(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Taper Ball End Mill (NTB-2-R1.25-1)

Taper Ball End Mill NTB-2-R1.25-1

[Work Material]
○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel
◎; copper, aluminum alloy, resin

PDF

Part Number

Configured Part Number is shown.

NTB-2-R1.25-1

 
Part Number
NTB-2-R1.25-1
Part NumberMinimum order quantityVolume DiscountDays to ShipSingle Angle (θ)
(Degree)
Flute Length (l)
(mm)
R Size
(mm)
Link Diameter (d)
(mm)
Overall Length (L)
(mm)
Manufacturer Code (d1) Large Point Diameter
(mm)
(γ) Neck Angle
(°)
1 Piece(s) 12 Day(s) or more 1151.2545501-00352-012522.98

Loading...

  1. 1

Basic Information

Type Tapered Bore Work Material General Steel / Heat-Treated Steel / Stainless Steel / Aluminum / Copper / Resin Number of Flutes(sheet) 2
Coating Non-Coated Torsion Angle(°) Standard torsion (30-40°)

Please check the type/dimensions/specifications of the part NTB-2-R1.25-1 in the Taper Ball End Mill series.

Products like this...

Part Number
NTB-2-R0.5-10
NTB-2-R0.5-2
NTB-2-R0.5-3
NTB-2-R1.25-1.5
NTB-2-R1.25-10
NTB-2-R1.25-2
Part NumberMinimum order quantityVolume DiscountDays to ShipSingle Angle (θ)
(Degree)
Flute Length (l)
(mm)
R Size
(mm)
Link Diameter (d)
(mm)
Overall Length (L)
(mm)
Manufacturer Code (d1) Large Point Diameter
(mm)
(γ) Neck Angle
(°)
1 Piece(s) 12 Day(s) or more 10100.545001-00352-005094.37-
1 Piece(s) 12 Day(s) or more 2100.545001-00352-005041.66
1 Piece(s) 12 Day(s) or more 3100.545001-00352-005052
1 Piece(s) 12 Day(s) or more 1.5151.2545501-00352-012533.22
1 Piece(s) 12 Day(s) or more 10151.2565501-00352-012597.39-
1 Piece(s) 12 Day(s) or more 2151.2545501-00352-012543.46

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)