(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Micro Grain Carbide End Mills 4 Flutes Long_MG-EML

Micro Grain Carbide End Mills 4 Flutes Long_MG-EML

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

The shape of the cutting edge is sharp for diameters up to ⌀9.5, and sharp for diameters of ⌀10 or more.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
MG-EML-3
MG-EML-3.5
MG-EML-4
MG-EML-4.5
MG-EML-5
MG-EML-5.5
MG-EML-6
MG-EML-6.5
MG-EML-7
MG-EML-7.5
MG-EML-8
MG-EML-8.5
MG-EML-9
MG-EML-9.5
MG-EML-10
MG-EML-10.5
MG-EML-11
MG-EML-11.5
MG-EML-12
MG-EML-13
MG-EML-14
MG-EML-15
MG-EML-16
MG-EML-17
MG-EML-18
MG-EML-19
MG-EML-20
MG-EML-21
MG-EML-22
MG-EML-23
MG-EML-24
MG-EML-25
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Blade tip shape Tool No.
1 Piece(s) 8 Day(s) or more 312650Sharp Corner84506
1 Piece(s) 12 Day(s) or more 3.514650Sharp Corner84507
1 Piece(s) 8 Day(s) or more 417650Sharp Corner84508
1 Piece(s) 12 Day(s) or more 4.517650Sharp Corner84509
1 Piece(s) 8 Day(s) or more 520660Sharp Corner84510
1 Piece(s) 12 Day(s) or more 5.520660Sharp Corner84511
1 Piece(s) 12 Day(s) 620660Sharp Corner84512
1 Piece(s) 12 Day(s) or more 6.524870Sharp Corner84513
1 Piece(s) 12 Day(s) or more 724870Sharp Corner84514
1 Piece(s) 12 Day(s) or more 7.524870Sharp Corner84515
1 Piece(s) 12 Day(s) or more 828870Sharp Corner84516
1 Piece(s) 12 Day(s) or more 8.5281080Sharp Corner84517
1 Piece(s) 8 Day(s) or more 9281080Sharp Corner84518
1 Piece(s) 12 Day(s) or more 9.5281080Sharp Corner84519
1 Piece(s) 8 Day(s) or more 10341080With Lead84520
1 Piece(s) 12 Day(s) or more 10.5341290With Lead84541
1 Piece(s) 12 Day(s) or more 11341290With Lead84521
1 Piece(s) 12 Day(s) or more 11.5341290With Lead84542
1 Piece(s) 12 Day(s) or more 12401290With Lead84522
1 Piece(s) 8 Day(s) or more 134012100With Lead84523
1 Piece(s) 8 Day(s) or more 144012100With Lead84524
1 Piece(s) 8 Day(s) or more 154016105With Lead84525
1 Piece(s) 8 Day(s) or more 164816115With Lead84526
1 Piece(s) 8 Day(s) or more 174816115With Lead84527
1 Piece(s) 8 Day(s) or more 184816115With Lead84528
1 Piece(s) 8 Day(s) or more 194820115With Lead84529
1 Piece(s) 8 Day(s) or more 205620125With Lead84530
1 Piece(s) 8 Day(s) or more 215620125With Lead84531
1 Piece(s) 8 Day(s) or more 225620125With Lead84532
1 Piece(s) 8 Day(s) or more 236725140With Lead84533
1 Piece(s) 8 Day(s) or more 246725140With Lead84534
1 Piece(s) 8 Day(s) or more 256725140With Lead84535

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper Number of flutes(sheet) 4 Type Square
Coating Non-Coated Machining Application Flat Surface / Side Surface / Groove / Inclined Cutting Torsion Angle (θ) Standard Helix (30 to 40°)
Flute Diameter Tolerance(mm) 0~-0.03

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)