(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

S Coupler KK Series, Plug (P) Male Thread Type (KK6P-03MS)

S Coupler KK Series, Plug (P) Male Thread Type KK6P-03MS

S Coupler KK Series plug.
[Features]
・ Male thread type
・ The pulling strength of plug and socket improved by twice (Conventional ratio)
・ Effective cross-sectional area: 3.8 to 82 mm2
・ It is standardized with sleeve cover. Furthermore, the impact resistance is improved by changing the lock ring to impact resistant PBT
・ Since the structure does not use steel balls, it has a slim body without narrowing the flow path and has a large effective cross-sectional area
・ Structure with no spring installed in the flow path
・ Since the flow path is not blocked by the valve spring, the loss of effective cross-sectional area can be reduced
・ Check valve tip shape considering rectification effect
・ It enables smooth flow of fluid
・ Structure with little leakage
・ Surface contact ensures reliable sealing
・ It achieves a thorough weight reduction by adopting pressed parts and resin parts as well as downsizing the body
・ It standardizes quick-connect fitting type
・ It can be flown from either the plug side or the socket side
・ Sleeve lock mechanism prevents accidents due to unexpected detachment

(i)Caution

  • Refer to the catalog for product specs.
  • The product shown in the image may be a representative image. Refer to the catalog for product shapes and types.

PDF

Part Number

Configured Part Number is shown.

KK6P-03MS

S Coupler KK Series Plug Male Thread Type specifications

Common specifications (reference)

Operating fluidAir, water
Operating pressure rangeNote: KK2: -100 kPa to 1 MPa
KK3: -90 kPa to 1 MPa
KK4/6: 0 to 1 MPa
Guaranteed proof pressure1.5 MPa
Ambient temperature and working fluid temperatureAir: -5 to 60°C
Water: 5 to 40°C (no freezing)
Plating, sealWith electroless nickel plating (copper-free and fluorine-free application) and male thread sealant

Note: Do not use with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.

Performance

Plug/socket connection methodOne-touch connection
Check valveSocket: check valve built-in (standard)
Sleeve lock mechanismNote: Manual locking type (standard)

Note: The KK2 series does not include a lock mechanism.

Effective area

Body sizePlugEffective area mm2
M5KK2P-M5M3.8
1/8KK3P-01MS20
1/4KK4P-02MS39
1/2KK6P-04MS82

Flow rate characteristics

KK2 / Air (0 to 1 MPa)

KK2 / Air (0 to 1 MPa)

KK2 / Water (0 to 0.4 MPa)

KK2 / Water (0 to 0.4 MPa)

KK3, 4, 6 / Air (0 to 1 MPa)

KK3, 4, 6 / Air (0 to 1 MPa)

KK3, 4, 6 / Water (0 to 0.4 MPa)

KK3, 4, 6 / Water (0 to 0.4 MPa)

External appearance / dimensional drawing

KK2 external appearance

KK2 external appearance

KK2 dimensional drawing

KK2 dimensional drawing

KK3, 4, 6 external appearance

KK3, 4, 6 external appearance

KK3, 4, 6 dimensional drawing

KK3, 4, 6 dimensional drawing

Body sizeModelT
Connection port diameter
H
Width across flats
L1L2*AMinimum hole diameterEffective area mm2Weight
g
M5KK2P-M5MM5 × 0.8718.812.315.82.54.42.6
KK2P-01MSR1/81022.319.23.48.13.0
1/8KK3P-01MSR1/829.518.426.46.022.68.4
KK3P-02MSR1/41432.927.414.2
KK3P-03MSR3/81734.328.928.1
1/4KK4P-01MSR1/81436.125.233.017.0
KK4P-02MSR1/439.734.29.050.920.2
KK4P-03MSR3/81741.135.732.5
KK4P-04MSR1/22245.338.257.4
1/2KK6P-03MSR3/81946.931.041.511.076.044.7
KK6P-04MSR1/22251.144.013.0106.253.7
KK6P-06MSR3/4275545.594.4

*Reference dimensions after screwing in R thread.

One-touch connection

Easy to connect with one hand. Improved workability.

Connection method 1

Connection method 1

Connection method 2

Connection method 2

*Refer to the manufacturer's catalog for specifications other than those above.

Part Number
KK6P-03MS
Part NumberMinimum order quantityVolume DiscountDays to ShipSize of Body Pipe Connection Bore Dia.
1 Piece(s) 31 Day(s) 1/2R 3/8

Loading...

  1. 1

Basic Information

Type Standard Joint Type Threaded Type Male/Female Plug
Body Material C3604 Applicable Fluid Water / Air Valve Structure Single Passage Opening Closing Type
Operating Environment, Applications Standard With or Without Check Valve No

Please check the type/dimensions/specifications of the part KK6P-03MS in the S Coupler KK Series, Plug (P) Male Thread Type series.

Products like this...

Part Number
KK3P-01MS
KK3P-02MS
KK3P-03MS
KK4P-01MS
KK6P-04MS
KK6P-06MS
Part NumberMinimum order quantityVolume DiscountDays to ShipSize of Body Pipe Connection Bore Dia.
1 Piece(s) Same day 1/8R 1/8
1 Piece(s) 31 Day(s) 1/8R 1/4
1 Piece(s) 31 Day(s) 1/8R 3/8
1 Piece(s) 31 Day(s) 1/4R 1/8
1 Piece(s) 31 Day(s) 1/2R 1/2
1 Piece(s) 40 Day(s) 1/2R 3/4

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)