PushOne E Series, 90 Long Elbow

PushOne E Series, 90 Long Elbow

No jigs or tools are required for connecting tubes to this 90° long elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

· The tube is connected by Push One®.
· No need for jigs nor tools to connect the tube.
· Electroless nickel plated.
· There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
· Flame retardant resin (equivalent to UL94 V-0 standard) adopted.
· Noncombustible PBT resin is used for the materials.
· Superior self-extinguishing properties, equivalent to UL94 V-0 standard.
· Suitable for use use in environments where sputtering occurs.
· The R screws are sealed, so there is no need to wrap them with sealing tape


Japanese Only

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipApplicable Tube O.D.1
T Screw Size Types of connection screw
Quote 12.71/2R
20 Day(s) or more 12.71/4R
Quote 12.73/8R
14 Day(s) or more 6.35M5×0.8M
Quote 6.351/4R
Quote 6.351/8R
Quote 9.531/4R
Quote 9.533/8R
Quote 7.941/4R
Quote 7.941/8R
Quote 7.943/8R


  1. 1

Basic Information

Types Push One Fitting Fitting Type Screw Mount Direction Applicable Fluid Water / Air
Body Material Flame Retardant PBT Resin Application For general air pressure Thread Material Brass
Seal Material Special NBR Screw Mounting, Direction Elbow Elbows 90° Long Elbows
Operating Temperature Range (Air During use)(℃) -20~80 Operating Temperature Range (Water During use)(℃) 0~40 Plating Process No

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)