(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
FX-CR-MG-EDL-6XR0.5
FX-CR-MG-EDL-6XR1
FX-CR-MG-EDL-8XR0.5
FX-CR-MG-EDL-8XR1
FX-CR-MG-EDL-8XR1.5
FX-CR-MG-EDL-8XR2
FX-CR-MG-EDL-10XR0.5
FX-CR-MG-EDL-10XR1
FX-CR-MG-EDL-10XR1.5
FX-CR-MG-EDL-10XR2
FX-CR-MG-EDL-12XR0.5
FX-CR-MG-EDL-12XR1
FX-CR-MG-EDL-12XR1.5
FX-CR-MG-EDL-12XR2
FX-CR-MG-EDL-12XR3
FX-CR-MG-EDL-16XR2
FX-CR-MG-EDL-20XR2
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
R Size
(mm)
Blade length (ℓ)
(mm)
Overall Length (L)
(mm)
Shank diameter (d)
(mm)
Tool No.
1 Piece(s) 12 Day(s) or more 60.5209068523643
1 Piece(s) 8 Day(s) or more 61209068523645
1 Piece(s) 8 Day(s) or more 80.52810088523663
1 Piece(s) 12 Day(s) or more 812810088523665
1 Piece(s) 12 Day(s) or more 81.52810088523667
1 Piece(s) 12 Day(s) or more 822810088523669
1 Piece(s) 8 Day(s) or more 100.534100108523683
1 Piece(s) 8 Day(s) or more 10134100108523685
1 Piece(s) 12 Day(s) or more 101.534100108523687
1 Piece(s) 12 Day(s) or more 10234100108523689
1 Piece(s) 8 Day(s) or more 120.540110128523703
1 Piece(s) 12 Day(s) or more 12140110128523705
1 Piece(s) 12 Day(s) or more 121.540110128523707
1 Piece(s) 12 Day(s) or more 12240110128523709
1 Piece(s) 12 Day(s) or more 12340110128523713
1 Piece(s) 8 Day(s) or more 1624814016-
1 Piece(s) 8 Day(s) or more 2025616020-

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper Number of flutes(sheet) 2 Type Radius
Machining Application Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) Coating TiAlN Torsion Angle (θ) Standard Helix (30 to 40°)
Surface Coating FX

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)