(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Air Impact Wrench (360° Swing Type)

Part Number

Configured Part Number is shown.

SI-1650AH

Features

●Head is rotated 360degrees the position is determined for each 90degrees suitable for work in every part.
●With high-tech resin body it is lightweight.
●Left and right rotation can be switched over in one touch.

Specification

●Usage air pressure: 0.48 to 0.68MPa
●Bolt Diameter(mm):14 to 16
●Socket Insertion Depth(mm):12.7
●Maximum Tightening Torque(N/m):300
●No Load Speed(min[[Minus 1st power]]):7500
●Air Consumption(cubic meter/min):0.38
●Hose Fitting:Rc1/4
●Exhaust:Backward
●Total Length(mm):264

Warning

●Tightening torque is am aim value. Torque values change depending on the conditions.
Part Number
SI-1650AH
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s) 1 Day(s)

Loading...

  1. 1

Basic Information

Maximum Tightening Torque(N▪m) 300 Socket Insertion Angle(mm) 12.7 Suitable Bolt Diameter(φ/mm) 14 to 16
Hammer Type Twin Number of Turns(rpm) 7500 Operating Air Pressure(Mpa) 0.48~0.68
Hose Fixing Port Rc1/4 Air Consumption(m³/min) 0.38 Exhaust Rear
Total Length(mm) 264 Trusco Code 292-5729 Mass(g) 2500
Advantages Head rotates 360°. Locks in every 90° to support work with a variety of components. Ultra-lightweight high-tech resin body. Clockwise/anti-clockwise rotation can be switching with one-touch. Use For tightening corners.

Please check the type/dimensions/specifications of the part SI-1650AH in the Air Impact Wrench (360° Swing Type) series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)