(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Needle Clip

Part Number

Configured Part Number is shown.

KNT-2S

Features

●Lightweight and optimum for all peeling operations.

Usage

●Slag removal after welding.
●Chipping of concrete/bedrock.
●Rust and paint removal of iron plate.
●Sand removal of castings.

Specification

●Compatible Needle Dimension(mm):3 x 125
●No Load Stroke(min-1):4000
●Air Consumption(m3/min):0.15
●Hose Intake Port:Rc1/4
●Total Length(mm):210
●Working Air Pressure: 0.6MPa
●Needle Diameter x Quantity: Φ3 x 12 pieces
Part Number
KNT-2S
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s) 1 Day(s)

Loading...

  1. 1

Basic Information

Compatible Needle Size(mm) 3×125 Number of Non-load Blows(rpm) 4000 Air Consumption(m3/min) 0.15
Hose Take-in Port Rc1/4 Total Length(mm) 210 Trusco Code 364-0922
Advantages Lightweight and thus ideal for all kinds of stripping work. Use Slag removal after welding. Chipping of concrete and bedrock. Removal of rust and paint on iron plate. Removal of sand from castings. Operating Air Pressure 0.6MPa
Mass(g) 1200

Please check the type/dimensions/specifications of the part KNT-2S in the Needle Clip series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)