(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Self-Align Fittings H/DL/L/LL Series Male Connector H

Self-Align Fittings H/DL/L/LL Series Male Connector H

Self-aligning type pipe fittings by SMC Corporation.
[Features]
· A non-directional type metal sleeve tightening fitting.
· The sleeve helps protect against external damage.
· Low pressure loss.
· Can be used with soft copper pipes.
[Applications]
· Used for piping in the same direction from female threads.

(i)Caution

  • The minimum order quantity varies depending on the selected model. Please check the quotation / order screen for details.
  • Refer to the catalog for product specifications.
  • Product images may be representative images. Refer to the catalog for details.

PDF

Male Connector H Outline Drawing And Dimensions

Male Connector H outline drawing

Male Connector H outline drawing

Applicable tube outer diameter
mm
Connection thread
R
ModelH1
(width across flats)
H2
(width across flats)
LM*AEffective cross-sectional area
mm2
Weight
g
41/8H04-01101024.21521.1410
1/4H04-021428.623.117
61/8H06-01101224.21621.11112
1/4H06-021428.623.119
3/8H06-03173024.831
81/8H08-01121424.21621.12016
1/4H08-021428.623.121
3/8H08-03173024.830
101/4H10-02141728.61723.13428
3/8H10-03173024.837
1/2H10-042233.225.953
121/4H12-02171929.61724.15130
3/8H12-03173024.839
1/2H12-042233.225.959
  • *Reference dimensions after screwing in R thread

Self-Align Fittings H/DL/L/LL Series Common Specifications (Reference)

A non-directional type sleeve
The sleeve has no directionality and so there is no need to worry about mis-insertions leading to accidents or downtime.
The sleeve helps protect against external damage
The section of the sleeve which engages the workpiece is a single type, giving it a strong edge and ensuring external damage will not easily lead to impaired functionality.
Low pressure loss
Being a structure with no insert, there is only a small amount of flow resistance, allowing a large amount of flow-through.
The product series features a wide variety of models and sizes
There are 10 model types available, including the swivel type. The series includes 5 sizes with applicable tube outer diameters ranging from ø4 to 12 mm, allowing use in a wide range of applications.

Structure

Self-Align Fittings H/DL/L/LL series structure

Self-Align Fittings H/DL/L/LL series structure

Specifications

Applicable tube materialNylon tube, soft nylon tube, soft copper pipe (C1220T-O)
Applicable tube outer diameterø4, ø6, ø8, ø10, ø12
Maximum operating pressure1 MPa
Guaranteed pressure resistance10 MPa
Usable fluidsAir
ThreadMounting sectionJIS B0203 (tapered thread for pipes/tubes)
Nut sectionJIS B0205 (metric fine thread)
Threaded section sealant Note 1None or with sealant

Note 1: Male elbows, male branch tees and male run tees with sealants are manufactured to order. Add an 'S' to the end of the part number if you wish to include sealant.

Main Component Materials

Main bodyC3604, C3771BE
NutC3604
SleeveC2700
Part Number
H04-01
H04-01-X2
H04-01S
H04-01S-X2
H04-02
H04-02-X2
H04-02S
H04-02S-X2
H06-01
H06-01-X2
H06-01S
H06-01S-X2
H06-02
H06-02-X2
H06-02S-X2
H06-03
H06-03-X2
H06-03S
H06-03S-X2
H08-01
H08-01-X2
H08-01S
H08-01S-X2
H08-02
H08-02-X2
H08-02S-X2
H08-03
H08-03-X2
H08-03S
H08-03S-X2
H10-02
H10-02-X2
H10-02S
H10-02S-X2
H10-03
H10-03-X2
H10-03S
H10-03S-X2
H10-04
H10-04-X2
H10-04S
H10-04S-X2
H12-02
H12-02-X2
H12-02S
H12-02S-X2
H12-03
H12-03-X2
H12-03S
H12-03S-X2
H12-04
H12-04-X2
H12-04S-X2
Part NumberMinimum order quantityVolume DiscountDays to ShipSurface Treatment Connection screw Applicable Tube Size O.D.
(mm)
Sleeve material Sealant
1 Piece(s) Same day No1/84C2700-
10 Piece(s) Quote Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) Same day No1/44C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) Same day No1/86C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
1 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) Same day No1/46C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) Same day No3/86C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) Same day No1/88C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) Same day No1/48C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 40 Day(s) Nickel Plating---With sealant
1 Piece(s) Same day No3/88C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) Same day No1/410C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) 31 Day(s) No3/810C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) 31 Day(s) No1/210C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) 31 Day(s) No1/412C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) 31 Day(s) No3/812C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
1 Piece(s) 31 Day(s) No---With sealant
10 Piece(s) Quote Nickel Plating---With sealant
1 Piece(s) 31 Day(s) No1/212C2700-
1 Piece(s) 40 Day(s) Nickel Plating---None
10 Piece(s) Quote Nickel Plating---With sealant

Loading...

  1. 1
 

Basic Information

Connection Types Screw⇔Tube Connection Screw-to-Tube Connection Shape Half Unions Material Brass
Screw Types R

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)