(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Speed Controller With Pilot Check Valve, ASP Series

Speed Controller With Pilot Check Valve, ASP Series

Cylinder temporary stop and cylinder speed control are possible.
[Features]
・ The pilot check valve and speed controller are integrated.
・ Tube mounting direction can be freely adjusted 360°
・ Electroless nickel plating specifications as standard
・ Available in metric size and inch size

(i)Caution

  • Product images may be representative images. Refer to the catalog for details

PDF

Speed Controller With Pilot Check Valve ASP Series Specifications

Speed Controller With Pilot Check Valve external appearance

Speed Controller With Pilot Check Valve external appearance

Example of drop prevention circuit

Example of drop prevention circuit

JIS symbol

JIS symbol

FluidAir
Proof pressure1.5 MPa
Maximum operating pressure1 MPa
Minimum operating pressure0.1 MPa
Pilot check valve operating pressure50% or more of the operating pressure (however, must be 0.1 MPa or more)
Ambient and fluid temperature-5 to +60°C (no freezing)
Applicable tubing materialNylon, soft nylon, polyurethane

*Use caution regarding the maximum operating pressure when using soft nylon or polyurethane tubing.

Dimensional Drawing of This Product (Metric Size)

Speed Controller With Pilot Check Valve, dimensional drawing (metric size)

Speed Controller With Pilot Check Valve, dimensional drawing (metric size)

 

(Units: mm)

 

ModeldT1T2H1H2D1D2D3L1L2L3L4*1L5A1*2A2*2MWeight
g
Max.MIN.
ASP330F-01-06S6R 1/8M5 × 0.812811.614.211.81438.422.939.634.638.635.210.513.732
ASP330F-01-08S815.215.844.728.238.933.918.735
ASP430F-02-06S6R 1/41/8171212.818.5151843.425.241.736.748.242.410.916.865
ASP430F-02-08S815.219.746.428.218.768
ASP530F-03-08S8R 3/81/8191215.22319.820.351.328.246.941.955.15014.418.7107
ASP530F-03-10S1018.523.154.132.620.8110
ASP630F-04-10S10R 1/21/4241718.528.626.525.964.232.664.857.369.461.818.320.8212
ASP630F-04-12S1220.96634.421.8215

*1: Reference dimensions.
*2: Reference dimensions of R thread after installation.

Dimensional Drawing of This Product (Inch Size)

Speed Controller With Pilot Check Valve dimensional drawing (inch size)

Speed Controller With Pilot Check Valve dimensional drawing (inch size)

 

(Units: inches)

 

ModeldT1T2H1H2D1D2D3L1L2L3L4*1L5A1*2A2*2MWeight g
Max.MIN.
ASP330F-N01-07S1/4 "NPT 1/810-32UNF1/2 "813.214.211.815.842.225.638.933.938.635.110.51735
ASP330F-N01-09S5/16 "15.244.728.218.7
ASP430F-N02-07S1/4 "NPT 1/4NPT 1/811/16 "1/2 "13.218.5151843.925.641.736.748.242.610.91768
ASP430F-N02-09S5/16 "15.246.428.218.7
ASP530F-N03-09S5/16 "NPT 3/8NPT 1/8191/2 "15.22319.820.351.328.246.941.955.150.314.418.7107
ASP530F-N03-11S3/8 "18.523.154.132.620.8116
ASP630F-N04-11S3/8 "NPT 1/2NPT 1/415/16 "11/16 "18.528.626.525.964.232.664.857.369.461.818.320.8220
ASP630F-N04-13S1/2 "21.726.566.334.721.8230

*1: Reference dimensions.
*2: Reference dimensions of NPT thread after installation.

Needle Valve: Flow Rate Characteristics

ASP330F Needle Valve: Flow Rate Characteristics

ASP330F Needle Valve: Flow Rate Characteristics

ASP430F Needle Valve: Flow Rate Characteristics

ASP430F Needle Valve: Flow Rate Characteristics

ASP530F Needle Valve: Flow Rate Characteristics

ASP530F Needle Valve: Flow Rate Characteristics

ASP630F Needle Valve: Flow Rate Characteristics

ASP630F Needle Valve: Flow Rate Characteristics

*The flow rate characteristics are representative values.

Precautions

  • *This product cannot be used for accurate and precise intermediate stopping of the actuator. Due to the compressibility of air as a fluid, the actuator will continue to move until it reaches a position of pressure balance, even though the pilot check valve closes with an intermediate stop signal.
  • *This product cannot be used to hold a stop position for an extended period of time. Pilot check valves and actuators are not guaranteed for zero air leakage. Therefore, it is sometimes not possible to hold a stop position for an extended period of time. In the event that holding for an extended time is necessary, a mechanical means for holding should be devised.
  • *Consider the release of residual pressure. Actuators may move suddenly due to residual pressure, which can be dangerous during maintenance procedures.
  • *When used in a balance control circuit, there are instances in which the check valve cannot release, even if the pilot pressure is 50% of the operating pressure. In these cases, the pilot pressure should be the same as the operating pressure.
  • *For reference, SMC has conducted endurance tests in which ON, OFF operation of the check valve was performed at the maximum operating pressure, with a confirmed endurance of 10 million operations. Sine the tests were performed under limited conditions, use caution in evaluating the results.
  • *The check valve has a construction in which it is closed by the differential pressure generated when the inlet pressure (IN side) or outlet pressure (OUT side) solenoid valve is switched. Be aware that the check valve does not close completely and the outlet pressure (OUT side) may drop when the inlet pressure (IN side) drops gently and the differential pressure becomes smaller than the minimum operating pressure or cracking pressure.
  • *When free flow is selected for the ASP, chattering may occur if it is operated under conditions where there is low differential pressure on either side of the ASP. Chattering may be reduced by increasing the diameter of the piping or selecting an ASP with a smaller body size; however, if this is not effective, we recommend using a perfect spacer in place of the ASP.
  • *See the manufacturer's catalog for product information other than the above.
Part Number
ASP330F-01-06S
ASP330F-01-08S
ASP330F-N01-07S
ASP430F-02-06S
ASP430F-02-08S
ASP430F-N02-07S
ASP430F-N02-09S
ASP530F-03-08S
ASP530F-03-10S
ASP530F-N03-09S
ASP530F-N03-11S
ASP630F-04-10S
ASP630F-04-12S
ASP630F-N04-11S
ASP630F-N04-13S
Part NumberMinimum order quantityVolume DiscountDays to ShipLock Nut Option Flow Rate
(l/min)
Types of Screw Cylinder Side Types of Screw Tube Side Applicable Tube O.D. mm
(mm)
Applicable Tube O.D. inch size
(inch)
Body Size Pipe Connection Bore Dia. Cylinder Side Pipe Connection Bore Dia. Electromagnetic Valve Side Made-to-order specifications
1 Piece(s) Same day Hexagon Shape Lock Nut180RM6-1/8 Standard1/85 × 0.8None
1 Piece(s) Same day Hexagon Shape Lock Nut180RM8-1/8 Standard1/85 × 0.8None
1 Piece(s) 31 Day(s) Hexagon Shape Lock Nut180NPTUNF-1/41/8 standard1/810-32None
1 Piece(s) Same day Hexagon Shape Lock Nut330RRc6-1/4 Standard1/41/8None
1 Piece(s) Same day Hexagon Shape Lock Nut350RRc8-1/4 Standard1/41/8None
1 Piece(s) 31 Day(s) Hexagon Shape Lock Nut350NPTNPT-1/41/4 standard1/41/8None
1 Piece(s) 31 Day(s) Hexagon Shape Lock Nut350NPTNPT-5/161/4 standard1/41/8None
1 Piece(s) Same day Hexagon Shape Lock Nut600RRc8-3/8 Standard3/81/8None
1 Piece(s) Same day Hexagon Shape Lock Nut750RRc10-3/8 Standard3/81/8None
1 Piece(s) 31 Day(s) Hexagon Shape Lock Nut600NPTNPT-5/163/8 standard3/81/8None
1 Piece(s) 31 Day(s) Hexagon Shape Lock Nut750NPTNPT-3/83/8 standard3/81/8None
1 Piece(s) Same day Hexagon Shape Lock Nut1100RRc10-1/2 Standard1/21/4None
1 Piece(s) 31 Day(s) Hexagon Shape Lock Nut1190RRc12-1/2 Standard1/21/4None
1 Piece(s) 31 Day(s) Hexagon Shape Lock Nut1190NPTNPT-3/81/2 standard1/21/4None
1 Piece(s) 31 Day(s) Hexagon Shape Lock Nut1190NPTNPT-1/21/2 standard1/21/4None

Loading...

  1. 1

Basic Information

Type Speed Controller Format Dual Control Method Meter Out / In
Joint Type Male thread + One-Touch Couplings Material PBT Environment, Applications Standard
Thread Material Stainless Steel Knob Type Resin Ambient Temperature and Working Fluid Temperature(°C) -5::60
Operating Pressure Range(MPa) 0.1::1

Tech Support