	-	Stainless steel sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Lever type, environmentally tolerant type / cold-tolerant type	φ17.5×7	-	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard / Heat Resistant	-	Presence	Standard	-	5～120	-	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	-	40±0.7	53.2±0.8	94.1	38	-	Stainless steel-based sintered roller φ17.5 × 7	No	-	-	G1/2	Ground terminal not included	-	Environmentally tolerant type, heat-resistant type	φ17.5×7	Gold clad contact mounted cross bar structure	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	10	Roller Lever Type (rotation)	Standard	-	No	Variable Roller Levers	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	13.34	-	15±5	-	2-circuit Double-break	1500	120	DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V	10	40±0.7	67	94.1	25-89	-	Stainless Steel Type Sintering Roller φ17.5×7	No	-	-	G1/2	Ground terminal not included	-	Lever type, reference type, general load	φ17.5×7	The type of the set( used as a part of a single item WL-1H2100 type )	Bi-directional (front / back) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-
1 Piece(s)	Same day	-	Roller lever type	Standard	-	-	-	-	-10～80	-	IP67	-	25±5°	-	-	-	1500	120	-	-	-	-	-	-	-	Adjustable roller lever type	No	-	-	G1/2	Ground terminal not included	-	General operating display type, standard type	-	-	-	-	-	-	General built-in switch	-	Screw terminal type	Standard (hexagon socket head cap screw)	125 / 250 / 500	8 / 14 / 30 / 125 / 250	125 V AC, 250 V, 500 V (10 A)	8 V DC, 14 V (10 A) / 30 V (6 A) / 125 V (0.8 A) / 250 V (0.4 A)	Stainless sintered roller	General load/micro-load	-	R25 to 89 mm (adjustment range)
1 Piece(s)	Same day	-	Roller Lever Type (rotation)	Standard	-	No	Variable Roller Levers	-	-10～80	UL / GB(CCC) / CQC / CSA	IP67	8.83	-	25±5	-	2-circuit Double-break	1000	120	DC30V or Less / DC125V / AC100/125V	10	40±0.7	67	94.1	25-89	-	Stainless steel-based sintered roller φ17.5 × 7	Light-emitting diode (LED)	-	-	G1/2	Ground terminal not included	-	Lever type, overtravel 90° operating type	φ17.5×7	-	4-direction (front / rear / side) mounting	Snap Action	-	1a1b	-	-	-	-	-	-	-	-	-	-	-	-

Basic Information

Main Body Size	Standard

Configure

141 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Detector Shape
- Plunger Type
- Roller Lever Type (rotation)
- Rod Shape
- Roller lever type
Clear
Environment
- Standard
- Outdoor Corrosion Resistance
- Cold Resistance
- Heat Resistant
- Hydrogen Gas
- Weather Resistance
- Oil Resistant
- Water Resistance
Clear
Plunger Shape Type
- Top Plunger
  - Side Roller / Plungers
  - Top, Plunger
- Top-ball plunger
- Roller Plungers
  - Top, Roller Plunger
- Side plunger
Clear
Boot Seal
- No
- Presence
Clear
Roller Lever Shape Type
- Standard
- Fork Lever Lock
- Variable Roller Levers
- Variable Rods, Levers
- Spring･Rod･Lever
Clear
Rod Shape Type
- Variable Metal Rods
- Spring + Metal Rod
  - Coil Spring
  - Coil Spring (Multi-turn)
  - Steel wire
- Spring + Resin Rod
  - Coil Spring (Resin)
  - Plastic Rod
Clear
Force Required for Push Side O.F.(N)
0.28

0.9

0.98

1.39

1.47

2.84

8.04

8.83

9.61

9.81

10.2

11.77

13.34

16.67

26.67

40.03
Clear
Contact Type
- 2-circuit Double-break
Clear
Rated Operating Voltage(V)
- DC30V or Less
- DC125V
- DC250V
- AC100/125V
- AC240/250V
- More than AC300V
Clear
Rated Conductance Current(A)
0.1

0.4

0.8

10
Clear
Cable Specifications
- -
Clear
Detector element details
- Stainless steel wire φ1 × 193
- Plastic roller (2-φ17.5 × 7)
- Piano wire φ2.3
- Piano wire φ2.3 (spring rod lever)
- Stainless steel rod φ3 ± 0.2 (length 160)
- Stainless steel rod φ3.2
- Coil / spring (multi-turn) φ4.8
- Coil / spring φ6.5
- Stainless steel coil spring φ6.5
- Stainless steel coil spring φ6.5 × 140
- Resin rod φ8
- Polyamide resin rod φ8 × 140
- Stainless steel plunger φ10
- Stainless steel roller φ11.2 × 5
- Stainless steel type sintering roller φ11.2×5
- Stainless steel ball φ15.5
- Stainless steel-based sintered roller φ17 × 4.6
- Stainless Steel Type Sintering Roller φ17.5×7
- Stainless steel-based sintered roller φ17.5 × 7
- Stainless steel sintered roller φ17.5 × 7
- Stainless steel type sintering roller φ17.5×7, lever with hexagonal socket
- Stainless Steel Type Sintering Roller φ17.5×15
- Adjustable roller lever type
- Flexible rod type
- Fork lever lock type
- Roller lever type
- Stainless Steel Plunger
- Variable roller lever type
Clear
Indicator Light
- LED (10 to 115 V AC/DC)
- Light-emitting diode (LED)
- Neon Lamp
- No
Clear
Movement After the Operation OT(mm)
5.6

6.4
Clear
Operating Position OP(mm)
- 40.6±0.8
- 44±0.8
- 44.5±0.8
- 54.2±0.8
Clear
Conduit size
G1/2
Clear
Specification of Terminal
Pre-Wired Connector Type (2 Core)

Shooting Straight out Connector (2 Core)

Pre-Wired Connector Type (3 Core)

Pre-Wired Connector Type (4 Core)

Shooting Straight out Connector (4 Core)

Ground terminal included

Ground terminal not included

Ground terminal not included, screw tightening terminal type
Clear
Cord / cable length(m)
- 0.3
Clear
Details Type
- Head only parts set type, for WLNJ-2
- Head (With Actuator) For WLCA2-N
- Head only parts set type, for WLNJ-S2
- Head (With Actuator) For WLCA2-2-N
- Head only parts set type, for WLCA2-2
- Head only parts set type, for WLCA2-2N
- Head (With Actuator) For WLCA12-N
- Head only parts set type, for WLCA12
- Head (With Actuator) For WLCA12-2-N
- Head only parts set type, for WLCA12-2
- Head only parts set type, for WLNJ30
- Head only parts set type, for WLCA32-43
- Environmentally tolerant type, overtravel type, high-sensitivity type / 80° sealed, built-in switch
- General operating display type, overtravel 80° general type
- General sensor I/O connector type, overtravel type, high sensitivity / 80° general form
- General standard type, overtravel 80° general type / general load
- General standard type, overtravel type, high-sensitivity type 80°
- General standard type, overtravel type, high-sensitivity type 80° / general load
- Lever type, over-travel 80° / high sensitivity / micro-load type
- Spatter-prevention type, overtravel form, high sensitivity type / 80° (double nut lever)
- Spatter-prevention type, overtravel form, high sensitivity type / 80° (lever with hexagonal socket)
- General operating display type, overtravel 90° operating type
- General standard reference type, overtravel type 90° operating type
- General standard type, lever type, overtravel 90° operating type / general load
- General standard type, overtravel 90° operating type
- General standard type, overtravel type, 90° operating type
- Lever type, overtravel 90° operating type
- Environmentally tolerant type, overtravel type 90° (-2 type) heat-resistant type
- Environmentally tolerant type, overtravel type 90° (-2N type) heat-resistant type
- Cover with lamp
- Environmentally tolerant type, cold-resistant type
- Environmentally tolerant type, cold-resistant type (variable roller level)
- Environmentally tolerant type, corrosion-resistant type
- Environmentally tolerant type, heat-resistant type
- Environmentally tolerant type, high-precision type, heat-resistant type
- Environmentally tolerant type, high-sealed type
- Environmentally tolerant type, high-sealed type, light emitting diode system (LED)
- Environmentally tolerant type, high-sealed type, standard type built-in switch
- Environmentally tolerant type, standard reference type, heat-resistant type (variable roller / lever)
- Flexible rod (coil spring) type, micro-load type
- General form, standard type, holding type
- General form, standard type, reference type
- General operating display form, high-precision type
- General operating display type, flexible / rod type
- General operating display type, light-emitting diode system (LED)
- General operating display type, overtravel type, general type
- General operating display type, overtravel type, high-sensitivity type
- General operating display type, plunger type
- General operating display type, standard type
- General operating display type, standard type (roller / lever)
- General operating display type, standard type (variable rod / lever)
- General operating display type, standard type (variable roller / lever)
- General standard form, plunger type, general load
- General standard type, flexible / rod type / general load
- General standard type, general load type
- General standard type, high-precision / high-sensitivity type / general load
- General standard type, lever type, reference type / general load
- General standard type, leverless body
- General standard type, overtravel type, general type
- General standard type, overtravel type, high-sensitivity type
- General standard type, reference type (variable rod / lever)
- General standard type, reference type, general load type
- General standard type, standard type (roller / lever)
- General standard type, standard type (spring rod lever)
- General standard type, weather-resistant type
- General type, operating display type, light-emitting diode system (LED)
- Head only parts set type, for WLNJ
- Individual parts set mode, general type, reference type (variable rod / lever)
- Lever type, environmentally tolerant type / cold-tolerant type
- Lever type, reference type, general load
- Lever type, standard type, micro-load type
- Long life type, operating display type, light-emitting diode system (LED)
- Separate parts set format, general form, reference form (roller / lever)
- Separate parts set format, general form, reference form (variable roller / lever)
- Spatter-prevention (lever with hexagonal socket)
- Spatter-prevention roller lever (lever with hexagonal socket)
- Spatter-prevention type, high sensitivity / high accuracy type
- Terminal plate
Clear
O.D.
- φ1 × 193
- 2-M3.5
- 2-φ17.5 × 7
- φ2.3
- φ3 ± 0.2
- φ3 ± 0.2 (length 160)
- φ3.2
- φ4.8 × 140
- φ6.5
- φ6.5 × 140
- φ8×140
- φ10
- φ11.2 × 5
- φ15.5
- φ17×4.6
- φ17.5×7
- φ17.5×15
Clear
Function
Head only parts set type (type WL-9H300)

Head only parts set type (type WL-7H200)

Head only parts set type (type WL-7H400)

The type of the set( used as a part of a single item WL-6H1100 type )

Head only parts set type (type WL-6H4100)

Head only parts set type (type WL-4H4100)

Head only parts set type (type WL-2H1100)

Set format (for single head, model WL-2H1100)

Head only parts set type (type WL-2H1100-1)

Head only parts set type (type WL-2H2100)

Head only parts set type (type WL-2H2100-1)

Head only parts set type (type WL-2H4100)

The type of the set( used as a part of a single item WL-1H1100 type )

The type of the set( used as a part of a single item WL-1H2100 type )

DC Specifications

DC specification, NO wiring

Gold clad contact mounted cross bar structure
Clear
Mounting system
4-direction (front / rear / side) mounting

Bi-directional (front / back) mounting

Front / back mounting

Head four-directional (front / rear / side) mounting
Clear
Direction of Operation
Snap Action

Snap action, single sided operation supported
Clear
Roller position
- Inside - inside
- Outside - inside
- Outside - outside
Clear
Contact format
- 1a1b
Clear
Built-in Switch Specification
General built-in switch
Clear
Connector Type
- DGJS03T (for DC)
Clear
Wiring Specifications
Pre-wired connector type

Screw terminal type
Clear
Lever Tightening Specification
- Standard (hexagon socket head cap screw)
Clear
AC Rated Voltage
115

125 / 250 / 500
Clear
DC Rated Voltage
8 / 14 / 30 / 125 / 250

115
Clear
AC Electrical Rating details
- 115 V AC (3 A)
- 125 V AC, 250 V, 500 V (10 A)
Clear
DC Electrical Rating details
- 8 V DC, 14 V (10 A) / 30 V (6 A) / 125 V (0.8 A) / 250 V (0.4 A)
- 115 V DC (0.4 A)
Clear
Head Material
- Stainless sintered roller
- Stainless steel coil spring
Clear
Specifications
- General load
- General load/micro-load
Clear
Application
- For WLNJ-30
- For WLNJ-2
- For WLNJ-S2
- For WLCA2-2
- For WLCA2-2N
- For WLCA12
- For WLCA12-2
- For WLCA32-43
- For WLNJ
Clear
type
- WL
- WL-N
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

12 Day(s) or Less

16 Day(s) or Less

36 Day(s) or Less

38 Day(s) or Less

42 Day(s) or Less

46 Day(s) or Less

48 Day(s) or Less

61 Day(s) or Less

71 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Two-Circuit Limit Switch [WL-N/WL]

Basic Information

Configure

Specification/Dimensions

Detector Shape

Environment

Plunger Shape Type

Boot Seal

Roller Lever Shape Type

Rod Shape Type

Force Required for Push Side O.F.(N)

Contact Type

Rated Operating Voltage(V)

Rated Conductance Current(A)

Cable Specifications

Detector element details

Indicator Light

Movement After the Operation OT(mm)

Operating Position OP(mm)

Conduit size

Specification of Terminal

Cord / cable length(m)

Details Type

O.D.

Function

Mounting system

Direction of Operation

Roller position

Contact format

Built-in Switch Specification

Connector Type

Wiring Specifications

Lever Tightening Specification

AC Rated Voltage

DC Rated Voltage

AC Electrical Rating details

DC Electrical Rating details

Head Material

Specifications

Application

type

CAD