Membrane Air Dryer, Single Unit Type IDG Series

Membrane Air Dryer, Single Unit Type IDG Series

Use of a hollow fiber membrane makes it possible to easily supply dry air.
Non-fluorocarbon, compatible with low dew point (-60°C), no vibration or heat discharge.
[Features]
· Energy saving.
& nbspPurge air flow reduced by up to 39 L/min (ANR).
· Space saving.
& Flexible mounting orientation, IDG1 Series is easy to install in narrow spaces.
· High performance.
& Time to reach standard dew point reduced by 40 minutes.

(i)Caution

  • See catalog for specification details.
  • Product images may be representative images. Refer to the catalog for details.

PDF

Part Number

Configured Part Number is shown.

Part Number
IDG10-02
IDG10-02B
IDG10-02B-P
IDG10-02B-R
IDG10-03
IDG10-03-P
IDG10-03B
IDG10-03B-P
IDG10-F02
IDG10-F03
IDG10-F03-R
IDG10-N02
IDG10-N03
IDG10-N03B-R
IDG10H-02
IDG10H-02B
IDG10H-03
IDG10H-03-P
IDG10H-03B
IDG10H-03B-P
IDG10H-F02
IDG10H-F02B
IDG10H-F03
IDG10H-N02
Part NumberVolume DiscountDays to ShipShape Air Inlet Flow
(l/min)
Air Inlet Flow Rate [Distinction]
(l/min)
Outlet Open Air Pressure Dew-point
(℃)
Supply Side, Connection Type Body Material Supply Side, Plumbing Thread Nominal Control Side, Connection Type Control Side, Plumbing Thread Nominal Standard size Accessory Fitting for purge air emission Flow Direction Dew Point Checker
20 Day(s) Standard100~100-20[Rc(R)] RcMetal1/4[Rc(R)] Rc1/410NoneNoneNoneNone
20 Day(s) Standard100~100-20[Rc(R)] RcMetal1/4[Rc(R)] Rc1/410With BracketNoneNoneNone
20 Day(s) Standard100~100-20[Rc(R)] RcMetal1/4[Rc(R)] Rc1/410With BracketWith fitting for purge air dischargeNoneNone
20 Day(s) Standard100~100-20[Rc(R)] RcMetal1/4[Rc(R)] Rc1/410With BracketNoneRight > LeftNone
20 Day(s) Standard100~100-20[Rc(R)] RcMetal3/8[Rc(R)] Rc3/810NoneNoneNoneNone
20 Day(s) Standard100~100-20[Rc(R)] RcMetal3/8[Rc(R)] Rc3/810NoneWith fitting for purge air dischargeNoneNone
3 Day(s) Standard100~100-20[Rc(R)] RcMetal3/8[Rc(R)] Rc3/810With BracketNoneNoneNone
20 Day(s) Standard100~100-20[Rc(R)] RcMetal3/8[Rc(R)] Rc3/810With BracketWith fitting for purge air dischargeNoneNone
20 Day(s) Standard100~100-20GMetal1/4G1/410NoneNoneNoneNone
20 Day(s) Standard100~100-20GMetal3/8G3/810NoneNoneNoneNone
20 Day(s) Standard100~100-20GMetal3/8G3/810NoneNoneRight > LeftNone
20 Day(s) Standard100~100-20NPTMetal1/4NPT1/410NoneNoneNoneNone
20 Day(s) Standard100~100-20NPTMetal3/8NPT3/810NoneNoneNoneNone
20 Day(s) Standard100~100-20NPTMetal3/8NPT3/810With BracketNoneRight > LeftNone
20 Day(s) Standard100~100-15[Rc(R)] RcMetal1/4[Rc(R)] Rc1/410NoneNoneNoneNone
20 Day(s) Standard100~100-15[Rc(R)] RcMetal1/4[Rc(R)] Rc1/410With BracketNoneNoneNone
20 Day(s) Standard100~100-15[Rc(R)] RcMetal3/8[Rc(R)] Rc3/810NoneNoneNoneNone
20 Day(s) Standard100~100-15[Rc(R)] RcMetal3/8[Rc(R)] Rc3/810NoneWith fitting for purge air dischargeNoneNone
20 Day(s) Standard100~100-15[Rc(R)] RcMetal3/8[Rc(R)] Rc3/810With BracketNoneNoneNone
20 Day(s) Standard100~100-15[Rc(R)] RcMetal3/8[Rc(R)] Rc3/810With BracketWith fitting for purge air dischargeNoneNone
20 Day(s) Standard100~100-15GMetal1/4G1/410NoneNoneNoneNone
20 Day(s) Standard100~100-15GMetal1/4G1/410With BracketNoneNoneNone
20 Day(s) Standard100~100-15GMetal3/8G3/810NoneNoneNoneNone
20 Day(s) Standard100~100-15NPTMetal1/4NPT1/410NoneNoneNoneNone

Loading...

  1. 1

Basic Information

Type Dryer Method Hollow Fiber Type Inlet Air Temperature(℃) 25
Inlet Air Pressure(MPa) 0.7

Additional Products in this Category

Tech Support