(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TA-EZ Drill TEZD-MS Type

Part Number

Configured Part Number is shown.

Part Number
TEZD1400S16-MS
TEZD1500S20-MS
TEZD1600S20-MS
TEZD1700S20-MS
TEZD1800S20-MS
TEZD1900S25-MS
TEZD2000S25-MS
TEZD2100S25-MS
TEZD2200S25-MS
TEZD2300S25-MS
TEZD2400S32-MS
TEZD2500S32-MS
TEZD2600S32-MS
TEZD2700S32-MS
TEZD2800S32-MS
TEZD2900S32-MS
TEZD3000S32-MS
TEZD3200S32-MS
Part NumberMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm)
Groove Length L
(mm)
Overall Length L
(mm)
Shank Type Dimensions/Ds
(φ mm)
Dimensions/ℓ2
(mm)
Dimensions/ℓs
(mm)
Compatible Diameter Component: Clamp screw Component: wrench Supported tips
1 Piece(s) 12 Day(s) or more 1451113End Mill Shank166548Over 13.5, and 14.5 or lessDSW-2045HA-07TEZ1400 TEZ1410 TEZ1450
1 Piece(s) 8 Day(s) or more 1554119End Mill Shank206950Over 14.5, and 15.5 or lessDSW-2045HA-07TEZ1500 TEZ1550
1 Piece(s) 8 Day(s) or more 1658124End Mill Shank207450Over 15.5, and 16.5 or lessTSW-2556HA-08TEZ1600 TEZ1630 TEZ1650
1 Piece(s) 12 Day(s) or more 1761128End Mill Shank207850Over 16.5, and 17.5 or lessTSW-2556HA-08TEZ1700 TEZ1750
1 Piece(s) 8 Day(s) or more 1865133End Mill Shank208350Over 17.5, and 18.5 or lessTSW-2556HA-08TEZ1800 TEZ1850
1 Piece(s) 8 Day(s) or more 1968143End Mill Shank258756Over 18.5, and 19.5 or lessTSW-2567HA-08TEZ1900 TEZ1930 TEZ1950
1 Piece(s) 12 Day(s) or more 2072148End Mill Shank259256Over 19.5, and 20.5 or lessTSW-2567HA-08TEZ2000 TEZ2050
1 Piece(s) 12 Day(s) or more 2175152End Mill Shank259656Over 20.5, and 21.5 or lessTSW-2567HA-08TEZ2100 TEZ2150
1 Piece(s) 12 Day(s) or more 2279157End Mill Shank2510156Over 21.5, and 22.5 or lessDSW-307HA-10TEZ2190 TEZ2200 TEZ2230 TEZ2250
1 Piece(s) 8 Day(s) or more 2382161End Mill Shank2510556Over 22.5, and 23.5 or lessDSW-307HA-10TEZ2300 TEZ2350
1 Piece(s) 12 Day(s) or more 2486170End Mill Shank3211060Over 23.5, and 24.5 or lessDSW-307HA-10TEZ2400 TEZ2450
1 Piece(s) 12 Day(s) or more 2589118.1 ~ 174End Mill Shank3211460Over 24.5, and 25.5 or lessDSW-309HA-10TEZ2500 TEZ2550
1 Piece(s) 12 Day(s) or more 2693179End Mill Shank3211960Over 25.5, and 26.5 or lessDSW-309HA-10TEZ2600 TEZ2650
1 Piece(s) 12 Day(s) or more 2796183End Mill Shank3212360Over 26.5, and 27.5 or lessDSW-309HA-10TEZ2700 TEZ2740 TEZ2750
1 Piece(s) 8 Day(s) or more 28100188End Mill Shank3212860Over 27.5, and 28.5 or lessTSW-3510HA-15TEZ2800 TEZ2850
1 Piece(s) 8 Day(s) or more 29103192End Mill Shank3213260Over 28.5, and 29.5 or lessTSW-3510HA-15TEZ2900 TEZ2950
1 Piece(s) 8 Day(s) or more 30107197 ~ 289.7End Mill Shank3213760Over 29.5, and 30.5 or lessTSW-3510HA-15TEZ3000 TEZ3050
1 Piece(s) 8 Day(s) or more 32146206straight shank3214460Over 31.5, and 32.5 or lessTSW3512HA-15TEZ3200

Loading...

  1. 1

Basic Information

work material general steel / Quenched and tempered steel / Stainless Steel / Cast Iron Tool Material Type Carbide Coating Y/N Available
With/without Oil Hole Available Detailed coating types Value Coat Machining Application With oil hole drilled
Specifications Effective Machining Depth with Coolant Hole: 3XDc

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)