PushOne E Series, Manifold B Type (Part Numbers)

PushOne E Series, Manifold B Type

No jigs or tools are required for connecting tubes to this manifold. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

· The tube is connected by Push One®.
· No need for jigs or tools to connect the tube.
· Electroless nickel plating.
· There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
· Flame retardant resin (compliant with the UL94 V-0 standard) is used.
· Noncombustible PBT resin is used for the base material.
· Compliant with the UL94 V-0 standard and has superior self-extinguishing properties.
· Can be used in environments where sputtering is an issue.
· R screws are sealed, and thus there is no need to wrap them with sealing tape


Japanese Only

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipApplicable Tube O.D.1
T Screw Size Number of A Ports
39 Day(s) or more 41/46
42 Day(s) or more 41/410
Quote 61/46
Quote 61/410
42 Day(s) or more 83/86
42 Day(s) or more 83/810


  1. 1

Basic Information

Types Push One Fitting Fitting Type Union with different diameters Applicable Fluid Water / Air
Body Material Flame Retardant PBT Resin Application For general air pressure Thread Material Brass
Seal Material Special NBR Screw Mounting, Multipoint Manifold B Type Types of connection screw Rc
Operating Temperature Range (Air During use)(℃) -20~80 Operating Temperature Range (Water During use)(℃) 0~40 Plating Process Electroless Nickel Plating

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)