(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Clean Gas Filter: Disposable Type / Multiple Disc Type, SFC100 Series

Clean Gas Filter: Disposable Type / Multiple Disc Type, SFC100 Series

Highly reliable fluoropolymer membrane clean gas filter.
[Features]
·Element cannot be replaced
·Precision filtration of compressed air and nitrogen for semiconductor processes
·Filtration degree 0.01 µm (filtration efficiency 99.99%)
·Disposable type, multiple disc type
·Connection method: Rc, TSJ, URJ
·Nominal pipe thread size: 1/4, 3/8

(i)Caution

  • ■ SMC Product Line
    Webpages for products currently without individual pages on this site will be released on an ad-hoc basis
    Click here for a quotation or to make an order if you have a model number

    ■ Products Planned for Online Release
    Air cylinder-related product pages will be released on this site on an ad-hoc basis.
    CQ2, MG types, etc., are already available. Click here to check.
    *Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
  • See catalog for specification details.
  • Product images may be representative images. Refer to the catalog for details.

PDF

Clean Gas Filter: Disposable Type / Multiple Disc Type, SFC100 Series Specifications

Disposable Type / Multiple Disc Type, SFC100 Series external appearance

Disposable Type / Multiple Disc Type, SFC100 Series external appearance

SFC10□ flow rate characteristics graph

SFC10□ flow rate characteristics graph

Fluid: Compressed air / Inlet temperature: 20°C

Applicable FluidAir, nitrogen
Operating Pressure*1MAX. 0.99 MPa, Vacuum 1.3 × 10-6 kPa
Operating Temperature5 to 120℃
Element Proof Differential PressureMAX. 0.42 MPa
Element Reverse Differential PressureMAX. 0.07 MPa
Filtration*20.01 μm (filtration efficiency 99.99%)
Helium Leak Volume4.0 × 10-9 Pa・m3/sec or less
Main MaterialCaseSUS316 (Interior/Exterior: Electrolytic polishing)
Filtration MediumPTFE membrane
SealPTFE

*1: The maximum operating pressure is 0.99 MPa since this product does not conform to the High Pressure Gas Safety Law (Japan). Ensure that, if 0.1 MPa is exceeded, there is no pressure fluctuation during use.
*2: Measured under manufacturer's specified conditions.

Model

ModelRated Flow L/min (ANR)*ConnectionFiltration Area cm2Weight (kg)
SFC100-02240Rc 1/4 (female thread)3000.35
SFC100-03Rc 3/8 (female thread)0.36
SFC102-02TSJ 1/40.40
SFC102-03TSJ3/80.41
SFC105-02URJ 1/40.44
SFC105-03URJ3/80.49

*At inlet pressure of 0.7 MPa and pressure drop of 0.02 MPa.

Product Diagram

Disposable Type / Multiple Disc Type, SFC100 Series diagram

Disposable Type / Multiple Disc Type, SFC100 Series diagram

NumberPart nameMaterialNote
1Case 1SUS 316Electrolytic polishing (interior/exterior)
2Case 2
3ElementPTFE, PVDF-
4O-ringPTFE-
5SpacerPVDF-

Product Outline Dimensional Drawing

 

(Unit: mm)

 

SFC100-02/SFC100-03 dimensional drawing

SFC100-02/SFC100-03 dimensional drawing

  • SFC100-02: A / Rc 1/4
  • SFC100-03: A / Rc 3/8
 

 

(Unit: mm)

 

SFC102-02/SFC102-03 dimensional drawing

SFC102-02/SFC102-03 dimensional drawing

  • SFC102-02: A / TSJ 1/4 (Tube Swage Joint)
  • SFC102-03: A / TSJ 3/8 (Tube Swage Joint)
 

 

(Unit: mm)

 

SFC105-02/SFC105-03 dimensional drawing

SFC105-02/SFC105-03 dimensional drawing

  • SFC105-02: A / URJ 1/4 (Union Ring Joint), B / 22 mm, C / 19 mm
  • SFC105-03: A / URJ 3/8 (Union Ring Joint), B / 26.5 mm, C / 22 mm

Precautions

  • *Ensure that you read the specific product precautions prior to use.
  • *Confirm the specifications. The Clean Gas Filter is designed for use with compressed air and nitrogen gas only. Do not use with fluids (gases) other than those stated in the specifications, and do not exceed the specified ranges for pressure or temperature, as this will cause damage, etc.
  • *Select a product according to the maximum consumption flow rate. When using compressed air for air blow applications, etc., calculate the maximum volume of air that will be consumed before selecting the SF□ series product size. (Using a product that exceeds the maximum air flow and running excessive compressed air can cause the cleanliness of the compressed air to deteriorate and/or damage the element.)
  • *Set the processing flow rate with an initial pressure drop of 0.02 MPa or less. If the initial pressure drop is set too high, the service life will be shorter due to clogging.
  • *See the manufacturer's catalog for product information other than the above.
  • *Product pictures are example representations for the product series. Please be aware that actual product specifications may be different.
Part Number
SFC100-02
SFC100-03
SFC102-02
SFC102-03
SFC105-02
SFC105-03
Part NumberMinimum order quantityVolume DiscountDays to ShipConnection Type Plumbing Thread Nominal
1 Piece(s) 20 Day(s) [Rc (R)] Rc1/4
1 Piece(s) 20 Day(s) [Rc (R)] Rc3/8
1 Piece(s) Quote TSJ1/4
1 Piece(s) 31 Day(s) TSJ3/8
1 Piece(s) 31 Day(s) URJ1/4
1 Piece(s) 31 Day(s) URJ3/8

Loading...

  1. 1

Basic Information

Type Standard Compressed Air Quality General Dry Air Filtration Level 0.01μm
Treatment Air Flow Rate(l/min) 240 Operating Environment Clean Room Specifications (Prevent dust) Drain Cock No
Bowl Material SUS316 Bowl Guard No Operating Pressure Range(MPa) null::0.99

Tech Support