PushOne A Series, Adapter Elbow (Part Numbers)

PushOne A Series, Adapter Elbow

No jigs or tools are required for connecting tubes to this adapter elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

· The tube is connected by PushOne®.
· No need for jigs nor tools to connect the tube.
· Electroless nickel plated.
· There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
· The white body brightens the working environment.
· Non-combustible PBT resin is used for the materials.
· Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
· Can be used in environments in which sputtering occurs.
· The R screws are sealed, and thus there is no need to wrap them with sealing tape.


Japanese Only

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipApplicable Tube O.D.1
Outer diameter D1 of the insertion part
14 Day(s) or more 44
Quote 66
14 Day(s) or more 88
14 Day(s) or more 1010
15 Day(s) or more 1212


  1. 1

Basic Information

Types Push One Fitting Fitting Type Socket and reducer Applicable Fluid Water / Air
Body Material Flame Retardant PBT Resin Application For general air pressure Thread Material Brass
Seal Material Special NBR Sockets, Reducers Adapter Elbows Appearance Color White
Operating Temperature Range (Air During use)(℃) -20~80 Operating Temperature Range (Water During use)(℃) 0~40 Plating Process Electroless Nickel Plating

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)