SATA3 cable

Caution
Product Description
SATA3 compliant cable with a transfer rate of 6 Gbps with both connector latches.
[Features]
・ For devices such as SATA3 compliant hard disks
・ It is a cable compliant with SATA3 600 MB/S
・ A method in which multiple bits are transmitted in sequence using a single line does not cause signal misalignment between data lines
・ Since Serial ATA is a serial transmission method, the number of signal lines is greatly reduced and there is no need to set jumper pins
・ Drive and mother can be connected one-to-one (There is no distinction between master and slave)
・ With a latch that clicks on the HDD (Latch may not be supported depending on the model)
[Applications]
・ Ideal for transmitting data over long distances
Cable compatible with a transfer rate of 6.0 Gb/s

Features of SATA3 cable
| Cable Length | 0.5 m |
|---|---|
| Connector | SATA connector, 7 pins, female (with latch)-SATA connector, 7 pins, female (With latch) |
| Wire rod thickness | 26AWG |
Features of this product

Compared with the conventional serial ATA2 (300 Mb/s), the effective speed of serial ATA3 (600 Mb/s) is approx. twice.

With both latch connectors.
- * Fixing with a latch connector (stopper) requires a connector that supports HDD latch.
- * It may interfere with a SATA power supply.

Compatible with serial ATA3 standard.