(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Pin Clamp Cylinder (Diamond Type, Round Type)

SMC

Adjustable height for clamping a workpiece.
[Features]
· Possible to mount on 4 surfaces, and 2 auto switches on the same surface, for improved flexibility of system design.
· For improved workability, direct mounting is possible, no mounting hardware required.
· 55 types of guide pins.
· Fine adjustment of the clamping height is possible by selecting the type with shims.
· Optional locking mechanism can be selected.
· The D-P4DW auto switch is also mountable.
· 2 switches can be mounted on the same surface.

(i)Caution

See the catalog for specification details.
Product images may be representative images. Refer to the manufacturer's catalog for shape details.

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Model Number Notation

U Series Pin Clamp Cylinder CKQGU/CKQPU/CLKQGU/CLKQPU Series Specifications

Pin Clamp Cylinder external appearance

*The images for this series are representative images.

U Series external appearance (mounting tap: 2 × M10 × 1.5 / Pin hole: 2 × ø8 [diameter 8 mm] H7)

Taps top right: mounting hole (tap, pin hole) arrangement

Positioning and clamping can be done at the same time

Basic Specifications

Action			Double acting
Bore size			50 mm
Fluid			Air
Min. operating pressure			CKQ□: 0.1 MPa	CLKQ□ (with lock): 0.15 MPa^*
Max. operating pressure	Guide pin diameter	ø12.5 to 13.0 (diameter 12.5 to 13.0 mm)	0.7 MPa
Max. operating pressure	Guide pin diameter	ø14.5 to 30.0 (diameter 14.5 to 30.0 mm)	1.0 MPa
Proof pressure	Guide pin diameter	ø12.5 to 13.0 (diameter 12.5 to 13.0 mm)	1.0 MPa
Proof pressure	Guide pin diameter	ø14.5 to 30.0 (diameter 14.5 to 30.0 mm)	1.5 MPa
Ambient and fluid temperature			-10°C to +60°C (no freezing)
Cushion			None
Lubrication			Non-lube
Piston speed (clamp speed)			50 to 150 mm/sec
Port size (cylinder port)			1/4 (Rc, NPT, G)

*Minimum operating pressure is 0.2 MPa when cylinder part and locking part use the same piping.

Lock Specifications

Locking action	Spring locking (exhaust locking)
Unlocking pressure	0.2 MPa or more
Locking pressure	0.05 MPa or less
Locking direction	Lock at extended direction (clamp holding)
Port size (lock release port)	1/8 (Rc, NPT, G)
Holding force (maximum static load)	982 N

Clamping Force

(Unit: N)

Model	Guide pin diameter	Operating pressure MPa
Model	Guide pin diameter	0.2	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0
CKQG CKQP	ø12.5 to 13.0 (diameter 12.5 to 13.0 mm)	164.9	329.8	494.7	659.6	824.5	989.4	-	-	-
CKQG CKQP	ø14.5 to 30.0 (diameter 14.5 to 30.0 mm)	164.9	329.8	494.7	659.6	824.5	989.4	1,154.3	1,319.2	1,484.1
CLKQG CLKQP	ø12.5 to 13.0 (diameter 12.5 to 13.0 mm)	82.4	247.3	412.2	577.1	742.0	906.9	-	-	-
CLKQG CLKQP	ø14.5 to 30.0 (diameter 14.5 to 30.0 mm)	82.4	247.3	412.2	577.1	742.0	906.9	1,071.8^*1	1,236.7^*1	1,401.6^*1

*1 The lock holding force of the CLKQ□ is 982 N. Design the circuit such that the lock holding force is taken into consideration when the operating pressure exceeds 0.75 MPa. The operating pressure should not be greater than the lock holding force as it may cause wearing out and/or damage of the locking part and shorten the lock life and may lead to possible failure if applied with a load larger than the lock holding force.
*2 It takes approximately 0.3 seconds for the cylinder to operate to generate clamping force from an unclamping state (when no speed controller is installed). Design the circuit taking into consideration the time before the clamping force is generated.
*3 Determine the clamping force according to the strength of the workpiece. It can be damaged if the clamping force is too large.

Weight

(unit: kg)

Model	C(L)KQGU C(L)KQPU
Guide pin diameter (mm)	Without lock		With lock
Guide pin diameter (mm)	LOW	HIGH	LOW	HIGH
ø12.5 to 13.0 (diameter 12.5 to 13.0 mm)	1.63	1.8	2.15	2.32
ø14.5 to 15.0 (diameter 14.5 to 15.0 mm)	1.63	1.8	2.15	2.32
ø15.5 to 16.0 (diameter 15.5 to 16.0 mm)	1.64	1.81	2.15	2.32
ø17.5 to 18.0 (diameter 17.5 to 18.0 mm)	1.68	1.86	2.2	2.37
ø19.5 to 20.0 (diameter 19.5 to 20.0 mm)	1.69	1.87	2.2	2.38
ø24.5 to 25.0 (diameter 24.5 to 25.0 mm)	1.75	1.96	2.26	2.47
ø29.5 to 30.0 (diameter 29.5 to 30.0 mm)	1.79	2	2.31	2.51

CKQGUA50/CKQPUA50 external dimensional drawing

*Refer to the manufacturer's catalog for the positional relationship of the mounting surface and port.
*The figures below show the CKQGUA50-□RAHZ.

(Unit: mm)

CKQGUA50-□RAHZ dimensional drawing

(Unit: mm)

LOW type with shims dimensional drawing

(Unit: mm)

HIGH type with shims dimensional drawing

(Unit: mm)

LOW type dimensional drawing

(Unit: mm)

Round type guide pin shape dimensional drawing

(Unit: mm)

Diamond type guide pin shape dimensional drawing (ø17.5 [guide pin diameter 17.5 mm] or more)

(Unit: mm)

Hole diameter of workpiece	C	øD	ød	E	G	H		K	L		SR	W	øZ
Hole diameter of workpiece	C	øD	ød	E	G	LOW Type	HIGH Type	K	LOW Type	HIGH Type	SR	W	øZ
ø13 (diameter 13 mm)	9	ø30 (diameter 30 mm)	ø12.5 (diameter 12.5 mm)	≈ 10	33	Without shims 40 ±0.05	Without shims 70 ±0.05	6	204.5	234.5	4	-	ø36 (diameter 36 mm)
			ø12.7 (diameter 12.7 mm)	≒9
			ø12.8 (diameter 12.8 mm)	≒8
			ø12.8 (diameter 12.8 mm)	≒8		With shims 40	With shims 70
			ø12.9 (diameter 12.9 mm)	≒8
			ø13.0 (diameter 13.0 mm)	≒7
ø15 (diameter 15 mm)	11	ø30 (diameter 30 mm)	ø14.5 (diameter 14.5 mm)	≒9	34	Without shims 40 ±0.05	Without shims 70 ±0.05	7	205.5	235.5	5	-	ø36 (diameter 36 mm)
			ø14.7 (diameter 14.7 mm)	≒8
			ø14.8 (diameter 14.8 mm)	≒8
			ø14.8 (diameter 14.8 mm)	≒8		With shims 40	With shims 70
			ø14.9 (diameter 14.9 mm)	≒7
			ø15.0 (diameter 15.0 mm)	≒7
ø16 (diameter 16 mm)	11	ø30 (diameter 30 mm)	ø15.5 (diameter 15.5 mm)	≈ 10	34	Without shims 40 ±0.05	Without shims 70 ±0.05	7	205.5	235.5	5.5	-	ø36 (diameter 36 mm)
			ø15.7 (diameter 15.7 mm)	≒9
			ø15.8 (diameter 15.8 mm)	≒8
			ø15.8 (diameter 15.8 mm)	≒8		With shims 40	With shims 70
			ø15.9 (diameter 15.9 mm)	≒8
			ø16.0 (diameter 16.0 mm)	≒7
ø18 (diameter 18 mm)	12	ø35 (diameter 35 mm)	ø17.5 (diameter 17.5 mm)	≈ 10	37	Without shims 40 ±0.05	Without shims 70 ±0.05	7	208.5	238.5	6	6	ø40 (diameter 40 mm)
			ø17.7 (diameter 17.7 mm)	≒9
			ø17.8 (diameter 17.8 mm)	≒8
			ø17.8 (diameter 17.8 mm)	≒8		With shims 40	With shims 70
			ø17.9 (diameter 17.9 mm)	≒8
			ø18.0 (diameter 18.0 mm)	≒7
ø20 (diameter 20 mm)	13	ø35 (diameter 35 mm)	ø19.5 (diameter 19.5 mm)	≈ 10	39	Without shims 40 ±0.05	Without shims 70 ±0.05	8	210.5	240.5	7	7	ø40 (diameter 40 mm)
			ø19.7 (diameter 19.7 mm)	≒9
			ø19.8 (diameter 19.8 mm)	≒8
			ø19.8 (diameter 19.8 mm)	≒8		With shims 40	With shims 70
			ø19.9 (diameter 19.9 mm)	≒8
			ø20.0 (diameter 20.0 mm)	≒7
ø25 (diameter 25 mm)	16	ø40 (diameter 40 mm)	ø24.5 (diameter 24.5 mm)	≈ 10	39	Without shims 40 ±0.05	Without shims 70 ±0.05	8	210.5	240.5	9.5	7	ø47 (diameter 47 mm)
			ø24.7 (diameter 24.7 mm)	≒9
			ø24.8 (diameter 24.8 mm)	≒8
			ø24.8 (diameter 24.8 mm)	≒8		With shims 40	With shims 70
			ø24.9 (diameter 24.9 mm)	≒8
			ø25.0 (diameter 25.0 mm)	≒7
ø30 (diameter 30 mm)	18	ø40 (diameter 40 mm)	ø29.5 (diameter 29.5 mm)	≈ 10	39	Without shims 40 ±0.05	Without shims 70 ±0.05	8	210.5	240.5	11	9	ø47 (diameter 47 mm)
			ø29.7 (diameter 29.7 mm)	≒9
			ø29.8 (diameter 29.8 mm)	≒8
			ø29.8 (diameter 29.8 mm)	≒8		With shims 40	With shims 70
			ø29.9 (diameter 29.9 mm)	≒8
			ø30.0 (diameter 30.0 mm)	≒7

P: port thread type

Nil: Rc1/4
TN: NPT1/4
TF: G1/4

Precautions

Caution on Design

*There is a possibility of dangerous sudden action by cylinders if sliding parts of machinery are twisted due to external forces, etc.
In such cases, human injury may occur; e.g. by catching hands or feet in the machinery, or damage to the machinery itself may occur. Therefore, the machine should be adjusted to operate smoothly and designed to avoid such dangers.
*A protective cover is recommended to minimize the risk of personal injury.
If a stationary object and moving parts of a cylinder are in close proximity, personal injury may occur. Design the structure to avoid contact with the human body.
*Securely tighten all stationary parts and connected parts so that they will not become loose.
Especially when a cylinder operates with high frequency or is installed where there is a lot of vibration, ensure that all parts remain secure.
*Design the equipment so that the maximum theoretical force is not applied to the cylinder.
If the cylinder becomes damaged there is a danger of human injury and/or equipment damage.
*Select the mounting base by taking into consideration its rigidity because the cylinder applies a large amount of force.
Otherwise there is a danger of human injury and/or equipment damage.
*Consider the possibility of a decrease in circuit pressure when power is turned off.
If the cylinder is used for a clamping application there is a danger of the workpiece being released since the circuit pressure decreases when the power is turned off. Install safety equipment to prevent human injury and damage to machine and/or equipment. The same consideration should be given for hanging or lift applications to prevent dropping of a workpiece.
*Consider a possible loss of power source.
Measures should be taken to protect against bodily injury and equipment damage in the event that there is a loss of power to equipment controlled by pneumatics, electricity or hydraulics.
*Consider emergency stops.
Design so that human injury and/or damage to machinery and equipment will not be caused when machinery is stopped by a safety device under abnormal conditions, a power outage or a manual emergency stop.
*Consider the action when operation is restarted after an emergency stop or abnormal stop.
Design the machinery so that human injury or equipment damage will not occur upon restart of operation. When the cylinder has to be reset at the starting position, install manual safety equipment.
*Intermediate stop
In the case of the 3-position closed center of a valve, it is difficult to make a piston stop at the required position as accurately and precisely as with hydraulic pressure due to compressibility of air. Furthermore, since valves and cylinders, etc., are not guaranteed for zero air leakage, it may not be possible to hold a stopped position for an extended period of time. Contact the manufacturer's support center if it is necessary to hold a stopped position for an extended period. Do not intermediately stop the CLKQ cylinder during a locking operation because it will shorten the life of the cylinder.

Other precautions

*Be sure to read the safety precautions and individual product precautions before use.
*The photos show representative examples of the series. This product's specifications may differ.
*See the manufacturer's catalog for product information other than the above.

: 30; 45; 60

Part Number
CKQGUA50-125RAHZ
CKQGUA50-130RALZ
CKQGUA50-145RBLSZ
CKQGUA50-145RDLSZ
CKQGUA50-147RBHZ
CKQGUA50-147RBHZ-P3DWA
CKQGUA50-148RDHZ-P3DWA
CKQGUA50-148RDLSZ-P3DWA
CKQGUA50-148RDLZ-P3DWA
CKQGUA50-150RDLSZ-P3DWA
CKQGUA50-158RAHZ
CKQGUA50-160RAHZ
CKQGUA50-177RALSZ
CKQGUA50-178DAHSZ
CKQGUA50-178DBHSZ-P3DWASC
CKQGUA50-178DCHSZ-P3DWASC
CKQGUA50-178RAHZ-P4DWSC
CKQGUA50-178RBHSZ-P3DWASC
CKQGUA50-178RDHSZ-P3DWASC
CKQGUA50-198RALZ
CKQGUA50-198RDLSZ-P3DWA
CKQGUA50-199DAHZ
CKQGUA50-199RBLZ
CKQGUA50-245RALSZ-P4DWSE
CKQGUA50-248DAHSZ
CKQGUA50-248DAHSZ-P3DWASC
CKQGUA50-248DCHSZ
CKQGUA50-248DCHSZ-P3DWASC
CKQGUA50-248RAHSZ
CKQGUA50-248RAHSZ-P3DWASC
CKQGUA50-248RALZ
CKQGUA50-248RALZ-P3DWASC
CKQGUA50-248RBLSZ
CKQGUA50-298DCLSZ-P3DWASC
CKQGUA50-298RAHSZ
CKQGUB50-160RALSZ
CKQGUB50-160RCHSZ-P3DWASC
CKQGUB50-175DBLSZ
CKQGUB50-175RBLSZ
CKQGUB50-177DBHSZ-P3DWASC
CKQGUB50-177DBLSZ
CKQGUB50-177DDLSZ
CKQGUB50-177DDLSZ-P4DWSCS
CKQGUB50-248RBHSZ
CKQGUB50-248RBHSZ-P3DWASC
CKQGUB50-248RBHZ
CKQGUB50-248RBHZ-P3DWASC
CKQGUB50-248RDHSZ
CKQGUB50-248RDHSZ-P3DWASC
CKQGUB50-248RDHZ
CKQGUB50-248RDHZ-P3DWASC
CKQGUB50-298DCLSZ
CKQGUB50-298DCLSZ-P3DWASC
CKQGUB50-298RCLSZ
CKQGUB50-298RCLSZ-P3DWASC
CKQGUB50-298RDLSZ-P3DWASC
CKQGUB50TN-148RBLSZ
CKQPUA50-125RAH-P74L
CKQPUA50-145RAHS-P74L
CKQPUA50-147RCH-P74L

Minimum order quantity	Days to Ship	Cylinder Dia. (Ø)	Max. Pressure (MPa)	Clamping Force (kN)	Auto Switches	Lead Wire Length (m)	The number of the switches	Specifications	Clamp Side Lock	Mounting surface position	Port Screw Type	Guide Pin Diameter	Guide Pin Shape	Clamp Arm Position	Clamp Position Height	Shim	Connector type
1 Piece(s)	Quote	50	0.7	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø12.5	Round type	Same direction as port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	0.7	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø13	Round type	Same direction as port	LOW type (40 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø14.5	Round type	90° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø14.5	Round type	270° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø14.7	Round type	90° from port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWA	0.5	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø14.7	Round type	90° from port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWA	0.5	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø14.8	Round type	270° from port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWA	0.5	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø14.8	Round type	270° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWA	0.5	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø14.8	Round type	270° from port	LOW type (40 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWA	0.5	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø15	Round type	270° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø15.8	Round type	Same direction as port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø16	Round type	Same direction as port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø17.7	Round type	Same direction as port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø17.8	Diamond type	Same direction as port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø17.8	Diamond type	90° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø17.8	Diamond type	180° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P4DWSC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø17.8	Round type	Same direction as port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø17.8	Round type	90° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø17.8	Round type	270° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø19.8	Round type	Same direction as port	LOW type (40 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWA	0.5	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø19.8	Round type	270° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø19.9	Diamond type	Same direction as port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø19.9	Round type	90° from port	LOW type (40 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P4DWSE	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.5	Round type	Same direction as port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Diamond type	Same direction as port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Diamond type	Same direction as port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Diamond type	180° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Diamond type	180° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Round type	Same direction as port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Round type	Same direction as port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Round type	Same direction as port	LOW type (40 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Round type	Same direction as port	LOW type (40 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø24.8	Round type	90° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø29.8	Diamond type	180° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	90° from port, 270° from port	Rc	ø29.8	Round type	Same direction as port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø16	Round type	Same direction as port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø16	Round type	180° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø17.5	Diamond type	90° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø17.5	Round type	90° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø17.7	Diamond type	90° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø17.7	Diamond type	90° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø17.7	Diamond type	270° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P4DWSC	0.3	1 pc.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø17.7	Diamond type	270° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø24.8	Round type	90° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø24.8	Round type	90° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø24.8	Round type	90° from port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø24.8	Round type	90° from port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø24.8	Round type	270° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø24.8	Round type	270° from port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø24.8	Round type	270° from port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø24.8	Round type	270° from port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø29.8	Diamond type	180° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø29.8	Diamond type	180° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø29.8	Round type	180° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø29.8	Round type	180° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P3DWASC	0.3	2 pcs.	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	Rc	ø29.8	Round type	270° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	Without auto switch (built-in magnet)	None	None	Built-in standard magnet type	Without lock	Same direction as port, 180° from port	NPT	ø14.8	Round type	90° from port	LOW type (40 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	0.7	0.66	P74	3	2 pcs.	Built-in strong magnet type	Without lock	90° from port, 270° from port	Rc	ø12.5	Round type	Same direction as port	HIGH type (70 mm)	Without shims	-
1 Piece(s)	Quote	50	1	0.66	P74	3	2 pcs.	Built-in strong magnet type	Without lock	90° from port, 270° from port	Rc	ø14.5	Round type	Same direction as port	HIGH type (70 mm)	With 3‑mm shims	-
1 Piece(s)	Quote	50	1	0.66	P74	3	2 pcs.	Built-in strong magnet type	Without lock	90° from port, 270° from port	Rc	ø14.7	Round type	180° from port	HIGH type (70 mm)	Without shims	-

Basic Information

Operation Method	Straight Advancing Stroke	Stroke(mm)	10	Support Type	Tap
Rod Tip Shape	Others	Rod Motion	Double Acting Piece Rod	Body Options	No (Standard)
Operating Temperature Range(°C)	-10::60

Configure

109 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Cylinder Dia.(Ø)
50
Clear
Max. Pressure(MPa)
0.7

1
Clear
Clamping Force(kN)
0.577

0.66
Clear
Auto Switches
P3DWA

P3DWASC

P4DW

P4DWSC

P4DWSE

P74

P79WSE

A93

Without auto switch (built-in magnet)
Clear
Lead Wire Length(m)
- 0.3
- 0.5
- 3
- 5
- None
Clear
The number of the switches
1 (unclamped side)

1 pc.

2

2 pcs.

None
Clear
Specifications
- Built-in standard magnet type
- Built-in strong magnet type
Clear
Clamp Side Lock
- With lock
- Without lock
Clear
Mounting surface position
- 90° from port, 270° from port
- Same direction as port, 180° from port
Clear
Port Screw Type
- G
- NPT
- Rc
Clear
Guide Pin Diameter
- ø12.5
- ø12.8
- ø13
- ø14.5
- ø14.7
- ø14.8
- ø15
- ø15.5
- ø15.7
- ø15.8
- ø15.9
- ø16
- ø17.5
- ø17.7
- ø17.8
- ø19.5
- ø19.7
- ø19.8
- ø19.9
- ø20
- ø24.5
- ø24.7
- ø24.8
- ø25
- ø29.5
- ø29.7
- ø29.8
- ø30
Clear
Guide Pin Shape
- Diamond type
- Round type
Clear
Clamp Arm Position
- 90° from port
- 180° from port
- 270° from port
- Same direction as port
Clear
Clamp Position Height
- LOW type (40 mm)
- HIGH type (70 mm)
Clear
Shim
- With 3‑mm shims
- Without shims
Clear
Connector type
- M12-3/4 pin
- None
Clear
type
- CKQGUA50□
- CKQGUB50□
- CKQPUA50□
- CKQPUB50□
- CLKQGUA50□
- CLKQGUB50□
- CLKQPUA50□
- CLKQPUB50□
Clear
CAD
- 2D
- 3D
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

: Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Pin Clamp Cylinder (Diamond Type, Round Type)

(i)Caution

Model Number Notation

U Series Pin Clamp Cylinder CKQGU/CKQPU/CLKQGU/CLKQPU Series Specifications

Basic Specifications

Lock Specifications

Clamping Force

Weight

CKQGUA50/CKQPUA50 external dimensional drawing

Precautions

Caution on Design

Other precautions

Basic Information

Configure

Specification/Dimensions

Cylinder Dia.(Ø)

Max. Pressure(MPa)

Clamping Force(kN)

Auto Switches

Lead Wire Length(m)

The number of the switches

Specifications

Clamp Side Lock

Mounting surface position

Port Screw Type

Guide Pin Diameter

Guide Pin Shape

Clamp Arm Position

Clamp Position Height

Shim

Connector type

type

CAD

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB