(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product] (AZS3015-045)

AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product] AZS3015-045

[Features]
· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
· Adopts a 45° torsion angle to achieve excellent chip discharge performance
· The blade shape dedicated for aluminum greatly suppresses the generation of burrs
· Tip chipping has been greatly reduced by adopting a micro flat land

PDF

Japanese Only

Part Number

Configured Part Number is shown.

AZS3015-045

 
Part Number
AZS3015-045
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Flute Diameter Tolerance
(mm)
Neck Diameter φd1
(mm)
Shank Taper Angle Bta
(°)
1 Piece(s) 8 Day(s) or more 1.534604.50~-0.0151.4316°

Loading...

  1. 1

Basic Information

work material Aluminum / Copper / Resin Number of flutes(sheet) 3 Type Long Neck Square
Coating Non-Coated Machining Application Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting Blade tip shape With Lead
Torsion Angle (θ) Powerful Helix (45° to 60°)

Please check the type/dimensions/specifications of the part AZS3015-045 in the AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product] series.

Products like this...

Part Number
AZS3010-030
AZS3010-050
AZS3020-060
AZS3020-100
AZS3025-075
AZS3030-090
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Flute Diameter Tolerance
(mm)
Neck Diameter φd1
(mm)
Shank Taper Angle Bta
(°)
1 Piece(s) 12 Day(s) 1246030~-0.0150.9516°
1 Piece(s) 8 Day(s) or more 1246050~-0.0150.9516°
1 Piece(s) 12 Day(s) 2446060~-0.0151.9316°
1 Piece(s) 13 Day(s) or more 24460100~-0.0151.9316°
1 Piece(s) 12 Day(s) or more 2.554607.50~-0.0152.416°
1 Piece(s) 13 Day(s) or more 3667090~-0.0152.916°

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)