(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Dove Tail Cutter 4-Flute for O-Ring for Rough Stainless Steel Applications

Carbide Dove Tail Cutter 4-Flute for O-Ring for Rough Stainless Steel Applications

Carbide cutter for O-ring groove.
[Features]
· A carbide cutter that corresponds to the O-ring with groove specification.
· Machinability is improved thanks to adoption of twisted blade.
· For rough machining in processing difficult-to-cut materials.
[Applications]
· Use for O-ring groove rough machining.

PDF

Part Number

Configured Part Number is shown.

Part Number
OAC4RA-1
OAC4RA-2
OAC4RA-3
OAC4RA-4
OAC4RA-5
OAC4RA-6
OAC4RA-7
OAC4RA-8
OAC4RG-1
OAC4RG-2
OAC4RP-1
OAC4RP-2
OAC4RP-3
OAC4RP-4
OAC4RP-5
OAC4RP-6
OAC4RP-7
OAC4RP-8
OAC4RV-1
OAC4RV-2
OAC4RV-3
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade Length
(mm)
R Neck diameter
(mm)
Neck length
(mm)
Overall Length
(mm)
shank diameter
(mm)
Extension intersection
(mm)
Small Diameter
(mm)
Outer Diameter
(mm)
Applicable O-Ring Standards Applicable O-Ring Nominal Number
1 Piece(s) 12 Day(s) or more 1.50.2145031.891.091.77For PressurizationAS568A 004~050
1 Piece(s) 8 Day(s) or more 2.20.21.745032.961.782.84For PressurizationAS568A 102~178
1 Piece(s) 12 Day(s) or more 30.42.546034.182.573.94For PressurizationAS568A 201~284
1 Piece(s) 8 Day(s) or more 4.50.4466066.484.076.24For PressurizationAS568A 309~395
1 Piece(s) 8 Day(s) or more 60.85.5780108.785.568.29For PressurizationAS568A 425~475
1 Piece(s) 8 Day(s) or more 2.70.42.646034.142.693.89VacuumAS568A 201~284
1 Piece(s) 12 Day(s) or more 4.10.44.266066.474.276.22VacuumAS568A 309~395
1 Piece(s) 12 Day(s) or more 5.40.85.7780108.635.748.15VacuumAS568A 425~475
1 Piece(s) 17 Day(s) or more 2.60.42.1546033.612.223.37For PressurizationJIS B2401 G25~G145
1 Piece(s) 8 Day(s) or more 4.90.44.3660874.376.75For PressurizationJIS B2401 G150~G300
1 Piece(s) 16 Day(s) or more 1.60.21.145032.021.171.91For PressurizationJIS B2401 P3~P10
1 Piece(s) 8 Day(s) or more 20.21.5545032.691.622.57For PressurizationJIS B2401 P10A~P22
1 Piece(s) 8 Day(s) or more 30.42.546034.182.573.94For PressurizationJIS B2401 P22A~P50
1 Piece(s) 12 Day(s) or more 4.90.44.3660874.376.75For PressurizationJIS B2401 P48A~P150
1 Piece(s) 12 Day(s) or more 7.20.86.657801210.586.7210.09For PressurizationJIS B2401 P150A~P400
1 Piece(s) 8 Day(s) or more 2.70.42.646034.122.673.87VacuumJIS B2401 P22A~P50
1 Piece(s) 12 Day(s) or more 4.40.44.566086.934.576.69VacuumJIS B2401 P48A~P150
1 Piece(s) 8 Day(s) or more 6.50.86.97801210.456.979.97VacuumJIS B2401 P150A~P400
1 Piece(s) 8 Day(s) or more 3.10.4366064.733.074.49VacuumJIS B2401 V15~V175
1 Piece(s) 8 Day(s) or more 4.60.44.866087.344.877.09VacuumJIS B2401 V225~V430
1 Piece(s) 8 Day(s) or more 7.80.88.257801212.58.3212.01VacuumJIS B2401 V480~V1055

Loading...

  1. 1

Basic Information

Single corner(°) 15 Number of flutes 4 Material Carbide
blade shape Right blade right torsion Torsion Angle degree 15° Shank tolerance h6
Angle Tolerance ±30′ R Tolerance -0.05~0

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)