(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE (WXL-3D-DE-2.3)

Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE WXL-3D-DE-2.3

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

PDF

Part Number

Configured Part Number is shown.

WXL-3D-DE-2.3

Part Number
WXL-3D-DE-2.3
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Blade tip shape Tool No. Flute Diameter Tolerance
(mm)
1 Piece(s) 2 Day(s) 2.36.9445Sharp Corner31824230~-0.02

Loading...

  1. 1
 

Basic Information

work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper Number of flutes(sheet) 2 Type Square
Coating For General Steel (AlCrN etc.) Machining Application Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting Torsion Angle (θ) Standard Helix (30 to 40°)

Please check the type/dimensions/specifications of the part WXL-3D-DE-2.3 in the Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE series.

Products like this...

Part Number
WXL-3D-DE-0.4
WXL-3D-DE-0.5
WXL-3D-DE-0.6
WXL-3D-DE-2.4
WXL-3D-DE-2.5
WXL-3D-DE-2.6
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Blade tip shape Tool No. Flute Diameter Tolerance
(mm)
1 Piece(s) 2 Day(s) 0.41.2445Sharp Corner31824040~-0.02
1 Piece(s) 2 Day(s) 0.51.5445Sharp Corner31824050~-0.02
1 Piece(s) 2 Day(s) 0.61.8445Sharp Corner31824060~-0.02
1 Piece(s) 12 Day(s) or more 2.47.2445Sharp Corner31824240~-0.02
1 Piece(s) 2 Day(s) 2.57.5445Sharp Corner31824250~-0.02
1 Piece(s) 2 Day(s) 2.67.8445Sharp Corner31824260~-0.02

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)