(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC (Part Numbers)

Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

PDF

Part Number

Configured Part Number is shown.

WH-VM-PNC-1.5-0.4

Part Number
WH-VM-PNC-1.5-0.4
Part NumberMinimum order quantityVolume DiscountDays to ShipThread Types Pitch, Number of Threads
(mm)
Work Material Coating Type Major Diameter
(mm)
Blade Length
(mm)
Length Under Neck
(mm)
Link Diameter
(mm)
Minimum Processing Diameter
(mm)
Thread Count of Screw Thread Details of Coating Tool No.
1 Piece(s) 8 Day(s) or more Meter0.4Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / High-Hardness Steel (50 - 60 HRC)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[○] / Thermoplastic (PVC, Nylon etc.)[○]For High Hardness (Silicone-Based)1.51.24.46M23WXL coated3900500

Loading...

  1. 1
 

Basic Information

Tool Material Type Carbide Tap Model Tapping Cutter Bore Model For Through Holes / For Blind Holes
Coating Presence Included L(mm) 40 No. of Grooves 3
Torsion Angle(°) 11 External center -

Please check the type/dimensions/specifications of the part WH-VM-PNC-1.5-0.4 in the Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC series.

Products like this...

Part Number
WH-VM-PNC-1.05-0.3
WH-VM-PNC-1.2-0.35
WH-VM-PNC-1.3-0.35
WH-VM-PNC-1.9-0.45
WH-VM-PNC-2.4-0.5
WH-VM-PNC-3.1-0.7
Part NumberMinimum order quantityVolume DiscountDays to ShipThread Types Pitch, Number of Threads
(mm)
Work Material Coating Type Major Diameter
(mm)
Blade Length
(mm)
Length Under Neck
(mm)
Link Diameter
(mm)
Minimum Processing Diameter
(mm)
Thread Count of Screw Thread Details of Coating Tool No.
1 Piece(s) 12 Day(s) or more Meter0.3Stainless Steel (SUS)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◯] / High-Carbon Steel (C Content Exceeding 0.45%)[◯] / Low-Carbon Steel (C Content of 0.25% or Less)[◯] / Thermosetting Plastic (Bakelite, Phenol etc.)[◯] / Thermoplastic (PVC, Nylon etc.)[◯] / Titanium Alloy (Ti-6Al-4V Equivalent)[◯] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Brass Cast Iron (BsC)[◎] / Cast Iron (FC)[◯] / Ductile Cast Iron (FCD)[◯] / Cast Steel (SC)[◯]Others1.050.33.83M1.41SS coating3900497
1 Piece(s) 12 Day(s) or more Meter0.35Stainless Steel (SUS)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◯] / High-Carbon Steel (C Content Exceeding 0.45%)[◯] / Low-Carbon Steel (C Content of 0.25% or Less)[◯] / Thermosetting Plastic (Bakelite, Phenol etc.)[◯] / Thermoplastic (PVC, Nylon etc.)[◯] / Titanium Alloy (Ti-6Al-4V Equivalent)[◯] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Brass Cast Iron (BsC)[◎] / Cast Iron (FC)[◯] / Ductile Cast Iron (FCD)[◯] / Cast Steel (SC)[◯]Others1.20.354.353M1.61SS coating3900498
1 Piece(s) 8 Day(s) or more Meter0.35Stainless Steel (SUS)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◯] / High-Carbon Steel (C Content Exceeding 0.45%)[◯] / Low-Carbon Steel (C Content of 0.25% or Less)[◯] / Thermosetting Plastic (Bakelite, Phenol etc.)[◯] / Thermoplastic (PVC, Nylon etc.)[◯] / Titanium Alloy (Ti-6Al-4V Equivalent)[◯] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Brass Cast Iron (BsC)[◎] / Cast Iron (FC)[◯] / Ductile Cast Iron (FCD)[◯] / Cast Steel (SC)[◯]Others1.30.354.853M1.7,M1.81SS coating3900499
1 Piece(s) 12 Day(s) or more Meter0.45Heat-Treated Steel (45 - 55 HRC)[◎] / High-Hardness Steel (50 - 60 HRC)[◯] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Alloy Steel (SCM)[◯] / Stainless Steel (SUS)[◯] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◯] / High-Carbon Steel (C Content Exceeding 0.45%)[◯] / Low-Carbon Steel (C Content of 0.25% or Less)[◯] / Thermosetting Plastic (Bakelite, Phenol etc.)[◯] / Thermoplastic (PVC, Nylon etc.)[◯] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Cast Magnesium Alloy (MC)[◯] / Zinc Alloy Castings (ZDC)[◯] / Rolled Aluminum Material (AL)[◯] / Cast Aluminum Alloy (AC, ADC)[◯] / Brass Cast Iron (BsC)[◯] / Cast Iron (FC)[◯] / Ductile Cast Iron (FCD)[◯] / Cast Steel (SC)[◯]Others1.91.45.66M2.5, M2.63WXL coated3900501
1 Piece(s) 12 Day(s) or more Meter0.5Heat-Treated Steel (45 - 55 HRC)[◎] / High-Hardness Steel (50 - 60 HRC)[◯] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Alloy Steel (SCM)[◯] / Stainless Steel (SUS)[◯] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◯] / High-Carbon Steel (C Content Exceeding 0.45%)[◯] / Low-Carbon Steel (C Content of 0.25% or Less)[◯] / Thermosetting Plastic (Bakelite, Phenol etc.)[◯] / Thermoplastic (PVC, Nylon etc.)[◯] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Cast Magnesium Alloy (MC)[◯] / Zinc Alloy Castings (ZDC)[◯] / Rolled Aluminum Material (AL)[◯] / Cast Aluminum Alloy (AC, ADC)[◯] / Brass Cast Iron (BsC)[◯] / Cast Iron (FC)[◯] / Ductile Cast Iron (FCD)[◯] / Cast Steel (SC)[◯]Others2.41.56.56M33WXL coated3900502
1 Piece(s) 12 Day(s) or more Meter0.7Heat-Treated Steel (45 - 55 HRC)[◎] / High-Hardness Steel (50 - 60 HRC)[◯] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Alloy Steel (SCM)[◯] / Stainless Steel (SUS)[◯] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◯] / High-Carbon Steel (C Content Exceeding 0.45%)[◯] / Low-Carbon Steel (C Content of 0.25% or Less)[◯] / Thermosetting Plastic (Bakelite, Phenol etc.)[◯] / Thermoplastic (PVC, Nylon etc.)[◯] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Cast Magnesium Alloy (MC)[◯] / Zinc Alloy Castings (ZDC)[◯] / Rolled Aluminum Material (AL)[◯] / Cast Aluminum Alloy (AC, ADC)[◯] / Brass Cast Iron (BsC)[◯] / Cast Iron (FC)[◯] / Ductile Cast Iron (FCD)[◯] / Cast Steel (SC)[◯]Others3.12.18.76M43WXL coated3900503

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)