(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P (MXH235P-1.2)

MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P MXH235P-1.2

Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is 3x the blade diameter and the torsion angle is 35°

PDF

Part Number

Configured Part Number is shown.

MXH235P-1.2

 
Part Number
MXH235P-1.2
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
(γ) Neck Angle
(°)
Manufacturer Code
1 Piece(s) 8 Day(s) or more 1.23.64451208-00017-00120

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Aluminum / Titanium / Copper / Resin Number of flutes(sheet) 2 Type Square
Coating For High Hardness (Silicone-Based) Machining Application Flat Surface / Side Surface / Groove Blade tip shape Sharp Corner
Torsion Angle (θ) Standard Helix (30 to 40°)

Please check the type/dimensions/specifications of the part MXH235P-1.2 in the MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P series.

Products like this...

Part Number
MXH235P-0.4
MXH235P-0.5
MXH235P-0.6
MXH235P-1.3
MXH235P-1.4
MXH235P-1.5
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
(γ) Neck Angle
(°)
Manufacturer Code
1 Piece(s) 12 Day(s) or more 0.41.24451208-00017-00040
1 Piece(s) 12 Day(s) or more 0.51.54451208-00017-00050
1 Piece(s) 12 Day(s) or more 0.61.84451208-00017-00060
1 Piece(s) 12 Day(s) or more 1.33.94451208-00017-00130
1 Piece(s) 12 Day(s) or more 1.44.24451208-00017-00140
1 Piece(s) 12 Day(s) or more 1.54.54451208-00017-00150

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)