(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Magnetic Nozzle (for Holding Cutting Fluid)

Magnetic Nozzle (for Holding Cutting Fluid)

[Features]
· The powerful 800 N magnet makes it easy to install in any position.
· The angle and direction of the nozzle are freely adjustable.
· The additional Rc1/4 screw holes allow two nozzles to be used.
· Two independent screw holes are available.
[Applications]
· For cutting fluid lubrication.

  • STOCK

Part Number

Configured Part Number is shown.

TMN-1-S

Features

●800N Powerful magnet allows easy installation in any position.
●Additional threaded holes Rc1/4 are drilled so you can use two nozzles.

Usage

●For cutting fluid supply.

Specification

●Number of Nozzles:1
●Nozzle Length(mm):320
●Adhesion Strength(N):800
●SPQ(set):20
●Adaption fluid: water- soluble cutting fluid, oil cutting fluid
Part Number
TMN-1-S
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s) 1 Day(s)

Loading...

  1. 1

Basic Information

Product Category Heating and Cooling Equipment Trusco Code 219-8592 Features The powerful 800 N magnet makes it easy to install in any position. The angle and direction of the nozzle are freely adjustable. The additional Rc 1/4 screw holes allow two nozzles to be used. Two independent screw holes are available.
Application For cutting fluid lubrication. Nozzle number 1 Nozzle Length(mm) 320
Hole Diameter 1/4 Adsorption Power (N) 800 Valve Available
Maximum Operating Liquid Pressure(kg/cm2) 3.46 Mass 1,400 g/set Cutting Fluid Inlet 13.5mm
Specifications Compatible Fluid: aqueous cutting solution, oil-based cutting solution

Please check the type/dimensions/specifications of the part TMN-1-S in the Magnetic Nozzle (for Holding Cutting Fluid) series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)