(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Box-Type Vacuum Ejector (Built-In Silencer) ZH Series

Box-Type Vacuum Ejector (Built-In Silencer) ZH Series

Lightweight and compact vacuum ejector.
[Features]
· Single-action and screw-in connections can be combined
・ Body can be attached and fixed
・ Enclosure type (built-in silencer) type

(i)Caution

  • The product images are representative images only. Please refer to the manufacturer's catalog for details of the types available

PDF

Box Type Vacuum Ejector (Built-In Silencer) ZH Series Specifications

Box type / B-type external appearance

Box type / B-type external appearance

Box Type (Built-In Silencer) ZH□□B Ejector display symbols

Box Type (Built-In Silencer) ZH□□B Ejector display symbols

Box type (built-in silencer) structural drawing

Box type (built-in silencer) structural drawing

ModelNozzle Diameter
mm
Body Type*Maximum Vacuum Pressure
kPa
Maximum Suction Flow Rate
L/min (ANR)
Air Consumption
L/min (ANR)
Connection
(One-touch/screw-in)
Weight
(g)
S-TypeL-TypeS-TypeL-TypeS-type/L-typeSUPVACEXH
ZH05B□0.5Box type
(Built-in silencer)
-88-485813ø6 mm, Rc 1/8
G 1/8
ø6 mm, Rc 1/8
G 1/8
-28
ZH07B□0.712202328
ZH10B□1.024344633
ZH13B□1.3407078ø8 mm, Rc 1/8
G 1/8
ø10 mm, Rc 1/8
G 1/8
66

*At a supply pressure of 0.45 MPa.
Fluid: air, Operating temperature: 5 to 50°C, Maximum operating pressure: 0.6 MPa, Standard supply pressure: 0.45 MPa

Box Type (Built-in Silencer) ZH□BS/L-□-□ dimensional drawing

 

(Unit: mm)

 

One-Touch Connection

One-touch connection dimensional drawing

One-touch connection dimensional drawing

ModelAøBCDEFGH
ZH05BS-06-06606221616.828547
ZH05BL-06-06
ZH07BS-06-06
ZH07BL-06-06
ZH10BS-06-06636231816.829550
ZH10BS-06-06
ZH13BS-08-1078827.52318.735761
ZH13BS-08-10
ModelIJøKLøMøNOP
ZH05BS-06-065716.83.22465.8231
ZH05BL-06-06
ZH07BS-06-06
ZH07BL-06-06
ZH10BS-06-066016.83.22665.8232
ZH10BL-06-06
ZH13BS-08-1075214.228107.5338.5
ZH13BL-08-10

One-Touch Connection + Screw-In Connection dimensional drawing

One-Touch Connection + Screw-In Connection dimensional drawing

One-Touch Connection + Screw-In Connection dimensional drawing

ModelAøBCDEFGH
ZH05BS-06-0160629.51616.828547
ZH05BL-06-01
ZH07BS-06-01
ZH07BL-06-01
ZH10BS-06-0163630.51816.829550
ZH10BL-06-01
ZH13BS-08-0278838.52318.735761
ZH13BL-08-02
ZH05BS-06-F0160629.51616.828547
ZH05BL-06-F01
ZH07BS-06-F01
ZH07BL-06-F01
ZH10BS-06-F0163630.51816.829550
ZH10BL-06-F01
ZH13BS-08-F02788392318.735761
ZH13BL-08-F02
ModelIJøKLMøNOP
ZH05BS-06-0157123.224Rc 1/85.8238.5
ZH05BL-06-01
ZH07BS-06-01
ZH07BL-06-01
ZH10BS-06-0160123.226Rc 1/85.8239.5
ZH10BL-06-01
ZH13BS-08-0275174.228Rc 1/47.5349.5
ZH13BL-08-02
ZH05BS-06-F0157123.224G 1/85.8238.5
ZH05BL-06-F01
ZH07BS-06-F01
ZH07BL-06-F01
ZH10BS-06-F0160123.226G 1/85.8239.5
ZH10BL-06-F01
ZH13BS-08-F0275174.228G 1/47.5350
ZH13BL-08-F02

*Contact the manufacturer's support center for combinations other than those listed above.

Exhaust Characteristics / Flow Rate Characteristics

ZH05□S exhaust characteristics (left) / flow rate characteristics (right)

ZH05□S exhaust characteristics (left) / flow rate characteristics (right)

ZH05□L exhaust characteristics (left) / flow rate characteristics (right)

ZH05□L exhaust characteristics (left) / flow rate characteristics (right)

ZH07□S exhaust characteristics (left) / flow rate characteristics (right)

ZH07□S exhaust characteristics (left) / flow rate characteristics (right)

ZH07□L exhaust characteristics (left) / flow rate characteristics (right)

ZH07□L exhaust characteristics (left) / flow rate characteristics (right)

*Flow rate characteristics are with a supply pressure of 0.45 MPa.

How to Read Flow Rate Characteristics Graphs

Example flow rate characteristics

Example flow rate characteristics

The flow rate characteristics show the relationship between the vacuum pressure and the suction flow rate of the ejector. It also shows that as the suction flow rate changes, so too does the vacuum pressure. Generally, the relationship shown is at the standard working pressure for the ejector.
In the diagram, Pmax denotes the maximum vacuum pressure, and Qmax denotes the maximum suction flow rate. These values are the values listed as the specifications in the manufacturer's catalog and elsewhere.
Changes in vacuum pressure are expressed in the order below.

  1. 1. When the ejector suction port is closed and sealed, the suction flow rate is 0 and the vacuum pressure is at its maximum (Pmax).
  2. 2. As the suction port is gradually opened and air begins to flow (leak), the suction flow rate increases and the vacuum pressure decreases. (State of P1 and Q1)
  3. 3. As the suction port opens further and on to the fully opened state, the suction flow rate reaches its maximum value (Qmax), and the vacuum pressure becomes close to 0 (atmospheric pressure). Thus, as the suction flow rate changes, so too does the vacuum pressure. In other words, if there is no leak in the vacuum port, the vacuum pressure will be at its highest level. As the leakage amount increases, the vacuum pressure decreases and becomes close to 0 when the leakage amount and the maximum suction flow rate become equal.
    Be aware that when suctioning a workpiece that is breathable or has a leak, the vacuum pressure will not be very high.

Notes

  • Mounting: Be careful not to apply an excessive load or generate moments to the ejector body via the connection port or by mounting.
  • Exhaust piping: On the ZH□□B□ models, keep exhaust ports open on at least one side.
  • Selection and sizing: Refer to the manufacturer's catalog for information on how to select vacuum equipment models.
  • *Refer to the manufacturer's catalog for product information not detailed above.
Part Number
ZH05BL-06-01
ZH05BL-F01-F01
ZH05BS-01-01
ZH05BS-06-01
ZH05BS-06-F01
ZH05BS-F01-F01
ZH07BL-01-01
ZH07BL-06-01
ZH07BL-06-06
ZH07BL-06-F01
ZH07BL-F01-F01
ZH07BS-01-01
ZH07BS-06-01
ZH07BS-06-06
ZH07BS-06-F01
ZH07BS-F01-F01
ZH10BL-01-01
ZH10BL-06-01
ZH10BL-06-06
ZH10BL-06-F01
ZH10BL-F01-F01
ZH10BS-01-01
ZH10BS-06-01
ZH10BS-06-06
ZH10BS-06-F01
ZH10BS-F01-F01
ZH13BL-01-02
ZH13BL-08-02
ZH13BL-08-10
ZH13BL-08-F02
ZH13BL-F01-F02
ZH13BS-01-02
ZH13BS-08-02
ZH13BS-08-10
ZH13BS-08-F02
ZH13BS-F01-F02
Part NumberMinimum order quantityVolume DiscountDays to ShipUltimate Vacuum
(kPa)
Air Consumption Flow Rate
(l/min)
Vacuum Port Connecting Port Shape Vacuum Port One-Touch Fitting Size Air Supply Port Connecting Port Shape Air Supply Port One-Touch Fitting Size Suction Flow
(l/min)
Nozzle Dia.
1 Piece(s) 31 Day(s) -4813Rc1/8-One-Touch CouplingØ680.5mm
1 Piece(s) Quote -4813[Others] G1/8-G1/8-80.5mm
1 Piece(s) 31 Day(s) -8813Rc1/8-Rc1/8-50.5mm
1 Piece(s) 31 Day(s) -8813Rc1/8-One-Touch CouplingØ650.5mm
1 Piece(s) 31 Day(s) -8813[Others] G1/8-One-Touch CouplingØ650.5mm
1 Piece(s) Quote -8813[Others] G1/8-G1/8-50.5mm
1 Piece(s) 31 Day(s) -4823Rc1/8-Rc1/8-200.7mm
1 Piece(s) 31 Day(s) -4823Rc1/8-One-Touch CouplingØ6200.7mm
1 Piece(s) 31 Day(s) -4823One-Touch CouplingØ6One-Touch CouplingØ6200.7mm
1 Piece(s) Quote -4823[Others] G1/8-One-Touch CouplingØ6200.7mm
1 Piece(s) Quote -4823[Others] G1/8-G1/8-200.7mm
1 Piece(s) 31 Day(s) -8823Rc1/8-Rc1/8-120.7mm
1 Piece(s) 40 Day(s) -8823Rc1/8-One-Touch CouplingØ6120.7mm
1 Piece(s) Same day -8823One-Touch CouplingØ6One-Touch CouplingØ6120.7mm
1 Piece(s) Quote -8823[Others] G1/8-One-Touch CouplingØ6120.7mm
1 Piece(s) Quote -8823[Others] G1/8-G1/8-120.7mm
1 Piece(s) 31 Day(s) -4846Rc1/8-Rc1/8-341.0mm
1 Piece(s) 31 Day(s) -4846Rc1/8-One-Touch CouplingØ6341.0mm
1 Piece(s) Same day -4846One-Touch CouplingØ6One-Touch CouplingØ6341.0mm
1 Piece(s) Quote -4846[Others] G1/8-One-Touch CouplingØ6341.0mm
1 Piece(s) 31 Day(s) -4846[Others] G1/8-G1/8-341.0mm
1 Piece(s) Same day -8846Rc1/8-Rc1/8-241.0mm
1 Piece(s) 31 Day(s) -8846Rc1/8-One-Touch CouplingØ6241.0mm
1 Piece(s) Same day -8846One-Touch CouplingØ6One-Touch CouplingØ6241.0mm
1 Piece(s) 31 Day(s) -8846[Others] G1/8-One-Touch CouplingØ6241.0mm
1 Piece(s) 31 Day(s) -8846[Others] G1/8-G1/8-241.0mm
1 Piece(s) Same day -4878Rc1/4-Rc1/8-70[Others] 1.3mm
1 Piece(s) 31 Day(s) -4878Rc1/4-One-Touch CouplingØ870[Others] 1.3mm
1 Piece(s) 31 Day(s) -4878One-Touch CouplingØ10One-Touch CouplingØ870[Others] 1.3mm
1 Piece(s) 31 Day(s) -4878[Others] G1/4-One-Touch CouplingØ870[Others] 1.3mm
1 Piece(s) Quote -4878[Others] G1/4-G1/8-70[Others] 1.3mm
1 Piece(s) Same day -8878Rc1/4-Rc1/8-40[Others] 1.3mm
1 Piece(s) Same day -8878Rc1/4-One-Touch CouplingØ840[Others] 1.3mm
1 Piece(s) Same day -8878One-Touch CouplingØ10One-Touch CouplingØ840[Others] 1.3mm
1 Piece(s) 31 Day(s) -8878[Others] G1/4-One-Touch CouplingØ840[Others] 1.3mm
1 Piece(s) 31 Day(s) -8878[Others] G1/4-G1/8-40[Others] 1.3mm

Loading...

  1. 1

Basic Information

Type Unit Additional Function Silencers Application Single Item
Operating Pressure Range(MPa) 0.45::0.6 Operating Temp. Range(°C) 5:50

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)