(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Hand Reamer (HSS) HR

Hand Reamer (HSS) HR

General-purpose straight reamer (HSS) with straight edge that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Blade tip diameter: Available from 0.5 to 60.
· Shank type: Available in end mill shank and straight shank.
· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.
· Material: SKH51. Right-blade Straight, Bite Angle: 1°.
[Applications]
· Optimal for general purpose finishing.

(i)Caution

  • Some products are scheduled to be discontinued from October 2021. Depend on stock status, the end time will be changed. Please check the quotation and order screen for details.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

Part Number
HR0.56
HR0.61
HR0.62
HR0.64
HR0.67
HR0.68
HR0.69
HR0.72
HR0.78
HR0.91
HR0.95
HR0.97
HR1.4
HR1.11
HR1.16
HR1.36
HR1.44
HR1.79
HR1.93
HR1.97
HR2.14
HR2.27
HR2.29
HR2.66
HR2.68
HR2.71
HR2.83
HR2.86
HR2.88
HR3/8
HR3.12
HR3.13
HR3.33
HR3.43
HR3.45
HR3.47
HR3.63
HR3.67
HR3.77
HR4.24
HR4.26
HR4.27
HR4.34
HR4.45
HR4.46
HR4.53
HR4.54
HR4.71
HR4.77
HR4.78
HR4.81
HR5.12
HR5.13
HR5.14
HR5.19
HR5.22
HR5.23
HR5.25
HR5.38
HR5.48
Part NumberMinimum order quantityVolume DiscountDays to ShipTool Diameter
(mm)
Shank Type work material Groove Length
(mm)
Diameter tolerance
(mm)
Number of flutes
(Sheets)
Full length L
(mm)
Bite length T
(mm)
Tool Diameter
(inch)
shank diameter Shank diameter tolerance Tool Material Type Center
1 Piece(s) 12 Day(s) or more 0.56End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12+0.002~+0.0074302.5-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 8 Day(s) or more 0.61End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12+0.002~+0.0074302.5-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.62End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12+0.002~+0.0074302.5-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.64 ~ 11.273End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12+0.002~+0.0074302.5-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.67End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12+0.002~+0.0074302.5-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.68End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12+0.002~+0.0074302.5-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.69End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12+0.002~+0.0074302.5-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.72 ~ 10.364End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12+0.002~+0.0074303-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.78End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]15+0.002~+0.0074353-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.91End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]20+0.002~+0.0074404-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 16 Day(s) or more 0.95End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]20+0.002~+0.0074404-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 0.97 ~ 8.834End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]20+0.002~+0.0074404-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 1.4End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]25+0.002~+0.0074505-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 8 Day(s) or more 1.11End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]25+0.002~+0.0074455-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 1.16End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]25+0.002~+0.0074455-2-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 1.36 ~ 8.133End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]25+0.002~+0.0074505-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 1.44End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]25+0.002~+0.0074505-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 8 Day(s) or more 1.79End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]30+0.002~+0.0074556-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 1.93End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]30+0.002~+0.0074606-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 8 Day(s) or more 0.531 ~ 1.97End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]30+0.002~+0.0074606-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 2.14End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]30+0.002~+0.0074606-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 2.27 ~ 8.958End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35+0.002~+0.0074657-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 1.904 ~ 2.29End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35+0.002~+0.0074657-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 2.66 ~ 13.87End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35+0.002~+0.0074657-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 1.609 ~ 2.68End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35+0.002~+0.0074657-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 2.71 ~ 7.058End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35+0.002~+0.0074657-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 8 Day(s) or more 2.83End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35+0.002~+0.0074657-3-0.02~-0.05High-speed steel60° Convex
1 Piece(s) 12 Day(s) or more 2.86End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.002~+0.0076728-3-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 8 Day(s) or more 2.88End Mill Shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.002~+0.0076728-3-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more -straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]65+0.006 to +0.0126125133/83/8 inch--60° Concave
1 Piece(s) 8 Day(s) or more 3.12straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096758-3.12-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 8 Day(s) or more 3.13straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096758-3.13-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 3.33straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096758-3.33-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 3.43 ~ 7.099straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096758-3.43-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 3.45straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096758-3.45-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 3.47straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096758-3.47-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 3.63straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096808-3.63-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 3.67straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096808-3.67-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 3.77straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]40+0.004~+0.0096808-3.77-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.24 ~ 4.434straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096859-4.24-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.26straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096859-4.26-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 8 Day(s) or more 4.27straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096859-4.27-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.34straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096859-4.34-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 3.166 ~ 4.45straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096859-4.45-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.46straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096859-4.46-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 16 Day(s) or more 1.49 ~ 4.53straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096859-4.53-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.54straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096859-4.54-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.71straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096909-4.71-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.77straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096909-4.77-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.78straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096909-4.78-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 8 Day(s) or more 3.197 ~ 4.81straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.0096909-4.81-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 5.12straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.12-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 5.13straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.13-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 5.14straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.14-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 5.19straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.19-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 5.22straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.22-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 5.23straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.23-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 8 Day(s) or more 5.25straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.25-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 12 Day(s) or more 4.794 ~ 5.38straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.38-0.02~-0.05High-speed steel60° Concave
1 Piece(s) 16 Day(s) or more 5.48 ~ 8.613straight shankgeneral steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]45+0.004~+0.00969510-5.48-0.02~-0.05High-speed steel60° Concave

Loading...

Basic Information

Coating Y/N NA Groove Shape Straight Base Blade Y/N NA
blade shape Right blade straight

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)