(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Pressure Gauge For Clean Series (10-Series) G49 Series

Pressure Gauge For Clean Series (10-Series) G49 Series

A pressure gauge for the clean series (10-series)

(i)Caution

  • Product images may be representative images. Refer to the manufacturer's catalog for details

PDF

Pressure Gauge For Clean Series (10-Series) G49 Specifications

 

(Unit: mm)

 

Pressure Gauge For Clean Series (10-Series) G49 external appearance

Pressure Gauge For Clean Series (10-Series) G49 external appearance

Pressure Gauge For Clean Series (10-Series) G49 dimensional drawing

Pressure Gauge For Clean Series (10-Series) G49 dimensional drawing

*The dimensions within ( ) are for port size R1/4.

Standard Specifications (*Installation of a filter on the breathing hole [filtration 3 μm] enables a unit to curb particle generation from the pressure gauge)

  • Port size (*1): R1⁄8, R1⁄4
  • Fluid (*2): air
  • Indication precision (*3): ±3% F.S. (full span)
  • Weight: 0.095 kg
  1. *1 When mounting the pressure gauge, take care not to over-tighten. Excessive tightening will cause damage. Use pipe tape for sealing.
  2. *2Take care to avoid freezing. This may result in a malfunction.
  3. *3The guaranteed temperature range is 23°C±5°C.

Model

ModelPressure range*1Indication unitPort sizeNote
MPa
G49-2-020 to 0.2MPaR 1/4-
G49-7-020 to 0.7
G49-10-020 to 1.0

*1: Do not apply pressure more than the maximum display pressure. This may result in a malfunction.

Precautions

Selection

  1. *1Do not apply high load voltage (current) or surge current. This can cause the switch to malfunction.
  2. *2Make sure that no direct impact or vibrations are applied to the body.
  3. *3If operating under pressure pulsations or in high-frequency operations, please contact the manufacturer's support center.

Mounting

  1. *1 During transport and installation, protect the product from impacts, for example from accidental dropping. This can affect the product's precision.
  2. *2Install the product perpendicular to the ground, with the zero point on the reading of the pressure gauge facing down.
  3. *3Do not install it in an area that is exposed to high temperature or humidity. This may result in a malfunction.
  4. *4To screw in the pressure gauge, make sure to turn the gauge by placing a wrench over the square wrench flats. If the pressure gauge is screwed in by holding it on some other area, air leakage or damage may result.

Other

  • *Be sure to read the selection and installation precautions before use.
  • *See the manufacturer's catalog for information other than the above.
Part Number
G49-2-01
G49-2-02
G49-4-02
G49-7-02
G49-10-01
G49-10-02
Part NumberMinimum order quantityVolume DiscountDays to ShipType Maximum Indicated Pressure
(Mpa)
Outer Diameter
(φ)
Maximum Indicated Pressure Connection screw
1 Piece(s) 31 Day(s) ---0.2 MPaR 1⁄8
1 Piece(s) 31 Day(s) ---0.2 MPaR1/4
1 Piece(s) 31 Day(s) Stainless Steel / Clean Pressure Gauge0.4440.4 MPaR1/4
1 Piece(s) 31 Day(s) ---0.7 MPaR1/4
1 Piece(s) 31 Day(s) Stainless Steel / Clean Pressure Gauge1441.0 MPaR 1⁄8
1 Piece(s) 31 Day(s) Stainless Steel / Clean Pressure Gauge1441.0 MPaR1/4

Loading...

  1. 1

Basic Information

Shape Back side thread

Tech Support