(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Angular Type Air Gripper, Compact Type, MHCM2-7S Series

Angular Type Air Gripper, Compact Type, MHCM2-7S Series

Smallest and most lightweight in the series.

(i)Caution

  • Refer to the catalog for details on product specifications.
  • Product images may be representative. Refer to the manufacturer's catalog for details.

PDF

Angular Type Air Chuck, Compact Type, MHCM2-7S Series Specifications

MHCM2-7S Series JIS symbol (single acting normally open, external gripping)

MHCM2-7S Series JIS symbol (single acting normally open, external gripping)

Applicable fluidsAir
Operating pressure0.4 to 0.6 MPa
Ambient temperature and working fluid temperature-10 to +60°C
Repeat accuracy±0.02 mm
Maximum operating frequency180 c.p.m.
LubricationNon-lube
Operating methodSingle acting (normally open)

Outline dimensional drawing

 

(Unit: mm)

 

MHCM2-7S dimensional drawing

MHCM2-7S dimensional drawing

Structural drawing

Single acting type / open condition structure drawing

Single acting type / open condition structure drawing

Closed condition structure drawing

Closed condition structure drawing

Component parts

NumberPart nameMaterialNote
1BodyAluminum AlloyHard anodizing
2FingerStainless steelHeat treated
3PistonStainless steelHeat treated
4PusherStainless steel-
5SpringPiano wireZinc chromate
6Needle rollerHigh carbon chrome bearing steel-
7Piston GasketNBR-

Effective Gripping Force

Expressing the effective gripping force

The effective gripping force shown in the graphs below is expressed as F, which is the thrust of one finger when both fingers and attachments are in full contact with the workpiece as shown in the figure below.

Finger thrust: F diagram

Finger thrust: F diagram

L: Gripping point length dimensional drawing (external gripping)

L: Gripping point length dimensional drawing (external gripping)

Effective gripping force graph

Effective gripping force graph

*If there is an overhang, please consult with the manufacturer.

Precautions

Mounting

  1. *1Tighten the screw within the specified torque range when mounting the air chuck.
    Tightening with a torque above the limit can cause malfunction, while insufficient tightening can cause slippage and dropping.
  2. *2Do not scratch or dent the air chuck by dropping or bumping it when mounting.
    Even slight deformation can cause the deterioration of accuracy and operation failure.
  3. *3Tighten the screw within the specified torque range when mounting the attachment.
    Tightening with a torque above the limit can cause malfunction, while insufficient tightening can cause slippage and dropping.

Other precautions

  • *Note the risk of corrosion on the finger. Except for certain models, the finger uses martensitic stainless steel, whose corrosion resistance is inferior to austenitic stainless steel. In particular, rust may occur in environments where water droplets adhere to the unit due to condensation.
  • *See the manufacturer's catalog for product information other than the above.
Part Number
MHCM2-7S
Part NumberMinimum order quantityVolume DiscountDays to ShipMade to order specifications
1 Piece(s) 31 Day(s) None

Loading...

  1. 1

Basic Information

Type Main body Gripping Methods Pinch, Swing Type Number of Fingers 2 pcs.
Main Body Shape Square Shape Operation Method Single Acting Type (Normally Open) Gripping Force (when 0.5Mpa at closing)(N) 1.2
Environment, Applications Standard Additional Functions Not Provided Stroke Adjustment Mechanism Not Provided
Cylinder internal diameter(mm) 7

Please check the type/dimensions/specifications of the part MHCM2-7S in the Angular Type Air Gripper, Compact Type, MHCM2-7S Series series.

Products like this...

Part Number
MHCM2-7S-X4
MHCM2-7S-X5
MHCM2-7S-X56
MHCM2-7S-X63
MHCM2-7S-X79
Part NumberMinimum order quantityVolume DiscountDays to ShipMade to order specifications
1 Piece(s) Quote Heat resistance (100°C)
1 Piece(s) Quote Fluoroelastomer seal
1 Piece(s) Quote Axial ported
1 Piece(s) Quote Fluorine grease
1 Piece(s) Quote Grease for food processing machines / fluorine grease

Tech Support