(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS

ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS

End mill dedicated for counterboring. Can be used for counterboring processing of hex bolts as well as a tool for pre-drilling processing on angled surface.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
FX-ZDS-3
FX-ZDS-3.3
FX-ZDS-3.4
FX-ZDS-3.5
FX-ZDS-4
FX-ZDS-4.2
FX-ZDS-4.4
FX-ZDS-4.5
FX-ZDS-5
FX-ZDS-5.5
FX-ZDS-6
FX-ZDS-6.5
FX-ZDS-6.8
FX-ZDS-7
FX-ZDS-7.5
FX-ZDS-8
FX-ZDS-8.5
FX-ZDS-9
FX-ZDS-9.5
FX-ZDS-10
FX-ZDS-10.3
FX-ZDS-10.5
FX-ZDS-11.5
FX-ZDS-12
FX-ZDS-12.5
FX-ZDS-13
FX-ZDS-13.5
FX-ZDS-14
FX-ZDS-14.2
FX-ZDS-14.5
FX-ZDS-15
FX-ZDS-15.5
FX-ZDS-16
FX-ZDS-16.5
FX-ZDS-17
FX-ZDS-17.5
FX-ZDS-18
FX-ZDS-18.5
FX-ZDS-19
FX-ZDS-19.5
FX-ZDS-20
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Tool No.
1 Piece(s) 12 Day(s) or more 386508530630
1 Piece(s) 8 Day(s) or more 3.3106508530633
1 Piece(s) 8 Day(s) or more 3.410650-
1 Piece(s) 12 Day(s) or more 3.5106508530635
1 Piece(s) 8 Day(s) or more 4116508530640
1 Piece(s) 12 Day(s) or more 4.2116508530642
1 Piece(s) 8 Day(s) or more 4.411650-
1 Piece(s) 12 Day(s) or more 4.5116508530645
1 Piece(s) 12 Day(s) or more 5136608530650
1 Piece(s) 12 Day(s) or more 5.5136608530655
1 Piece(s) 12 Day(s) or more 6136608530660
1 Piece(s) 12 Day(s) or more 6.5166708530665
1 Piece(s) 8 Day(s) or more 6.8166708530668
1 Piece(s) 12 Day(s) or more 7166708530670
1 Piece(s) 12 Day(s) or more 7.5166708530675
1 Piece(s) 12 Day(s) or more 8198708530680
1 Piece(s) 8 Day(s) or more 8.5198808530685
1 Piece(s) 12 Day(s) or more 9198808530690
1 Piece(s) 12 Day(s) or more 9.5198808530695
1 Piece(s) 12 Day(s) or more 102210808530700
1 Piece(s) 12 Day(s) or more 10.32210908530703
1 Piece(s) 8 Day(s) or more 10.52210908530705
1 Piece(s) 12 Day(s) or more 11.52210908530715
1 Piece(s) 8 Day(s) or more 122612908530720
1 Piece(s) 8 Day(s) or more 12.526121008530725
1 Piece(s) 12 Day(s) or more 1326121008530730
1 Piece(s) 8 Day(s) or more 13.526121008530735
1 Piece(s) 12 Day(s) or more 1426121008530740
1 Piece(s) 8 Day(s) or more 14.22612100-
1 Piece(s) 8 Day(s) or more 14.526121058530745
1 Piece(s) 12 Day(s) or more 1526121058530750
1 Piece(s) 8 Day(s) or more 15.532121158530755
1 Piece(s) 12 Day(s) or more 1632161158530760
1 Piece(s) 12 Day(s) or more 16.532161158530765
1 Piece(s) 8 Day(s) or more 1732161158530770
1 Piece(s) 12 Day(s) or more 17.532161158530775
1 Piece(s) 12 Day(s) or more 1832161158530780
1 Piece(s) 8 Day(s) or more 18.532161158530785
1 Piece(s) 12 Day(s) or more 1932161158530790
1 Piece(s) 12 Day(s) or more 19.538161258530795
1 Piece(s) 8 Day(s) or more 2038201258530800

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Number of flutes(sheet) 2 Type Square
Coating TiAlN Machining Application Countersunk Blade tip shape With Lead
Torsion Angle (θ) Weak Helix (15 to 25°) Flute Diameter Tolerance(mm) 0~-0.02

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)