• Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 7:00 sampai dengan 21:00 pada tanggal 27/10/2019. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 to 21:00 (WIB) 27/10/2019. We apologize for the inconvenience.

Stud Bolt (Inch Size)

Stud Bolt (Inch Size)

When bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
SBW-4100
SBW-4125
SBW-4150
SBW-4175
SBW-4200
SBW-4225
SBW-4250
SBW-4300
SBW-450
SBW-475
SBW-5100
SBW-5125
SBW-5150
SBW-5175
SBW-5200
SBW-5225
SBW-5250
SBW-5300
SBW-550
SBW-575
SBW-6100
SBW-6125
SBW-6150
SBW-6175
SBW-6200
SBW-6225
SBW-6250
SBW-6300
SBW-675
Part NumberVolume DiscountDays to ShipA
(mm)
L
(mm)
Screw Diameter
(mm)
Finishing Heat Coating Old No. Features Mass
(g)
9 Day(s) or more 381004/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.94
15 Day(s) or more 381254/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.118
15 Day(s) or more 381504/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.142
15 Day(s) or more 381754/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.165
15 Day(s) or more 382004/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.189
15 Day(s) or more 502254/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.212
15 Day(s) or more 502504/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.236
11 Day(s) or more 503004/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.283
14 Day(s) or more 22504/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.47
15 Day(s) or more 30754/8" (1/2-12)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.71
11 Day(s) or more 381005/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.147
15 Day(s) or more 381255/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.184
15 Day(s) or more 381505/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.221
15 Day(s) or more 381755/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.258
15 Day(s) or more 382005/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.295
15 Day(s) or more 502255/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.332
15 Day(s) or more 502505/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.369
15 Day(s) or more 503005/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.442
15 Day(s) or more 22505/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.74
15 Day(s) or more 30755/8" (5/8-11)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.111
11 Day(s) or more 381006/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.212
15 Day(s) or more 501256/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.265
11 Day(s) or more 501506/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.318
15 Day(s) or more 501756/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.371
11 Day(s) or more 502006/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.424
15 Day(s) or more 502256/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.477
11 Day(s) or more 502506/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.530
15 Day(s) or more 503006/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.637
15 Day(s) or more 30756/8" (3/4-10)S45CHRC30°~ 35°Black oxide finishWhen bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.159

Loading...

  1. 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)