(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Miter Rule

Miter Rule

[Features]
· A two-in-one type that can be used as a miter rule or a full set square.
· One side can be inked at 45 degrees.

  • STOCK

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
62081
62189
Part NumberMinimum order quantityVolume DiscountDays to ShipType Base Length x Width x Thickness
(mm)
Mass
(g)
1 Piece(s) 1 Day(s) Standard Type163×15×5177
1 Piece(s) 12 Day(s) or more Wide 40 mm With Base163×40×5334

Loading...

  1. 1

Basic Information

Product Type Square With Stand Pole Length(mm) 170 Angle(°) 45/90
Base Length(mm) 163 Scale Available Material Stainless Steel
Overall length x Height x Thickness(mm) 170×100×1.5 Tolerance for length ±0.2mm Angle Accuracy 45°: 0.2 mm or less per 100 mm, 90°: 0.1 mm or less per 100 mm

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)