• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill MXH225P

MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill MXH225P

Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is the same as the blade diameter and the torsion angle is 25°

PDF

Part Number

Configured Part Number is shown.

 
Part Number
MXH225P-0.1
MXH225P-0.2
MXH225P-0.3
MXH225P-0.4
MXH225P-0.5
MXH225P-0.6
MXH225P-0.7
MXH225P-0.8
MXH225P-0.9
MXH225P-1
MXH225P-1.1
MXH225P-1.2
MXH225P-1.3
MXH225P-1.4
MXH225P-1.5
MXH225P-1.6
MXH225P-1.7
MXH225P-1.8
MXH225P-1.9
MXH225P-2
MXH225P-2.5
MXH225P-3
MXH225P-4
MXH225P-5
MXH225P-6
Part NumberVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
(γ) Neck Angle
(°)
Manufacturer Code
11 Day(s) or more 0.10.14451208-00015-00010
11 Day(s) or more 0.20.24451208-00015-00020
11 Day(s) or more 0.30.34451208-00015-00030
11 Day(s) or more 0.40.44451208-00015-00040
11 Day(s) or more 0.50.54451208-00015-00050
11 Day(s) or more 0.60.64451208-00015-00060
11 Day(s) or more 0.70.74451208-00015-00070
11 Day(s) or more 0.80.84451208-00015-00080
11 Day(s) or more 0.90.94451208-00015-00090
11 Day(s) or more 114451208-00015-00100
11 Day(s) or more 1.11.14451208-00015-00110
11 Day(s) or more 1.21.24451208-00015-00120
11 Day(s) or more 1.31.34451208-00015-00130
11 Day(s) or more 1.41.44451208-00015-00140
11 Day(s) or more 1.51.54451208-00015-00150
11 Day(s) or more 1.61.64451208-00015-00160
11 Day(s) or more 1.71.74451208-00015-00170
11 Day(s) or more 1.81.84451208-00015-00180
11 Day(s) or more 1.91.94451208-00015-00190
11 Day(s) or more 224451208-00015-00200
11 Day(s) or more 2.52.54451208-00015-00250
11 Day(s) or more 336451208-00015-00300
11 Day(s) or more 446451208-00015-00400
11 Day(s) or more 556501208-00015-00500
11 Day(s) or more 66650-08-00015-00600

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Aluminum / Titanium / Copper / Resin Number of flutes(sheet) 2 Type Square
Coating For High Hardness (Silicone-Based) Machining Application Flat Surface / Side Surface / Groove Blade tip shape Sharp Corner
Torsion Angle (θ) Weak Helix (15 to 25°)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)