(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Contact Crimp Tool For HIF3B Series

Precautions For Using the Manual Crimp Tool

External appearance *The actual product may differ from that shown in the image.

External appearance *The actual product may differ from that shown in the image.

Fig. 1 (If the handle remains closed and cannot be opened, insert a screwdriver or similar into the handle.)

Fig. 1 (If the handle remains closed and cannot be opened, insert a screwdriver or similar into the handle.)

Precautions

  • 1. Manual crimp tools cannot make fine adjustments of crimp height, so if the electrical wire you use is different from the specified wire, even if it is compatible with the contact, it may not be compatible with the tools.
  • 2. Do not crimp other than the compatible contact or cable.
  • 3. Do not subject the tool to physical impact or drop.
  • 4. Do not attempt to release the movable handle before completing full compression as this may damage the tool. Handle will release after completion of the full compression. The handle cannot be opened before automatic release of the ratchet.
  • 5. Do not apply excessive compression on the handles after full compression. Occasionally the movable handle may remain closed after the full compression. Insert a screwdriver (or similar tool) as shown in Fig. 1 to release it. Applying excessive compression can lead to play in the hand tool. With hand tools with play, normal compression cannot be obtained.
  • 6. Assure that the crimped condition of the the crimped terminal is within specification when you start working.

Maintenance and Inspection

Routine maintenance

  • 1. Upon completion of work, wipe the tool with a soft cloth to remove any stains or foreign particles, close the handle to ensure no foreign particles enter the crimper and anvil areas, and store in a dry area.
  • 2. When opening/closing the handle, make sure that the anvil slides smoothly without any interference.

Routine maintenance
Maintenance is performed to evaluate if the condition and performance of the tool is appropriate.
Tool Repair
If there is a tool defect and it requires repairs, do not disassemble the tool. Contact us describing the exact nature of the problem. Please be aware in advance that depending on its condition, in some cases the tool may NOT be repairable.

Compatible Contacts / Wire

Loose contact

(Units: mm)

Compatible crimped contactManual crimping toolsCompatible cable
Style No.AWGStructure of Core WireCoating Outer Diameter
HIF3-2022SCHIF3-TA2022HCUL1007 Stranded Wire2021 wires/0.18ø1.8
2217 wires/0.16ø1.6
HIF3-2226SC
HIF3-2226SCA
HIF3-T2226HCUL1007 Stranded Wire
2411 wires/0.16ø1.5
267 wires/0.16ø1.3
HIF3-2428SC
HIF3-2428SCA
HIF3-TA2428HCUL1007 Stranded Wire2411 wires/0.16ø1.5
267 wires/0.16ø1.3
287 wires/0.127ø1.2

VA Type Loose Contacts

(Units: mm)

Compatible crimped contactManual crimping toolsCompatible cable
Style No.AWGStructure of Core WireCoating Outer Diameter
HIF3-2226SCCHIF3-TB2226HCUL1007 Stranded Wire2217 wires/0.16ø1.6
2411 wires/0.16ø1.5
267 wires/0.16ø1.3
HIF3-2630SCCHIF3-TB2630HCUL1007 Stranded Wire26
287 wires/0.127ø1.2
307 wires/0.1ø1.1
Part Number
HIF3-T2226HC
HIF3-TA2022HC
HIF3-TA2428HC
HIF3-TB2226HC
Part NumberMinimum order quantityVolume DiscountDays to ShipCompatible Model Conforming Wire Coating Outer Diameter
(φ)
Calculated cross-sectional area
(mm2)
1 Piece(s) 12 Day(s) or more HIF3-2226SC / HIF3-2226SCAAWG 26 to 221.6 to 1.30.12–0.32
1 Piece(s) 12 Day(s) or more HIF3-2022SCAWG 22 to 201.8 to 1.60.534 to 0.342
1 Piece(s) 12 Day(s) or more HIF3-2428SC / HIF3-2428SCAAWG 28 to 241.5–1.20.221 to 0.089
1 Piece(s) 12 Day(s) or more HIF3-2226SCCAWG 26 to 221.6 to 1.30.342 to 0.141

Loading...

  1. 1

Basic Information

Applicable Type MIL Standard-Compliant Product Applicable Series HIF3B series Application Manual Crimping Tools
Application Manual Crimping Tool Applicable Series HIF3B series

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)