(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Rectangular Multi-Connector KDM Series

Rectangular Multi-Connector KDM Series

Click this image to zoom it.

Move the mouse over the image to zoom

  • Rectangular Multi-Connector KDM Series
  • Rectangular Multi-Connector KDM Series
  • Rectangular Multi-Connector KDM Series
  • Rectangular Multi-Connector KDM Series

The multi-connector is effective for labor saving such as separation and transportation of the panel and machine, and unit replacement due to a failure.
[Features]
・ The mounting space is compact compared to the case where many panel bulkhead unions are used
・ A large number of pipes can be attached/detached with single-action, and moreover, there are no incorrect pipes and the labor-hours for installation is greatly reduced

(i)Caution

  • *See the catalog for detailed specs and materials.
  • Product images may be representative images. See the catalog for shape/type details.

PDF

Rectangular Multi-Connector KDM Series Specification

Rectangular Multi-Connector KDM: related images

KDM20 external appearance

Rectangular Multi-Connector KDM: related images

KDM10 external appearance

Rectangular Multi-Connector KDM: related images

KDM20 dimensional drawing

 

(Units: mm)

 

The dimensions within ( ) are for the KDM20-08

Rectangular Multi-Connector KDM: related images

KDM10 dimensional drawing

 

(Units: mm)

 

The dimensions within ( ) are for the KDM10-08

Model

Number of connection tubesTube outer diameterModelWeight gRelease button color
10 pcs.ø3.2KDM10-23300Blue
ø4KDM10-04
ø6KDM10-06
ø8KDM10-08520
20 pcs.ø3.2KDM20-23520
ø4KDM20-04
ø6KDM20-06
ø8KDM20-08950

Units: mm

Applicable Tube

  • Tube material: FEP, PFA, nylon, soft nylon, polyurethane
  • ø3.2 (tube outer diameter 3.2 mm), ø4 (tube outer diameter 4 mm), ø6 (tube outer diameter 6 mm), ø8 (tube outer diameter 8 mm)

Specifications

  • Usable fluids: air
  • Usable pressure range Note: -100 kPa to 1 MPa
  • Guaranteed Proof Pressure: 1.5 MPa
  • Ambient temperature and working fluid temperature: -5 to +60°C (no freezing)

Note: Do not use with a leak tester or for other forms of vacuum retention as they are not guaranteed for zero leakage.

Main Part Materials

Plug case, socket casePOM
Plate, bracketSPCC baked paint finish
Plug connector, socket connectorBodyPBT, C3604 (with electroless nickel plating [for ø8])
ChuckSUS304
GuideSUS304, C3604 (with electroless nickel plating), PBT (for ø8)
Collet, release buttonPOM
SealNBR
Clamp bolt, bracket screw, cross recessed round head screwSWRM (with nickel plating)
Type E retaining ringSUS304

Usage

Rectangular Multi-Connector KDM: related images

Separation

Loosen the clamp bolt to separate the plug side from the socket side.

Rectangular Multi-Connector KDM: related images

Connection

Align the two faces and connect the plug case to the socket. Tighten the clamp bolt by hand, then tighten it further with a hex wrench (M4).

Panel Mounting

Rectangular Multi-Connector KDM: related images

Image of bracket screw on socket side

1. Loosen the 4 bracket screws on the socket side with a Phillips screwdriver (JIS No. 2 size) until the bracket contacts the retaining ring.

Rectangular Multi-Connector KDM: related images

Image showing attachment to panel mount holes

2. Move the panel mount bracket to the inside (move the bracket screws longways in their holes) and attach to the panel mount holes. (Panel mount hole: dimensional drawing reference)

Rectangular Multi-Connector KDM: related images

Image of securing socket case

3. Using a Phillips screwdriver, move the bracket bolt to the outside and then tighten to secure the socket case.
4. To remove from the panel, loosen the bracket screw until it makes contact and then move inward to remove.

*See the manufacturer's catalog for product information other than the above.

Part Number
KDM10-04
KDM10-06
KDM10-08
KDM10-23
KDM20-04
KDM20-06
KDM20-08
KDM20-23
Part NumberMinimum order quantityVolume DiscountDays to ShipBody Material Application Applicable Tube O.D.1
(φ)
Number of Connection Tubes
(piece)
Release button color
1 Piece(s) 31 Day(s) [Brass] PBT + BrassStandard/Mini410Blue
1 Piece(s) 40 Day(s) [Brass] PBT + BrassStandard/Mini610Blue
1 Piece(s) 31 Day(s) [Brass] PBT + Brass (Electroless nickel plating)Standard/Mini810Blue
1 Piece(s) 31 Day(s) [Brass] PBT + BrassStandard/Mini3.210Blue
1 Piece(s) 31 Day(s) [Brass] PBT + BrassStandard/Mini420Blue
1 Piece(s) 40 Day(s) [Brass] PBT + BrassStandard/Mini620Blue
1 Piece(s) 31 Day(s) [Brass] PBT + Brass (Electroless nickel plating)Standard/Mini820Blue
1 Piece(s) 31 Day(s) [Brass] PBT + BrassStandard/Mini3.220Blue

Loading...

  1. 1

Basic Information

Types Single-Action Fitting Type Other shapes Applicable Fluid Air
Packing, Material of O-Ring NBR Other Shapes Multi-Connector Custom-made specifications N/A

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)