(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Center Drill, Okabe Standard, Type 1, Carbide 60°

Center Drill, Okabe Standard, Type 1, Carbide 60°

Because it uses carbide materials, it has both high hardness and elasticity. It is a center drill manufactured with one of the best heat treatment, and can be used for machining general steel, heat-treated steel, stainless steel, cast iron, etc.

Part Number

Configured Part Number is shown.

Part Number
CCD0.3-3
CCD0.4-3
CCD0.5-3
CCD0.6-3.5
CCD0.7-3.5
CCD0.8-4
CCD0.9-4
CCD1.2-5
CCD1.5-5
CCD2.0-6
CCD2.5-7.7
CCD2.5-8
CCD3.0-7.7
CCD3.0-8
CCD3.0-10
CCD4.0-10
CCD4.0-11
CCD4.0-12
CCD5.0-11
CCD5.0-12
CCD5.0-14
CCD6.0-18
Part NumberMinimum order quantityVolume DiscountDays to Shipblade diameter
(mm)
Single blade, two blades Nominal Blade length ℓ
(mm)
Body Diameter D
(mm)
Overall Length L
(mm)
1 Piece(s) 10 Day(s) or more 0.3Double-edged0.3X30.4331
1 Piece(s) 10 Day(s) or more 0.4Double-edged0.4X30.5331
1 Piece(s) 10 Day(s) or more 0.5Double-edged0.5X30.6331
1 Piece(s) 10 Day(s) or more 0.6Double-edged0.6X3.50.73.536
1 Piece(s) 10 Day(s) or more 0.7Double-edged0.7X3.50.93.536
1 Piece(s) 10 Day(s) or more 0.8Double-edged0.8X41436
1 Piece(s) 10 Day(s) or more 0.9Double-edged0.9X41.1436
1 Piece(s) 10 Day(s) or more 1.2Double-edged1.2X51.5542
1 Piece(s) 10 Day(s) or more 1.5Double-edged1.5X51.9542
1 Piece(s) 10 Day(s) or more 2Double-edged2X62.6647
1 Piece(s) 10 Day(s) or more 2.5Double-edged2.5X7.73.27.757
1 Piece(s) 10 Day(s) or more 2.5Double-edged2.5X83.2853
1 Piece(s) 10 Day(s) or more 3Double-edged3X7.73.97.757
1 Piece(s) 10 Day(s) or more 3Double-edged3X83.9853
1 Piece(s) 10 Day(s) or more 3Double-edged3X103.91058
1 Piece(s) 10 Day(s) or more 4Double-edged4X105.21058
1 Piece(s) 10 Day(s) or more 4Double-edged4X115.21169
1 Piece(s) 10 Day(s) or more 4Double-edged4X125.21269
1 Piece(s) 10 Day(s) or more 5Double-edged5X116.51169
1 Piece(s) 10 Day(s) or more 5Double-edged5X126.31269
1 Piece(s) 10 Day(s) or more 5Double-edged5X146.51482
1 Piece(s) 10 Day(s) or more 6Single blade6X187.71895

Loading...

  1. 1

Basic Information

Application Centering (Positioning) Tip angle (θ) 60 work material general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper
Peripheral Blade Y/N NA Tool Material Type Carbide Coating Y/N NA
Coating Type Non-Coated

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)