(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
D-Sub Series, Accessory
- Volume Discount
This is a D sub series accessory.
[Features]
■Straight clamp plastic split type D * -C1 (C2)-J * model
• After making the connection, fix by turning both lock-side screws to join partnering sides with the latch fixing block.
• There are 3 types of match retention screws: M2.6, M3, and #4-40.
■Straight clamp plastic split type D * -C8-J * -B model
• The match retaining screws and corresponding connectors contain both short-type screws for use with a screw driver (flat or Phillips) as well as long-type screws for tightening by hand. Screws include both millimeter and inch measurement specifications.
• Split-type junction shell.
• D*-C1, D*-C2, D*-C8-junction shell (clamp hood) types include two-piece construction for easy access after wiring.
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Type | Material | Specification | Color | Features | Product Category | Type | Features | Color | Material | EMI Measure | Finishing | Conforming shell size | Conforming product | Mating stand shape | Special Notes | Note | Operating Temperature Range (°C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | - | Spring lock device | Spring | - | - | Stainless Steel | Non-Compatible | - | E, A, B, C | - | - | It cannot be used if the contact mounting is rare mounting | - | - | ||
| 2 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | - | Spring lock device | Plate | - | - | Stainless Steel | Non-Compatible | - | E, A, B, C | - | - | It cannot be used if the contact mounting is rare mounting | - | - | ||
| 5 Piece(s) | 9 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Mating fixed base | For front/rear mounting of lock nuts (female side) | #4-40 inch screws | - | Steel | Corresponds To | Nickel Plating | - | - | Hexagonal shape (short) | Cannot be used for cable for relay | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Mating fixed base | For front/rear mounting of lock nuts (female side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | - | Hexagonal shape (short) | Cannot be used for cable for relay | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Mating fixed base | For front/rear mounting of lock nuts (female side) | M2.6 millimeter screw | - | Steel | Corresponds To | Nickel Plating | - | - | Hexagonal shape (short) | Cannot be used for cable for relay | - | - | ||
| 3 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Mating fixed base | For front/rear mounting of lock nuts (female side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | - | Hexagonal shape (short) | Cannot be used for cable for relay | - | - | ||
| 1 Piece(s) | Available | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.5 Metric Thread | Mating fixed base | For front mounting of lock nuts (female side) | M2.5 millimeter screw | - | Steel | Corresponds To | Nickel Plating | - | - | Hexagonal shape (long) | Cannot be used for cable for relay | - | - | |
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M3 Metric Thread | Mating fixed base | For front mounting of lock nuts (female side) | M3 millimeter screw | - | Zinc Alloy | Corresponds To | Nickel Plating | - | - | Rectangle | When using for cable relay, the attached round head small screws are not used | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | - | Connector Fastener | Metal | - | Silver | M3 Metric Thread | Mating fixed base | For front mounting of lock nuts (female side) | M3 millimeter screw | - | Zinc Alloy | Non-Compatible | Trivalent chromate on zinc plating | - | - | Rectangle | When using for cable relay, the attached round head small screws are not used | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Mating fixed base | For front mounting of lock nuts (female side) | M2.6 millimeter screw | - | Zinc Alloy | Corresponds To | Nickel Plating | - | - | Rectangle | When using for cable relay, the attached round head small screws are not used | - | - | ||
| 6 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Mating fixed base | For front mounting of lock nuts (female side) | #4-40 inch screws | - | Zinc Alloy | Corresponds To | Nickel Plating | - | - | Rectangle | When using for cable relay, the attached round head small screws are not used | - | - | ||
| 1 Piece(s) | Available | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Mating fixed base | For front mounting of lock nuts (female side) | #4-40 inch screws | - | Zinc Alloy | Non-Compatible | Trivalent chromate on zinc plating | - | - | Rectangle | When using for cable relay, the attached round head small screws are not used | - | - | |
| 1 Piece(s) | Available | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M3 Metric Thread | Mating fixed base | For front/rear mounting of lock nuts (female side) | M3 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | - | Hexagonal shape (short) | Cannot be used for cable for relay | - | - | |
| 7 Piece(s) | 16 Day(s) or more | 10 | Hood | Metal | - | Silver | M2.6 Metric Thread | Mating fixed base | For front mounting of lock nuts (female side) | M2.6 millimeter screw | - | Steel | Corresponds To | Nickel Plating | - | - | Hexagonal shape (long) | Cannot be used for cable for relay | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Mating fixed base | For front mounting of lock nuts (female side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | - | Hexagonal shape (long) | Cannot be used for cable for relay | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Metal | - | Silver | M2.6 Metric Thread | Screw locking device | Locking screw (male side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-J3R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly when attaching the junction shell to the [DE, DA (pin or socket)/DB, DC (socket)] (metal) | - | ||
| 3 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Screw locking device | Locking screw (male side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-2R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly when attaching the junction shell to the [DE, DA (pin or socket)/DB, DC (socket)] (metal) | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Screw locking device | Locking screw (male side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-J3R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | Applicable shell size and assembly is [DB, DC (pin)] | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Screw locking device | Locking screw (male side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-2R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | Applicable shell size and assembly is [DB, DC (pin)] | - | ||
| 3 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Screw locking device | Locking screw (male side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-J3R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly when attaching the junction shell to the [DB, DC (pin)] (metal) | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Screw locking device | Locking screw (male side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-2R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly when attaching the junction shell to the [DB, DC (pin)] (metal) | - | ||
| 4 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Screw locking device | Locking screw (male side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-J3R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly is [DE, DA (pin or socket)/DB, DC (socket)] | - | ||
| 5 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Screw locking device | Locking screw (male side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-2R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly is [DE, DA (pin or socket)/DB, DC (socket)] | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Screw locking device | Locking screw (male side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-J3R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly when attaching the junction shell to the [DD (socket)] (metal) | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Screw locking device | Locking screw (male side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-2R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly when attaching the junction shell to the [DD (socket)] (metal) | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Screw locking device | Locking screw (male side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-J3R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | Applicable shell size and assembly is [DD (pin)] | - | ||
| 1 Piece(s) | 16 Day(s) or more | - | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Screw locking device | Locking screw (male side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-2R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | Applicable shell size and assembly is [DD (pin)] | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Screw locking device | Locking screw (male side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-J3R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly when attaching the junction shell to the [DD (pin)] (metal) | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | #4 to 40 Imperial Thread | Screw locking device | Locking screw (male side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-2R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | The applicable shell size and assembly when attaching the junction shell to the [DD (pin)] (metal) | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | M2.6 Metric Thread | Screw locking device | Locking screw (male side) | M2.6 millimeter screw | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-J3R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | Applicable shell size and assembly is [DD (socket)] | - | ||
| 1 Piece(s) | 16 Day(s) or more | - | Hood | Metal | - | Silver | #4 to 40 Imperial Thread | Screw locking device | Locking screw (male side) | #4-40 inch screws | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | - | D20418-2R | - | Specify both the male side and female side when ordering. For 1 connector set, 2 male sides and 2 female sides are required. | Applicable shell size and assembly is [DD (socket)] | - | ||
| 3 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | - | Sliding lock device | Post | - | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | All sizes | - | - | If the connector is rear mounting, washers should be combined to match the panel thickness | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Metal | Direct Type Hood | Silver | - | Junction shell | Metal round clamp | - | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Metal | Direct Type Hood | Silver | - | Junction shell | Metal rectangle clamp | - | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Connector Fastener | Metal | - | Silver | - | Sliding lock device | Retainer plate | - | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | A | - | - | If the connector is rear mounting, washers should be combined to match the panel thickness | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Light Gray | M3 Metric Thread | Junction shell | Plastic divided type/straight clamp | M3 millimeter screw | Light gray | Synthetic Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Light Gray | #4 to 40 Imperial Thread | Junction shell | Plastic divided type/straight clamp | #4-40 inch screws | Light gray | Synthetic Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 2 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Light Gray | M2.6 Metric Thread | Junction shell | Plastic divided type/straight clamp | M2.6 millimeter screw | Light gray | Synthetic Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Black | Without Thread | Junction shell | Plastic/straight clamp | Without Screw | Black | ABS Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Aluminum Alloy | Direct Type Hood | Silver | Short Screw / M2.6 Metric Thread | Junction shell | Metal Hood | Short screw/M2.6 mm screw | - | Aluminum Die Casting | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Aluminum Alloy | Direct Type Hood | Silver | Long Screw / M2.6 Metric Thread | Junction shell | Metal Hood | Long screw/M2.6 metric screws | - | Aluminum Die Casting | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Aluminum Alloy | Direct Type Hood | Silver | Long Screw / #4 to 40 Imperial Thread | Junction shell | Metal Hood | Long screw/#4-40 inch screws | - | Aluminum Die Casting | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Aluminum Alloy | Direct Type Hood | Silver | Short Screw / #4 to 40 Imperial Thread | Junction shell | Metal Hood | Short screw/#4-40 inch screw | - | Aluminum Die Casting | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Black | Short Screw / M2.6 Metric Thread | Junction shell | Plastic divided type/straight clamp | Short screw/M2.6 mm screw | Black | ABS Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Black | Short Screw / #4 to 40 Imperial Thread | Junction shell | Plastic divided type/straight clamp | Short screw/#4-40 inch screw | Black | ABS Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | - | Hood | Plastic | Direct Type Hood | Black | Short Screw / M3 Metric Thread | Junction shell | Plastic divided type/straight clamp | Short screw/M3 mm screw | Black | ABS Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Black | Long Screw / M2.6 Metric Thread | Junction shell | Plastic divided type/straight clamp | Long screw/M2.6 metric screws | Black | ABS Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Black | Long Screw / #4 to 40 Imperial Thread | Junction shell | Plastic divided type/straight clamp | Long screw/#4-40 inch screws | Black | ABS Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | - | Hood | Plastic | Direct Type Hood | Black | Long Screw / M3 Metric Thread | Junction shell | Plastic divided type/straight clamp | Long screw/M3 metric screws | Black | ABS Resin | Non-Compatible | - | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Silver | Short Screw / M2.6 Metric Thread | Junction shell | Plastic divided type/straight clamp | Short screw/M2.6 mm screw | - | ABS Resin | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Silver | Short Screw / #4 to 40 Imperial Thread | Junction shell | Plastic divided type/straight clamp | Short screw/#4-40 inch screw | - | ABS Resin | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Silver | Short Screw / M3 Metric Thread | Junction shell | Plastic divided type/straight clamp | Short screw/M3 mm screw | - | ABS Resin | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Silver | Long Screw / M2.6 Metric Thread | Junction shell | Plastic divided type/straight clamp | Long screw/M2.6 metric screws | - | ABS Resin | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Silver | Long Screw / #4 to 40 Imperial Thread | Junction shell | Plastic divided type/straight clamp | Long screw/#4-40 inch screws | - | ABS Resin | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Plastic | Direct Type Hood | Silver | Long Screw / M3 Metric Thread | Junction shell | Plastic divided type/straight clamp | Long screw/M3 metric screws | - | ABS Resin | Corresponds To | Nickel Plating | A | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Other | Metal | - | - | - | Strain relief | - | - | - | - | Non-Compatible | - | A | DASP-JB15PR/DASP-JB15SR | - | - | A strain relief should be purchased separately from the connector main body | -55 to +105 | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Metal | Direct Type Hood | Silver | - | Junction shell | Metal square shape clamp | - | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | B | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | - | Hood | Metal | L Type Hood | Silver | - | Junction shell | Metal angle clamp | - | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | B | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Metal | Direct Type Hood | Silver | - | Junction shell | Metal round clamp | - | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | B | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Hood | Metal | Direct Type Hood | Silver | - | Junction shell | Metal rectangle clamp | - | - | Steel | Non-Compatible | Trivalent chromate on zinc plating | B | - | - | - | - | - |
Loading...
Specification/Dimensions
-
Type
- Hood
- Connector Fastener
- Other
-
Material
-
Specification
- Direct Type Hood
- L Type Hood
-
Color
- Black
- Light Gray
- Silver
-
Features
- M2.5 Metric Thread
- Long Screw / M2.6 Metric Thread
- M2.6 Metric Thread
- Short Screw / M2.6 Metric Thread
- Long Screw / M3 Metric Thread
- M3 Metric Thread
- Short Screw / M3 Metric Thread
- #4 to 40 Imperial Thread
- Long Screw / #4 to 40 Imperial Thread
- Short Screw / #4 to 40 Imperial Thread
- Without Thread
-
Product Category
- Junction shell
- Mating fixed base
- Screw locking device
- Sliding lock device
- Spring lock device
- Strain relief
-
Type
- For front mounting of lock nuts (female side)
- For front/rear mounting of lock nuts (female side)
- Locking screw (male side)
- Metal Hood
- Metal angle clamp
- Metal rectangle clamp
- Metal round clamp
- Metal square shape clamp
- Plastic divided type/straight clamp
- Plastic/straight clamp
- Plate
- Post
- Retainer plate
- Spring
-
Features
- M2.5 millimeter screw
- Long screw/M2.6 metric screws
- M2.6 millimeter screw
- Short screw/M2.6 mm screw
- Long screw/M3 metric screws
- M3 millimeter screw
- Short screw/M3 mm screw
- #4-40 inch screws
- Long screw/#4-40 inch screws
- Short screw/#4-40 inch screw
- Without Screw
-
Color
- Black
- Light gray
-
Material
- ABS Resin
- Aluminum Die Casting
- Stainless Steel
- Steel
- Synthetic Resin
- Zinc Alloy
-
EMI Measure
- Corresponds To
- Non-Compatible
-
Finishing
- Nickel Plating
- Trivalent chromate on zinc plating
-
Conforming shell size
-
Conforming product
-
Mating stand shape
- Hexagonal shape (long)
- Hexagonal shape (short)
- Rectangle
Days to Ship
-
- All
- 9 Day(s) or Less
- 16 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy