(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

BCCR Carbide Chucking Reamer (Straight Shank)

BCCR Carbide Chucking Reamer (Straight Shank)

Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
BCCR125
BCCR130
BCCR140
BCCR145
BCCR150
BCCR155
BCCR160
BCCR165
BCCR175
BCCR180
BCCR185
BCCR190
BCCR195
BCCR200
BCCR205
BCCR210
BCCR215
BCCR220
BCCR225
BCCR230
BCCR235
BCCR240
BCCR245
BCCR250
BCCR255
BCCR260
BCCR265
BCCR270
BCCR275
BCCR280
BCCR285
BCCR290
BCCR295
BCCR300
Part NumberMinimum order quantityVolume DiscountDays to ShipTool Diameter
(mm)
Groove Length
(mm)
Number of flutes NT Length under neck
(mm)
Chamfer length
(mm)
Overall Length L
(mm)
Handle Diameter D
(mm)
Carbide length
(mm)
Diameter tolerance details
1 Piece(s) 12 Day(s) or more 12.53661101.31651226+0.007~+0.015
1 Piece(s) 12 Day(s) or more 133681101.31651226+0.007~+0.015
1 Piece(s) 12 Day(s) or more 143681151.51701626+0.007~+0.015
1 Piece(s) 12 Day(s) or more 14.53681201.51801626+0.007~+0.015
1 Piece(s) 16 Day(s) or more 153681201.51801626+0.007~+0.015
1 Piece(s) 12 Day(s) or more 15.53781251.51851627+0.007~+0.015
1 Piece(s) 16 Day(s) or more 163781251.51851627+0.007~+0.015
1 Piece(s) 12 Day(s) or more 16.53781251.51851627+0.007~+0.015
1 Piece(s) 12 Day(s) or more 17.53781301.51952027+0.007~+0.015
1 Piece(s) 12 Day(s) or more 183781301.51952027+0.007~+0.015
1 Piece(s) 12 Day(s) or more 18.53781301.51952027+0.008~+0.017
1 Piece(s) 12 Day(s) or more 193781301.51952027+0.008~+0.017
1 Piece(s) 12 Day(s) or more 19.53781401.52052027+0.008~+0.017
1 Piece(s) 12 Day(s) or more 203781401.52052027+0.008~+0.017
1 Piece(s) 12 Day(s) or more 20.54181501.52152031+0.008~+0.017
1 Piece(s) 12 Day(s) or more 214181501.52152031+0.008~+0.017
1 Piece(s) 12 Day(s) or more 4.926 ~ 21.54181501.52152031+0.008~+0.017
1 Piece(s) 12 Day(s) or more 224181501.52152031+0.008~+0.017
1 Piece(s) 12 Day(s) or more 22.54181601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 234181601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 4.494 ~ 23.54181601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 244181601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 24.54181601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 254181601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 25.541101601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 2641101601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 8.571 ~ 26.541101601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 2741101601.52302531+0.008~+0.017
1 Piece(s) 12 Day(s) or more 27.546101601.52403236+0.008~+0.017
1 Piece(s) 12 Day(s) or more 2846101601.52403236+0.008~+0.017
1 Piece(s) 12 Day(s) or more 28.546101601.52403236+0.008~+0.017
1 Piece(s) 12 Day(s) or more 2946101601.52403236+0.008~+0.017
1 Piece(s) 12 Day(s) or more 29.546101601.52403236+0.008~+0.017
1 Piece(s) 12 Day(s) or more 3046101601.52403236+0.008~+0.017

Loading...

  1. 1

Basic Information

Shank Type straight shank work material general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Die Steel / Alloy Steel Coating Y/N NA
Groove Shape Straight Base Blade Y/N NA Tool Material Type Carbide
Diameter tolerance m5 Tip chamfer angle 30°

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)