(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Micro Grain Carbide Miniature (φ3 shank) End Mills 2 Flutes_MG-EDS-3

Micro Grain Carbide Miniature (φ3 shank) End Mills 2 Flutes_MG-EDS-3

Uses high toughness carbide alloy with high Young's modulus.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
MG-EDS-3-0.1
MG-EDS-3-0.2
MG-EDS-3-0.3
MG-EDS-3-0.4
MG-EDS-3-0.5
MG-EDS-3-0.6
MG-EDS-3-0.7
MG-EDS-3-0.8
MG-EDS-3-0.9
MG-EDS-3-0.15
MG-EDS-3-0.25
MG-EDS-3-0.35
MG-EDS-3-0.45
MG-EDS-3-0.55
MG-EDS-3-0.65
MG-EDS-3-0.75
MG-EDS-3-0.85
MG-EDS-3-0.95
MG-EDS-3-1
MG-EDS-3-1.05
MG-EDS-3-1.1
MG-EDS-3-1.2
MG-EDS-3-1.3
MG-EDS-3-1.4
MG-EDS-3-1.5
MG-EDS-3-1.6
MG-EDS-3-1.7
MG-EDS-3-1.8
MG-EDS-3-1.9
MG-EDS-3-1.15
MG-EDS-3-1.25
MG-EDS-3-1.35
MG-EDS-3-1.45
MG-EDS-3-1.55
MG-EDS-3-1.65
MG-EDS-3-1.75
MG-EDS-3-1.85
MG-EDS-3-1.95
MG-EDS-3-2
MG-EDS-3-2.05
MG-EDS-3-2.1
MG-EDS-3-2.2
MG-EDS-3-2.3
MG-EDS-3-2.4
MG-EDS-3-2.5
MG-EDS-3-2.6
MG-EDS-3-2.7
MG-EDS-3-2.8
MG-EDS-3-2.9
MG-EDS-3-2.15
MG-EDS-3-2.25
MG-EDS-3-2.35
MG-EDS-3-2.45
MG-EDS-3-2.55
MG-EDS-3-2.65
MG-EDS-3-2.75
MG-EDS-3-2.85
MG-EDS-3-2.95
MG-EDS-3-3
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Blade tip shape Tool No.
1 Piece(s) 12 Day(s) or more 0.10.2With Lead84601
1 Piece(s) 12 Day(s) or more 0.20.6With Lead84602
1 Piece(s) 8 Day(s) or more 0.30.8With Lead84603
1 Piece(s) 12 Day(s) or more 0.41.2With Lead84604
1 Piece(s) 8 Day(s) or more 0.51.5With Lead84605
1 Piece(s) 12 Day(s) or more 0.61.7With Lead84606
1 Piece(s) 8 Day(s) or more 0.72.2With Lead84607
1 Piece(s) 12 Day(s) or more 0.82.4With Lead84608
1 Piece(s) 12 Day(s) or more 0.92.6With Lead84609
1 Piece(s) 12 Day(s) or more 0.150.3With Lead84631
1 Piece(s) 12 Day(s) or more 0.250.8With Lead84632
1 Piece(s) 12 Day(s) or more 0.351.1With Lead84633
1 Piece(s) 12 Day(s) or more 0.451.3With Lead84634
1 Piece(s) 12 Day(s) or more 0.551.7With Lead84635
1 Piece(s) 8 Day(s) or more 0.651.9With Lead84636
1 Piece(s) 12 Day(s) or more 0.752.2With Lead84637
1 Piece(s) 12 Day(s) or more 0.852.4With Lead84638
1 Piece(s) 8 Day(s) or more 0.952.6With Lead84639
1 Piece(s) 12 Day(s) or more 13With Lead84610
1 Piece(s) 12 Day(s) or more 1.053With Lead84640
1 Piece(s) 12 Day(s) or more 1.13.4With Lead84611
1 Piece(s) 12 Day(s) or more 1.23.8With Lead84612
1 Piece(s) 12 Day(s) or more 1.33.8With Lead84613
1 Piece(s) 12 Day(s) or more 1.44.2With Lead84614
1 Piece(s) 12 Day(s) or more 1.54.2With Lead84615
1 Piece(s) 12 Day(s) or more 1.64.8With Lead84616
1 Piece(s) 12 Day(s) or more 1.74.8With Lead84617
1 Piece(s) 12 Day(s) or more 1.85.3With Lead84618
1 Piece(s) 8 Day(s) or more 1.95.3With Lead84619
1 Piece(s) 12 Day(s) or more 1.153.4With Lead84641
1 Piece(s) 12 Day(s) or more 1.253.8With Lead84642
1 Piece(s) 12 Day(s) or more 1.354.2With Lead84643
1 Piece(s) 12 Day(s) or more 1.454.2With Lead84644
1 Piece(s) 12 Day(s) or more 1.554.8With Lead84645
1 Piece(s) 12 Day(s) or more 1.654.8With Lead84646
1 Piece(s) 12 Day(s) or more 1.755.3With Lead84647
1 Piece(s) 12 Day(s) or more 1.855.3With Lead84648
1 Piece(s) 12 Day(s) or more 1.956Sharp Corner84649
1 Piece(s) 12 Day(s) or more 26Sharp Corner84620
1 Piece(s) 12 Day(s) or more 2.056Sharp Corner84650
1 Piece(s) 12 Day(s) or more 2.16Sharp Corner84621
1 Piece(s) 12 Day(s) or more 2.26.7Sharp Corner84622
1 Piece(s) 12 Day(s) or more 2.36.7Sharp Corner84623
1 Piece(s) 8 Day(s) or more 2.48Sharp Corner84624
1 Piece(s) 12 Day(s) or more 2.58Sharp Corner84625
1 Piece(s) 12 Day(s) or more 2.68Sharp Corner84626
1 Piece(s) 12 Day(s) or more 2.78Sharp Corner84627
1 Piece(s) 12 Day(s) or more 2.88Sharp Corner84628
1 Piece(s) 12 Day(s) or more 2.98Sharp Corner84629
1 Piece(s) 12 Day(s) or more 2.156.7Sharp Corner84651
1 Piece(s) 12 Day(s) or more 2.256.7Sharp Corner84652
1 Piece(s) 8 Day(s) or more 2.356.7Sharp Corner84653
1 Piece(s) 12 Day(s) or more 2.458Sharp Corner84654
1 Piece(s) 8 Day(s) or more 2.558Sharp Corner84655
1 Piece(s) 12 Day(s) or more 2.658Sharp Corner84656
1 Piece(s) 12 Day(s) or more 2.758Sharp Corner84657
1 Piece(s) 12 Day(s) or more 2.858Sharp Corner84658
1 Piece(s) 12 Day(s) or more 2.958Sharp Corner84659
1 Piece(s) 8 Day(s) or more 38Sharp Corner84630

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper Number of flutes(sheet) 2 Type Square
Coating Non-Coated Shank diameter (d)(mm) 3 Overall Length (L)(mm) 40
Machining Application Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting Torsion Angle (θ) Standard Helix (30 to 40°) Flute Diameter Tolerance(mm) 0~-0.02

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)