(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 30/6/2024 sampai dengan 5:00 pada tanggal 1/7/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 (WIB) 1/7/2024. We apologize for the inconvenience.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

[ILME Connector Accessories]Board Interface Coding Pin

[ILME Connector Accessories]Board Interface Coding Pin

[Features]
・ Accessories for convenient use of ILME connectors
・ There are interfaces for PCB, special contact pins, frames, code pins, etc.
・ Further notes: By using a cord pin, you can prevent accidental insertion into parallel heterogeneous connectors

(i)Caution

  • The product images are representative images only.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
CDFA 6A
CIF 2.4
CIF 2.4 A
CKM 03 T1
CKR 65
CKR 65 D
CR 06 AT
CR 06 SC
CR 06 ST
CR 09 AD
CR 09 AD1
CR 09 AD2
CR 10 AT
CR 10 CA
CR 10 SC
CR 10 ST
CR 15 AD
CR 15 AD1
CR 15 AD2
CR 16 AT
CR 16 SC
CR 16 ST
CR 20
CR 20 CX
CR 20 CX D
CR 20 D
CR 24 AT
CR 24 ATD
CR 24 SC
CR 24 SCA
CR 24 ST
CR 25 AD
CR 25 AD1
CR 25 AD2
CR 37 AD
CR 37 AD1
CR 37 AD2
CR 50 AD
CR 50 AD1
CR 50 AD2
CR CP
CR CPQ
CR Q12
CRF
CRF CX
CRF D
CRM
CRM CX
CRM CX D
CRM D
CRQ 16
CRQ 21
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSPart names Application Details Material Note
1 Piece(s) 16 Day(s) or more 106A contact for interfaceFor 6A female contact, female insertIncludes φ 1 mm terminalsSilver Plated-
1 Piece(s) 16 Day(s) or more 10Interface for printed circuit boardsFor interface module printed circuit boardIncludes 6 female contacts (gold plated)--
1 Piece(s) 16 Day(s) or more 10Interface for printed circuit boardsFor interface module printed circuit boardIncludes 6 female contacts (silver plated)--
1 Piece(s) 16 Day(s) or more 10For terminal connector CKF03Connection: Pin 2, Pin 3Includes peg, seal--
5 Piece(s) 16 Day(s) or more 10Seal and the screw setsFor IP66/IP67/CK, CQ05, CKS and others--See the catalog
5 Piece(s) 16 Day(s) or more 10Seal and the screw setsFor IP66/IP67/CD08 and others--See the catalog
1 Piece(s) 16 Day(s) or more 10Terminal for multiple ground cablesFor “44.27” enclosure and 2-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cables and ground“44.27” enclosure and 3-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cablesFor “44.27” enclosure and 2-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 9 pin connectorFor CZ/MZ/MZF enclosure--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 9 pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 2D-SUB 9 pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Terminal for multiple ground cablesFor “57.27” enclosure and 3-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Clamp metal fittings for shield cable with diameter of 10 mmFor CR, ST ground terminal---
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cables and ground“57.27” enclosure and 3-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cablesFor “57.27” enclosure and 3-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 15-pin connectorFor CZ/MZ/MZF enclosure--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 15-pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 2D-SUB 15 pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Terminal for multiple ground cablesFor “77.27” enclosure and 4-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cables and ground“77.27” enclosure and 3-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cablesFor “77.27” enclosure and 4-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Single coating pin (to prevent mis-insertion) for 6 coatingsSingle coding pin-Stainless Steel-
1 Piece(s) 16 Day(s) or more 10Single coating pin (to prevent mis-insertion) for 6 coatingsSingle coding pinMIXO inserts onlyStainless Steel-
3 Piece(s) 16 Day(s) or more 10Single coating pin (to prevent mis-insertion) for 6 coatingsSingle coding pinMIXO inserts onlyMade of galvanized steel-
5 Piece(s) 16 Day(s) or more 10Single coating pin (to prevent mis-insertion) for 6 coatingsSingle coding pin-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Terminal for multiple ground cablesFor “104.27” enclosure and 6-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Terminal for multiple ground cablesFor “104.27” enclosure and 6-module MIXO frameCrank typeMade of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cables and ground“104.27” enclosure and 3-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cables and groundFor CSS “104.27” enclosure and insert-Made of galvanized steelCan only be equipped on the bulkhead housing
1 Piece(s) 16 Day(s) or more 10Ground terminal for multiple shielded cablesFor “104.27” enclosure and 6-module MIXO frame-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 25 pin connectorFor CZ/MZ/MZF enclosure--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 25 pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 2D-SUB 25 pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 37 pin connectorFor CZ/MZ/MZF enclosure--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 37 pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 2D-SUB 37 pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 50 pin connectorFor CZ/MZ/MZF enclosure--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 1D-SUB 50 pin connectorFor CH/CA and MH/MA/MF enclosures--
1 Piece(s) 16 Day(s) or more 10Plate for D-SUB connector (IEC60807-2)For 2D-SUB 50 pin connectorFor CH/CA and MH/MA/MF enclosures--
6 Piece(s) 16 Day(s) or more 10For coding pin crimped wire connection type insertFor coding pin CD07 and CD08 inserts---
6 Piece(s) 16 Day(s) or more 10For coding pin crimped wire connection type insertFor coding pin CDC, CQ, CQE, CCE, CMCE MIXO(16a), inserts---
7 Piece(s) 16 Day(s) or more 10For coding pin CQ 12 insertFor coding pin CQ12 inserts---
1 Piece(s) 16 Day(s) or more 10For dual-coding and guide pin 16 codingFemale pin-Stainless Steel-
1 Piece(s) 16 Day(s) or more 10For dual-coding and guide pin 16 codingFemale pinMIXO inserts onlyStainless Steel-
1 Piece(s) 16 Day(s) or more 10For dual-coding and guide pin 16 codingFemale pin-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10For dual-coding and guide pin 16 codingMale pin-Stainless Steel-
1 Piece(s) 16 Day(s) or more 10For dual-coding and guide pin 16 codingMale pinMIXO inserts onlyStainless Steel-
4 Piece(s) 16 Day(s) or more 10For dual-coding and guide pin 16 codingMale pinMIXO inserts onlyMade of galvanized steel-
4 Piece(s) 16 Day(s) or more 10For dual-coding and guide pin 16 codingMale pin-Made of galvanized steel-
1 Piece(s) 16 Day(s) or more 10Thermoplastic resin, cable groundFor cable grand head, seal, CQ08VA enclosureCh:27mm--
1 Piece(s) 16 Day(s) or more 10Thermoplastic resin, cable groundFor cable grand head, seal, CQ08V, VG and IAP enclosureCh:33mm--

Loading...

  1. 1

Tech Support