(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Moisture Control Tube, Series IDK

Moisture Control Tube, Series IDK

[Features]
· Prevents condensation in small cylinders and air grippers.
· Draws out internal water vapor.
· No power supply or additional engineering required.
· Just install the Moisture Control Tube into your existing setup and go.

(i)Caution

  • Refer to the catalog for product specifications.
  • Product images may be representative images. Refer to the catalog for details.

PDF

Part Number

Configured Part Number is shown.

Moisture Control Tube IDK Series Specifications

Straight type

IDK Series (Straight Type) external appearance

IDK Series (Straight Type) external appearance

Inner sleeve external appearance

Inner sleeve external appearance

ModelIDK02IDK04IDK06
Fluid*1Compressed air
Maximum operating pressure0.7 MPa
Operating temperature0 to 60°C (no freezing)
Operating environment*2)Indoors where there is no exposure to water, etc. (0 to 40°C, 0 to 75% RH)
Minimum bending radius*3) mm102040
Number of moisture control
tubes
2 pcs
ColorTransparent [Color will turn to brown over time but the functions are not affected. ]
Applicable fittings*4)KQ2
MaterialFluoropolymer

*1: Use the moisture control tube with a refrigerated air dryer and a mist separator installed in the upstream compressed air line. The condensation prevention performance may be lowered depending on the quality of the compressed air (oil, dewpoint) supplied.
*2: Use the product in an operating environment where humidity is low. The condensation prevention performance may be lowered if used under a high-humidity environment.
*3: Minimum bending radius is the value at which the moisture control tube is bent or flattened at 20°C. During actual use, be careful not to bend or flatten, etc., the tube or the inner sleeve.
*4: The inner sleeve is already mounted and cannot be removed. If the inner sleeve comes off, re-insert the sleeve before mounting the fitting.
*5: Do not cut the tube.

Drawings

Straight Type dimensional drawing

Straight Type dimensional drawing

 

(Units: mm)

 

ModelOuter diameter × inner diameter
D
Nominal length
X
Full length
L
IDK02-1002 × 1.2100120
IDK02-200200220
IDK04-1004 × 2.5100140
IDK04-200200240
IDK06-1006 × 4100140
IDK06-200200240

*Dimensions at 40% relative humidity. Dimensions may change if the relative humidity changes.

Coil Shape Type

IDK Series (Coil Shape Type) external appearance

IDK Series (Coil Shape Type) external appearance

ModelIDK04-□-C1IDK06-□-C1
Fluid*1Compressed air
Maximum operating pressure0.7 MPa
Fluid temperature0 to 60°C (no freezing)
Operating environment*2Indoors where product is not exposed to water, etc. (0 to 40°C, 0 to 75% RH)
Number of moisture control tubes2 pcs
ColorTransparent [Color will turn to brown over time,
but the functions are not affected. ]
Applicable fittings*3)KQ2
MaterialFluoropolymer

*1: Use the moisture control tube with a refrigerated air dryer and a mist separator installed in the upstream compressed air line. The condensation prevention performance may be lowered depending on the quality of the compressed air (oil, dewpoint) supplied.
*2: Use the product in an operating environment where humidity is low. The condensation prevention performance may be lowered if used under a high-humidity environment.
*3: The inner sleeve is already mounted and cannot be removed. If the inner sleeve comes off, re-insert the sleeve before mounting the fitting.

Drawing (Per Tube)

 

(Units: mm)

 

IDK04-100-C1 dimensional drawing

IDK04-100-C1 dimensional drawing

 

(Units: mm)

 

IDK04-200-C1 dimensional drawing

IDK04-200-C1 dimensional drawing

 

(Units: mm)

 

Part B details

Part B details

 

(Units: mm)

 

IDK06-100-C1 dimensional drawing

IDK06-100-C1 dimensional drawing

 

(Units: mm)

 

IDK06-200-C1 dimensional drawing

IDK06-200-C1 dimensional drawing

  • *Due to the material, the above dimensions may vary depending on the environment (temperature and humidity), including expansion of Part A.
  • *The images are representative models. The appearance may differ from the actual product.
Part Number
IDK02-100
IDK02-200
IDK04-100
IDK04-200
IDK06-100
IDK06-200
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Dia. D
(Ø)
O.D. [Distinction] Inner Dia. d
(Ø)
I.D. [Distinction] Number of Cables
(Core)
Minimum Bending Radius
(mm)
Operating Temperature
(°C)
Operating Pressure Range (when using air)
(MPa)
Length
(m)
1 Piece(s) 40 Day(s) -~2-~2-10--0.1
1 Piece(s) 40 Day(s) -~2-~2-10--0.2
1 Piece(s) Same day 4~42.5~3-20--0.1
1 Piece(s) 40 Day(s) 4~42.5~3-20--0.2
1 Piece(s) 40 Day(s) 6~64~41400~60null~0.70.1
1 Piece(s) 40 Day(s) 6~64~4-40--0.2

Loading...

  1. 1

Basic Information

Type Straight Cutting Service Usage Presence Material Fluororesin
Applicable Fluid Air Operating Environment Standard Color Transparency
Material, Fluororesin Standard Fluoropolymer

Tech Support