(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Tangless Insert Manual Prewinder Tool for Metric Size (Insertion Only)

Tangless Insert Manual Prewinder Tool for Metric Size (Insertion Only)

Pre-winder type Tangless insert dedicated tool for Tangless insert insertion work.
[Features]
·It can be used for both free type and locking type insertion work.
·It can be used for insertion even under severe insertion conditions that are difficult for normal insertion tools (mandrel type).
[Applications]
·It is used for applying surface treatments such as alodine treatment or anodizing to the base material after tapping the pilot hole.
·It is ideal for the case where the pilot hole processing diameter is expected to be smaller than the specified value due to soft resin.
·It can be used for insertion work where friction with the base metal may become excessive during insert insertion.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

Specifications of Tangless Insert Manual Pre-Winder Tool

Conventional type manual tool by turning the lever handle for insertion.

Conventional type manual tool by turning the lever handle for insertion.

SizeProduct number
M2.52KPHM-2.5 (Former part number: TCIM-2.5)
M32KPHM-3 (Former part number: TCIM-3)
M42KPHM-4 (Former part number: TCIM-4)
M52KPHM-5 (Former part number: TCIM-5)
M62KPHM-6 (Former part number: TCIM-6)
M82KPHM-8 (Former part number: TCIM-8)

Specifications.

Part Number
2KPHM-2.5
2KPHM-5
2KPHM-6
2KPHM-8
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSSize
1 Piece(s) 10 Day(s) or more 10M2.5
1 Piece(s) 10 Day(s) or more 10M5
1 Piece(s) 10 Day(s) or more 10M6
1 Piece(s) 10 Day(s) or more 10M8

Loading...

  1. 1
 

Basic Information

Types Tool

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)