(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Smooth Cylinder CS2Y Series (Part Numbers)
[Features]
· Air cylinder designed with low piston friction, ideal for applications such as contact pressure control, which requires smooth movements at low pressures
· Low sliding resistance with minimum operating pressure of 0.005 MPa
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
Smooth Cylinder CS2Y Series Specifications
JIS symbol of CS2Y Series Smooth Cylinder: double acting, without cushion
Specifications
| Tube Inner Diameter (mm) | 125 | 140 | 160 |
|---|---|---|---|
| Action | Double acting, single rod | ||
| Direction of low friction | Bidirectional | ||
| Fluid | Air | ||
| Proof Pressure | 1.05 MPa | ||
| Maximum operating pressure | 0.7 MPa | ||
| Ambient and Working Fluid Temperature | Without auto switch: 0 ℃ to 70 ℃ (no freezing) With auto switch: 0 ℃ to 60 ℃ (no freezing) | ||
| Allowable leakage rate | 0.5 L/min (ANR) or less | ||
| Cushioning | None* (versions with cushion can be manufactured) | ||
| Lubrication | Not required (non-lube) | ||
| Mounting | Basic type, foot type, rod-end flange type, head-end flange type Single clevis type, double clevis type, center trunnion type | ||
- *If an air cushion is not used, set the energy at the stroke end to 0.36 J or less.
Maximum Stroke Table
(Units: mm)
| Tube Material | Aluminum alloy | Carbon steel pipe | |
|---|---|---|---|
| Tube Inner Diameter (mm) | Mounting Bracket | ||
| Basic Type / Head Flange Type Single Clevis Type / Double Clevis Type Center trunnion type Rod-end flange type | Basic type Head-end flange type Single clevis Double clevis type Center trunnion type | Foot type Rod-end flange type | |
| 125 | 1,000 or less | 1,000 or less | 1,600 or less |
| 140 | 1,000 or less | 1,000 or less | 1,600 or less |
| 160 | 1,200 or less | 1,200 or less | 1,600 or less |
Minimum operating pressure
(Units: MPa)
| Tube Inner Diameter (mm) | 125 | 140 | 160 |
|---|---|---|---|
| Minimum operating pressure | 0.005* | ||
- *For models with cushion, the pressure within the cushion stroke is not included.
Diagram
Diagram
Components
| Number | Name | Material | Notes |
|---|---|---|---|
| 1 | Rod cover | Diecast aluminum | Chromate |
| 2 | Head cover | Diecast aluminum | Chromate |
| 3 | Cylinder Tube | Aluminum alloy | Hard anodized aluminum |
| 4 | Piston | Aluminum alloy | Chromate |
| 5 | Piston rod | Carbon steel | Hard chrome plating |
| 6 | Bushing | Oil-impregnated sintered alloy | - |
| 7 | Tie-rod | Carbon steel | Zinc chromate |
| 8 | Tie-rod nut | Rolled steel | Nickel plated |
| 9 | Cushion Ring | Stainless steel | - |
| 10 | Cushion valve | Rolled steel | Nickel plated |
| 11 | Piston Nut | Carbon steel | Nickel plated |
| 12 | Flat Washer | Carbon steel | Nickel plated |
| 13 | Wear Ring | Resin | - |
| 14 | Magnet* | - | - |
| 15 | Retaining Ring | Spring steel | Phosphate coated |
| 16 | Rod packing | NBR | - |
| 17 | Cushion seal** | Urethane | - |
| 18 | Piston packing | NBR | - |
| 19 | Valve packing | NBR | - |
| 20 | Tube gasket | NBR | - |
| 21 | Piston gasket | NBR | - |
- *Built-in magnet type with auto switch
- **Used only in products with cushion.
Replacement Parts / Seal Kit
| Tube Inner Diameter (mm) | Order Number | Content |
|---|---|---|
| 125 | CS2Y125A-PS | For products without cushion Component Part Numbers Set of (16), (18), (20) listed above |
| 140 | CS2Y140A-PS | |
| 160 | CS2Y160A-PS | |
| 125 | CS2Y125AA-PS | For products with cushions on both sides Component Part Numbers Set of (16), (17) (2 pcs.), (18), (20) listed above |
| 140 | CS2Y140AA-PS | |
| 160 | CS2Y160AA-PS | |
| 125 | CS2Y125AR-PS | For products with cushion on one side Component Part Numbers Set of (16), (17) (1 pc.), (18), (20) listed above |
| 140 | CS2Y140AR-PS | |
| 160 | CS2Y160AR-PS |
- *The seal kit does not include a grease pack.
Order with the following part number when only the grease pack is needed.
Grease pack part number: GR-L-005 (5 g), GR-L-010 (10 g), GR-L-150 (150 g)
- *Refer to p. 217 of the manufacturer's catalog for other models' dimensions, specifications, etc.
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Cushion | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Rod Tip Metal Fitting | Type of Mount Support | Bellows | Custom-made Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | Quote | 125 | 270 | Without cushion | Built-in magnet | Rc | None | - | - | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 350 | Without cushion | Built-in magnet | Rc | None | - | - | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 350 | Without cushion | Built-in magnet | Rc | J51 | 0.5 | 1 | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 350 | Without cushion | Built-in magnet | Rc | M9B | 0.5 | 1 | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | 31 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | ||
| 1 Piece(s) | Quote | 140 | 75 | Without cushion | Built-in magnet | Rc | M9BW | 0.5 | 2 | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 50 | Without cushion | Built-in magnet | Rc | None | - | - | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 50 | Without cushion | Built-in magnet | Rc | J51 | 0.5 | 1 | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 50 | Without cushion | Built-in magnet | Rc | M9B | 0.5 | 1 | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 200 | Without cushion | Built-in magnet | Rc | M9N | 0.5 | 2 | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 150 | Without cushion | Built-in magnet | Rc | M9BW | 1 | 2 | None | Single clevis | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 200 | Without cushion | Built-in magnet | Rc | None | - | - | None | Single clevis | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 140 | 50 | Without cushion | Built-in magnet | Rc | None | - | - | None | Single clevis | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 1,000 | With cushions on both sides | Built-in magnet | Rc | A54 | 3 | 2 | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 100 | With cushions on both sides | Built-in magnet | Rc | A54 | 3 | 2 | With double knuckle joint and rod end nut | U-Shaped Clevis Type | Nylon tarpaulin | With rod-end bracket | ||
| 1 Piece(s) | Quote | 125 | 100 | Without cushion | Built-in magnet | Rc | None | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 110 | Without cushion | Built-in magnet | Rc | None | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 400 | Without cushion | Built-in magnet | Rc | None | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 800 | Without cushion | Built-in magnet | Rc | A53 | 3 | 3 | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 900 | With cushions on both sides | Built-in magnet | Rc | A54 | 3 | 2 | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 1,100 | With cushions on both sides | Built-in magnet | Rc | None | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 1,100 | With cushions on both sides | Built-in magnet | Rc | A54 | 3 | 2 | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 1,100 | With cushions on both sides | Built-in magnet | Rc | A54 | 3 | 2 | With double knuckle joint and rod end nut | U-Shaped Clevis Type | Nylon tarpaulin | With rod-end bracket | ||
| 1 Piece(s) | Quote | 160 | 1,100 | Without cushion | Built-in magnet | Rc | None | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 1,100 | With cushions on both sides | Built-in magnet | Rc | None | - | - | None | Rod-end flange type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 1,100 | With cushions on both sides | Built-in magnet | Rc | A54 | 3 | 2 | With double knuckle joint and rod end nut | Rod-end flange type | Nylon tarpaulin | With rod-end bracket | ||
| 1 Piece(s) | Quote | 140 | 100 | Without cushion | Built-in magnet | Rc | None | - | - | None | Rod-end flange type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 140 | 107 | With cushions on both sides | Built-in magnet | Rc | None | - | - | None | Rod-end flange type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 140 | 150 | With cushions on both sides | Built-in magnet | Rc | None | - | - | None | Rod-end flange type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 200 | Without cushion | Built-in magnet | Rc | M9BW | 0.5 | 2 | None | Rod-end flange type | Heat-resistant tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 300 | Without cushion | Built-in magnet | Rc | M9BW | 0.5 | 2 | None | Rod-end flange type | Heat-resistant tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 400 | Without cushion | Built-in magnet | Rc | M9BW | 0.5 | 4 | None | Rod-end flange type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 1,200 | With cushions on both sides | Built-in magnet | Rc | A54 | 3 | 2 | With double knuckle joint and rod end nut | Foot | Nylon tarpaulin | With rod-end bracket | ||
| 1 Piece(s) | Quote | 125 | 125 | With cushions on both sides | Built-in magnet | Rc | M9BW | 3 | 1 | None | Foot | Heat-resistant tarpaulin | None | ||
| 1 Piece(s) | Quote | 140 | 800 | Without cushion | Built-in magnet | Rc | A54 | 0.5 | 2 | None | Foot | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 300 | Without cushion | Built-in magnet | Rc | M9BW | 0.5 | 3 | None | Foot | Heat-resistant tarpaulin | None | ||
| 1 Piece(s) | 20 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | ||
| 1 Piece(s) | Quote | 125 | 700 | Without cushion | Built-in magnet | Rc | J59 | 3 | 2 | None | Center trunnion type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 50 | Without cushion | Without magnet | Rc | - | - | - | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 270 | Without cushion | Without magnet | Rc | - | - | - | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 140 | 200 | Without cushion | Without magnet | Rc | - | - | - | None | Basic type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 130 | Without cushion | Without magnet | Rc | - | - | - | None | Single clevis | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 150 | Without cushion | Without magnet | Rc | - | - | - | None | Single clevis | Nylon tarpaulin | None | ||
| 1 Piece(s) | 31 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | ||
| 1 Piece(s) | Quote | 125 | 100 | Without cushion | Without magnet | Rc | - | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 100 | Without cushion | Without magnet | Rc | - | - | - | None | U-Shaped Clevis Type | Heat-resistant tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 130 | Without cushion | Without magnet | Rc | - | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 270 | Without cushion | Without magnet | Rc | - | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 270 | Without cushion | Without magnet | Rc | - | - | - | None | U-Shaped Clevis Type | Heat-resistant tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 250 | Without cushion | Without magnet | Rc | - | - | - | None | U-Shaped Clevis Type | Nylon tarpaulin | Material: stainless steel (piston rod: with hard chrome plating) | ||
| 1 Piece(s) | Quote | 125 | 200 | Without cushion | Without magnet | Rc | - | - | - | None | Rod-end flange type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 125 | 300 | With cushions on both sides | Without magnet | Rc | - | - | - | None | Rod-end flange type | Nylon tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 250 | Without cushion | Without magnet | Rc | - | - | - | None | Rod-end flange type | Nylon tarpaulin | Material: stainless steel (piston rod: with hard chrome plating) | ||
| 1 Piece(s) | Quote | 160 | 50 | Without cushion | Without magnet | Rc | - | - | - | None | Foot | Heat-resistant tarpaulin | None | ||
| 1 Piece(s) | Quote | 160 | 200 | With cushions on both sides | Without magnet | Rc | - | - | - | None | Center trunnion type | Nylon tarpaulin | None |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | Standard | Environment, Applications | Standard / Low Speed | Operating Pressure(MPa) | 0.005 to 0.7 |
Specification/Dimensions
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Cushion
-
Specifications
- Built-in magnet
- Without magnet
-
Port thread type
- Rc
-
Auto Switches
-
Lead Wire
- 0.5
- 1
- 3
-
The number of the switches
-
Rod Tip Metal Fitting
- None
- With double knuckle joint and rod end nut
-
Type of Mount Support
- Basic type
- Center trunnion type
- Foot
- Rod-end flange type
- Single clevis
- U-Shaped Clevis Type
-
Bellows
-
Custom-made Specifications
- Material: stainless steel (piston rod: with hard chrome plating)
- None
- With rod-end bracket
-
type
- CDS2Y
- CS2Y
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 20 Day(s) or Less
- 31 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy