(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Linear drive, DFM Series (Part Numbers)
Linear drive, DFM Series
Features
Specifications
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pneumatic connection | M3 | M3 | M5 | M5 | M5 | G1/8 | G1/8 | G1/8 | G1/4 | G1/4 | G3/8 | G3/8 | |
| Design | Piston | ||||||||||||
| Piston rod | |||||||||||||
| Guide rods with yoke | |||||||||||||
| Cushioning | Elastic cushioning rings/plates at both ends | ||||||||||||
| Position sensing | Via proximity switch | ||||||||||||
| Type of mounting | With through-hole | ||||||||||||
| With female thread | |||||||||||||
| Mounting position | Any | ||||||||||||
| Protection against torsion/guide | Guide rod with yoke/with plain-bearing or ball bearing guide | ||||||||||||
| - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating and environmental conditions | - | - | - | - | - | - | - | - | - | - | - | - | - |
| - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Operating pressure [bar] | 2 to 8 | 1.5 to 8 | 2 to 10 | 1.5 to 10 | 1 to 10 | 0.5 to 10 | |||||||
| Operating medium | Compressed air to ISO 85731:2010 [7:4:4] | ||||||||||||
| Note on operating/ pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||||||||||||
| Ambient temperature [℃] | DFM-...-GF | -10 to +60 | -20 to +80 | ||||||||||
| DFM-...-KF | - | -5 to +60 | |||||||||||
| Corrosion resistance CRC | 1 | ||||||||||||
Speeds [m/s]
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cushioning P | ||||||||||||
| Maximum speed, advancing | 1.3 | 1.7 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.6 | 0.6 | 0.4 | 0.4 |
| Maximum speed, retracting | 1.1 | 1.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.6 | 0.6 | 0.4 | 0.4 |
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Stroke (mm) | Pneumatic connection | Piston diameter (mm) | Guide | Max. speed (m/s) | Impact energy in the end positions (J) | Max. force Fy (N) | Max. force Fz (N) | Max. torque Mx (Nm) | Max. torque My (Nm) | Max. torque Mz (Nm) | Theoretical force at 6 bar, retracting (N) | Theoretical force at 6 bar, advancing (N) | Moving mass (g) | Housing material | Cover material | Seals material | Min. Operating pressure (bar) | Max. Operating pressure (bar) | Min. Ambient temperature (°C) | Max. Ambient temperature (°C) | Distance of centre of gravity of payload to yoke plate xs (mm) | Max. static moment Mx (Nm) | Max. static moment My (Nm) | Max. permissible torque load Mx as a function of the stroke (Nm) | Max. force Fz static (N) | Max. force Fy static (N) | Center of gravity of the moving mass as a function of the stroke (mm) | Max. static moment Mz (Nm) | Max. payload as a function of the stroke at defined distance xs (N) | Operating medium | Corrosion resistance class (CRC) | Stroke (mm) | Manufacturer part # | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | 15 Day(s) | 100 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 1743 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1.5 | 10 | -20 | 80 | 50 | - | - | 6.5 | - | - | - | - | 150 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170867 | 3595 | ||
| 1 Piece(s) | Quote | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 100 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 28.83 | 28.83 | 686 | 754 | 1433 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 32.13 | 7.74 | 1260 | 1260 | 62.1 | 32.13 | 138 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170942 | 3265 | ||
| 1 Piece(s) | Quote | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 125 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 1983 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1.5 | 10 | -20 | 80 | 50 | - | - | 7.3 | - | - | - | - | 168 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170868 | 4123 | ||
| 1 Piece(s) | Quote | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 125 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 40.13 | 40.13 | 686 | 754 | 1597 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 44.73 | 8.64 | 1260 | 1260 | 79 | 44.73 | 161 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170943 | 3717 | ||
| 1 Piece(s) | Quote | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 160 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 2183 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1.5 | 10 | -20 | 80 | 50 | - | - | 6.4 | - | - | - | - | 146 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170869 | 4736 | ||
| 1 Piece(s) | Quote | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 160 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 40.13 | 40.13 | 686 | 754 | 1738 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 44.73 | 7.49 | 1260 | 1260 | 94.4 | 44.73 | 143 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170944 | 4271 | ||
| 1 Piece(s) | Quote | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 200 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 2411 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1.5 | 10 | -20 | 80 | 50 | - | - | 5.5 | - | - | - | - | 127 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170870 | 5437 | ||
| 1 Piece(s) | Quote | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 200 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 40.13 | 40.13 | 686 | 754 | 1899 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 44.73 | 6.5 | 1260 | 1260 | 112.3 | 44.73 | 127 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170945 | 4905 | ||
| 1 Piece(s) | Quote | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 25 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 2026 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 14.1 | - | - | - | - | 257 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170871 | 3440 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 25 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 31.98 | 31.98 | 1057 | 1178 | 1796 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 88 | 34.4 | 19.35 | 1600 | 1600 | 30.6 | 34.4 | 235 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170946 | 3212 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 | - | - | ||
| 1 Piece(s) | 4 Day(s) | 50 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 2254 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 11.8 | - | - | - | - | 216 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170872 | 4085 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 50 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 31.98 | 31.98 | 1057 | 1178 | 1969 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 88 | 34.4 | 15.51 | 1600 | 1600 | 39.5 | 34.4 | 202 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170947 | 3801 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 80 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 2687 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 12.8 | - | - | - | - | 234 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170873 | 5013 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 80 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 80 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 47.58 | 47.58 | 1057 | 1178 | 2287 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 88 | 51.2 | 16.43 | 1600 | 1600 | 57.4 | 51.2 | 233 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170948 | 4614 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 80 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 100 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 2870 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 11.6 | - | - | - | - | 212 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170874 | 5511 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 100 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 47.58 | 47.58 | 1057 | 1178 | 2425 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 88 | 51.2 | 14.76 | 1600 | 1600 | 65.6 | 51.2 | 214 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170949 | 5068 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 125 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 3249 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 12.5 | - | - | - | - | 229 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170875 | 6302 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 125 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 62.46 | 62.46 | 1057 | 1178 | 2703 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 88 | 67.2 | 15.77 | 1600 | 1600 | 82.8 | 67.2 | 238 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170950 | 5758 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 160 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 3569 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 11 | - | - | - | - | 200 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170876 | 7205 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 160 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 62.46 | 62.46 | 1057 | 1178 | 2945 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 88 | 67.2 | 13.78 | 1600 | 1600 | 98.1 | 67.2 | 212 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170951 | 6583 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 200 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 3935 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 9.6 | - | - | - | - | 174 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170877 | 8238 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 200 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 62.46 | 62.46 | 1057 | 1178 | 3221 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 88 | 67.2 | 12.04 | 1600 | 1600 | 115.9 | 67.2 | 189 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170952 | 7525 | ||
| 1 Piece(s) | Quote | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 25 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 2471 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 15.9 | - | - | - | - | 257 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170878 | 4470 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 25 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 31.98 | 31.98 | 1750 | 1870 | 2241 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 100 | 34.4 | 21.98 | 1600 | 1600 | 27.8 | 34.4 | 235 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170953 | 4242 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 50 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 2699 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 13.3 | - | - | - | - | 216 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170879 | 5243 | ||
| 1 Piece(s) | Quote | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
| 1 Piece(s) | 15 Day(s) | 50 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 31.98 | 31.98 | 1750 | 1870 | 2413 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 100 | 34.4 | 17.62 | 1600 | 1600 | 35.8 | 34.4 | 202 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170954 | 4959 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 80 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 3130 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 14.4 | - | - | - | - | 234 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170880 | 6287 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 80 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 80 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 47.58 | 47.58 | 1750 | 1870 | 2731 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 100 | 51.2 | 18.67 | 1600 | 1600 | 51.9 | 51.2 | 233 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170955 | 5888 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 80 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 100 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 3313 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 13.1 | - | - | - | - | 212 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170881 | 6904 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 100 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 47.58 | 47.58 | 1750 | 1870 | 2868 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 100 | 51.2 | 16.77 | 1600 | 1600 | 59.4 | 51.2 | 214 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170956 | 6461 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 125 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 3692 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 14.1 | - | - | - | - | 229 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170882 | 7824 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 125 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 62.46 | 62.46 | 1750 | 1870 | 3146 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 100 | 67.2 | 17.92 | 1600 | 1600 | 75.2 | 67.2 | 238 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170957 | 7279 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 160 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 4010 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 12.3 | - | - | - | - | 200 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170883 | 8906 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 160 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 62.46 | 62.46 | 1750 | 1870 | 3386 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 100 | 67.2 | 15.66 | 1600 | 1600 | 89.6 | 67.2 | 212 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170958 | 8283 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 200 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 4375 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -20 | 80 | 50 | - | - | 10.7 | - | - | - | - | 174 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170884 | 10142 | ||
| 1 Piece(s) | Quote | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | ||
| 1 Piece(s) | 15 Day(s) | 200 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 62.46 | 62.46 | 1750 | 1870 | 3660 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 1 | 10 | -5 | 60 | 50 | 100 | 67.2 | 13.68 | 1600 | 1600 | 106.5 | 67.2 | 189 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170959 | 9429 | ||
| 1 Piece(s) | Quote | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
| 1 Piece(s) | 25 Day(s) | 25 | G3/8 | 80 | Sliding guide | 0.4 | 0.75 | - | - | - | - | - | 2827 | 3016 | 4141 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | - | - | 125 | - | - | 21.4 | - | - | - | - | 276 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | - | - | ||
| 1 Piece(s) | 25 Day(s) | 25 | G3/8 | 80 | Recirculating ball bearing guide | 0.4 | 0.75 | 2048 N | 2048 N | 158.67 | 48.12 | 48.12 | 2827 N | 3016 N | 3673 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | -5 | 60 | 125 | 241.8 | 73.32 | 17.1 | 3120 | 3120 | 33.9 | 73.32 | 220 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170960 | 6506 | ||
| 1 Piece(s) | 25 Day(s) | 50 | G3/8 | 80 | Sliding guide | 0.4 | 0.75 | - | - | - | - | - | 2827 N | 3016 N | 4717 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | -20 | 80 | 125 | - | - | 24.2 | - | - | - | - | 311 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170886 | 8185 | ||
| 1 Piece(s) | 20 Day(s) | - | - | 80 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 80 | - | - | ||
| 1 Piece(s) | 20 Day(s) | - | - | 80 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
| 1 Piece(s) | 25 Day(s) | 125 | G3/8 | 80 | Sliding guide | 0.4 | 0.75 | - | - | - | - | - | 2827 N | 3016 N | 6076 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | -20 | 80 | 125 | - | - | 23.5 | - | - | - | - | 304 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170889 | 11490 | ||
| 1 Piece(s) | 25 Day(s) | 160 | G3/8 | 80 | Sliding guide | 0.4 | 0.75 | - | - | - | - | - | 2827 N | 3016 N | 6553 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | -20 | 80 | 125 | - | - | 21.3 | - | - | - | - | 274 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170890 | 12910 | ||
| 1 Piece(s) | 25 Day(s) | 160 | G3/8 | 80 | Recirculating ball bearing guide | 0.4 | 0.75 | 2048 N | 2048 N | 158.67 | 100.35 | 100.35 | 2827 N | 3016 N | 5451 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | -5 | 60 | 125 | 241.8 | 152.9 | 22.6 | 3120 | 3120 | 98.4 | 152.9 | 291 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170965 | 11750 | ||
| 1 Piece(s) | 20 Day(s) | - | - | 80 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | ||
| 1 Piece(s) | 25 Day(s) | 200 | G3/8 | 80 | Recirculating ball bearing guide | 0.4 | 0.75 | 2048 N | 2048 N | 158.67 | 100.35 | 100.35 | 2827 N | 3016 N | 5861 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | -5 | 60 | 125 | 241.8 | 152.9 | 21.5 | 3120 | 3120 | 115.2 | 152.9 | 277 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170966 | 13214 | ||
| 1 Piece(s) | 20 Day(s) | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 | - | - | ||
| 1 Piece(s) | 25 Day(s) | 25 | G3/8 | 100 | Recirculating ball bearing guide | 0.4 | 1 | 3043 N | 3043 N | 286.02 | 76.06 | 76.06 | 4418 N | 4712 N | 5696 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | -5 | 60 | 125 | 507.6 | 135 | 25.7 | 5400 | 5400 | 35 | 135 | 332 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170967 | 10520 | ||
| 1 Piece(s) | 25 Day(s) | 50 | G3/8 | 100 | Sliding guide | 0.4 | 1 | - | - | - | - | - | 4418 N | 4712 N | 7113 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 0.5 | 10 | -20 | 80 | 125 | - | - | 47.8 | - | - | - | - | 509 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170893 | 12589 | ||
| 1 Piece(s) | 20 Day(s) | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 80 | - | - | ||
| 1 Piece(s) | 20 Day(s) | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
| 1 Piece(s) | 20 Day(s) | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | ||
| 1 Piece(s) | 20 Day(s) | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | ||
| 1 Piece(s) | 20 Day(s) | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - |
Loading...
Basic Information
| Piston rod material | High-alloy stainless steel |
|---|
Specification/Dimensions
-
Stroke(mm)
-
Piston diameter(mm)
-
Guide
- Recirculating ball bearing guide
- Sliding guide
-
Max. speed(m/s)
- 0.4
- 0.6
- 0.8
- 1.3
- 1.7
-
Impact energy in the end positions(J)
-
Max. force Fy(N)
-
Max. force Fz(N)
-
Max. torque Mx(Nm)
-
Max. torque My(Nm)
-
Max. torque Mz(Nm)
-
Theoretical force at 6 bar, retracting(N)
-
Theoretical force at 6 bar, advancing(N)
-
Moving mass(g)
- 8
- 9
- 10
- 11.5
- 13
- 18.5
- 21
- 155
- 165
- 170
- 172
- 175
- 186
- 193
- 196
- 200
- 206
- 212
- 221
- 229
- 232
- 237
- 241
- 242
- 246
- 249
- 253
- 257
- 264
- 289
- 294
- 310
- 318
- 343
- 359
- 364
- 376
- 385
- 388
- 392
- 400
- 415
- 428
- 471
- 488
- 512
- 552
- 582
- 584
- 595
- 611
- 626
- 632
- 650
- 669
- 672
- 680
- 687
- 711
- 732
- 755
- 793
- 802
- 863
- 875
- 895
- 904
- 915
- 955
- 979
- 996
- 1020
- 1049
- 1074
- 1077
- 1134
- 1173
- 1175
- 1191
- 1228
- 1254
- 1352
- 1371
- 1418
- 1433
- 1450
- 1559
- 1564
- 1597
- 1629
- 1720
- 1738
- 1743
- 1796
- 1803
- 1899
- 1969
- 1983
- 2003
- 2026
- 2183
- 2232
- 2241
- 2254
- 2287
- 2411
- 2413
- 2425
- 2471
- 2687
- 2699
- 2703
- 2731
- 2868
- 2870
- 2945
- 3130
- 3146
- 3221
- 3249
- 3313
- 3386
- 3569
- 3660
- 3673
- 3692
- 3935
- 4010
- 4141
- 4375
- 4717
- 5451
- 5696
- 5861
- 6076
- 6553
- 7113
-
Housing material
- Anodised wrought aluminium alloy
- Wrought aluminum alloy
- Wrought aluminum alloy, anodized
-
Cover material
- High-alloy stainless steel
- Wrought aluminum alloy
-
Seals material
- NBR
-
Min. Operating pressure(bar)
- 0.5
- 1
- 1.5
- 2
-
Max. Operating pressure(bar)
- 8
- 10
-
Min. Ambient temperature(°C)
- -20
- -5
-
Max. Ambient temperature(°C)
- 60
- 80
-
Distance of centre of gravity of payload to yoke plate xs(mm)
- 10
- 25
- 50
- 125
-
Max. static moment Mx(Nm)
-
Max. static moment My(Nm)
-
Max. permissible torque load Mx as a function of the stroke(Nm)
- 0.006
- 0.007
- 0.008
- 0.011
- 0.034
- 0.039
- 0.046
- 0.057
- 0.4
- 0.45
- 0.48
- 0.5
- 0.56
- 0.6
- 0.61
- 0.65
- 0.66
- 0.72
- 0.73
- 0.81
- 0.88
- 1.14
- 1.18
- 1.23
- 1.28
- 1.3
- 1.44
- 1.52
- 1.56
- 1.64
- 1.68
- 1.7
- 1.75
- 1.77
- 1.79
- 1.85
- 2.03
- 2.08
- 2.1
- 2.19
- 2.24
- 2.35
- 2.43
- 2.63
- 2.8
- 2.9
- 2.92
- 2.95
- 3
- 3.2
- 3.36
- 3.8
- 3.81
- 3.9
- 4.1
- 4.2
- 4.23
- 4.33
- 4.64
- 5
- 5.43
- 5.5
- 5.7
- 5.76
- 5.77
- 5.8
- 5.94
- 6.14
- 6.2
- 6.4
- 6.5
- 6.64
- 6.7
- 6.86
- 7
- 7.09
- 7.2
- 7.3
- 7.49
- 7.66
- 7.71
- 7.74
- 7.77
- 7.9
- 8
- 8.6
- 8.64
- 8.7
- 9.08
- 9.6
- 9.62
- 10.25
- 10.7
- 11
- 11.6
- 11.8
- 12.04
- 12.3
- 12.5
- 12.8
- 13.1
- 13.3
- 13.68
- 13.78
- 14.1
- 14.4
- 14.76
- 15.51
- 15.66
- 15.77
- 15.9
- 16.43
- 16.77
- 17.1
- 17.62
- 17.92
- 18.67
- 19.35
- 21.3
- 21.4
- 21.5
- 21.98
- 22.6
- 23.5
- 24.2
- 25.7
- 47.8
-
Max. force Fz static(N)
-
Max. force Fy static(N)
-
Center of gravity of the moving mass as a function of the stroke(mm)
-
Max. static moment Mz(Nm)
-
Max. payload as a function of the stroke at defined distance xs(N)
- 0.5
- 0.65
- 0.85
- 1.1
- 2
- 2.4
- 3
- 3.7
- 19
- 20
- 21
- 22
- 23
- 24
- 28
- 31
- 37
- 39
- 41
- 42
- 44
- 45
- 46
- 49
- 51
- 53
- 55
- 56
- 58
- 61
- 63
- 64
- 67
- 73
- 77
- 78
- 82
- 86
- 95
- 96
- 102
- 103
- 105
- 108
- 110
- 112
- 115
- 116
- 119
- 121
- 123
- 126
- 127
- 135
- 138
- 143
- 144
- 146
- 149
- 150
- 151
- 155
- 161
- 166
- 168
- 173
- 174
- 180
- 188
- 189
- 200
- 202
- 212
- 214
- 216
- 220
- 229
- 233
- 234
- 235
- 238
- 257
- 274
- 276
- 277
- 291
- 304
- 311
- 332
- 509
-
Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
-
Corrosion resistance class (CRC)
- 0 - No corrosion stress
- 1 - Low corrosion stress
-
Stroke(mm)
Days to Ship
-
- All
- 4 Day(s) or Less
- 15 Day(s) or Less
- 20 Day(s) or Less
- 25 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy