(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Adjustable Torque Controller Lever (ATCL) (Part Numbers)

Adjustable Torque Controller Lever (ATCL)

Click this image to zoom it.

Move the mouse over the image to zoom

  • Adjustable Torque Controller Lever (ATCL)
  • Adjustable Torque Controller Lever (ATCL)

[Features]
· Clamp lever with torque setting function / lever position can be changed.
· Tightening torque can be set.
· When the set torque is reached, there is a click feeling that confirms completion of tightening.

PDF

Adjustable Torque Controller Lever

Clamping handle with torque-setting function

Clamping handle with torque-setting function.

Dimensional Drawing

Dimensional drawing.

SizeRMHDH1H2D1H3H4ABWW1W2No. of TeethTorque Range
(N.m)
Tightening Force *1)
(kN)
ATCL 660M6 × 1402232441027.581330652121 to 3.50.8 to 2.9
ATCL 875M6 × 1.2548263852.5133391537862.52 to 5.41.3 to 3.4
ATCL1090M10 × 1.557324562.51639.510.51839103 to 81.5 to 4

*1) Use this tightening force as reference.

Tapped

Part NumberLfWeight
(g)
BlackOrange
ATCL 6-BKATCL 6-OG18160
ATCL 8-BKATCL 8-OG22270
ATCL10-BKATCL10-OG25445
Tapped type has a through hole. A bolt can be used in the through hole.

Tapped type has a through hole. A bolt can be used in the through hole.

Stud

Part NumberLWeight
(g)
BlackOrange
ATCL 6×15-BKATCL 6×15-OG15167
ATCL 6×20-BKATCL 6×20-OG20168
ATCL 6×25-BKATCL 6×25-OG25169
ATCL 6×30-BKATCL 6×30-OG30170
ATCL 8×20-BKATCL 8×20-OG20282
ATCL 8×25-BKATCL 8×25-OG25284
ATCL 8×30-BKATCL 8×30-OG30286
ATCL 8×40-BKATCL 8×40-OG40290
ATCL10×20-BKATCL10×20-OG20464
ATCL10×25-BKATCL10×25-OG25467
ATCL10×30-BKATCL10×30-OG30470
ATCL10×40-BKATCL10×40-OG40475

Usage method

1. Lift the handle to disengage the teeth from the ratchet.

1. Lift the handle to disengage the teeth from the ratchet.

2. Turn the lifted handle to the desired position.

2. Turn the lifted handle to the desired position.

3. When the hand is released, the lever is returned and clamped due to the force of the internal spring (teeth engage with the ratchet every 30°).

3. When the hand is released, the lever is returned and clamped due to the force of the internal spring (teeth engage with the ratchet every 30°).

4. Turn the handle to clamp. The handle clicks to indicate completed tightening to desired tightening torque

4. Turn the handle to clamp. The handle clicks to indicate completed tightening to desired tightening torque.

Torque Setting Method

1. Loosen the locking screw on the underside.

1. Loosen the locking screw on the underside.

2. Make fine adjustments to the torque by turning the torque-adjusting screw in the side of the body.

2. Make fine adjustments to the torque by turning the torque-adjusting screw in the side of the body.

3. Measure the torque with a torque wrench.

3. Measure the torque with a torque wrench.

  • Connect the torque wrench to the adjustable torque handle.
  • Apply load in the tightening direction and make fine adjustments to the depth of the torque-adjusting screw to reach the set torque indicated by the handle clicking.
4. When the set torque is reached, tighten the locking screw.

4. When the set torque is reached, tighten the locking screw.

Material

Lever

  • SCM440
  • Quenching and Tempering
  • Black, Orange

Ratchet

  • SCM415
  • Carburized
  • Black Oxide Coating

Notes

  • Adjust the torque-adjusting screw within the torque range. Do not loosen or tighten the screw too much.
  • The preset torque is roughly set to the maximum tightening torque.
Part Number
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSRotating Radius R
(mm)
Mounting Section Diameter (mm) and/or Diameter Mounting Section Length
(mm)
Tightening Force
(N)
Lever Color

Loading...

 

Basic Information

Application Clamp Type Clamp Clamp Mechanism / Ratchet mechanism Operation direction Horizontal
Shape L-Shaped L-Shaped Clamp Lever Shape Set Screw Type Mounting Section Type Male thread
Main Body/Lever Material SCM440 Main Body/Lever Surface Treatment Paint Mounting Section Material SCM415
Mounting Section Surface Treatment Black Oxide Coating Adjustment screw for gap No

Frequently asked question (FAQ)

Question: Can the screws be changed to stainless steel?
Answer: No.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)