(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Angle Open Tip Gauge

Angle Open Tip Gauge

A welding gauge that can be used to measure beveling angles with a precise minimum reading value of 0.5°, compliant with the tolerances of various standards.
· A product specialized for angle measurement.
· The sharpened tip also allows measurement of 15 mm or less thin plates with root gap of 0 mm.
· The opening angle of weld joints can be measured directly with this one piece of equipment. Angle measurements of T-joints can also be performed while avoiding buildup.
· A large scale that is highly visible at work sites. The minimum scale markings support 0.5 degrees.
· Featuring a matte silver finish on the face and an easy-to-read scale.
· Rugged and light for convenient carrying (with plastic case).
· Used for measurement of the angles of the butt-welding joint groove and the welding joint.


Part Number

Configured Part Number is shown.


Part Number
Part NumberVolume DiscountDays to ShipMass
Material Feature 1 Feature 2 Feature 3 Feature 4 Use Specifications
9 Day(s) or more 73.5Stainless Steel (SUS410)It is possible to directly measure the groove angle of the welded joint with this alone. The sharpening of the tip also allows for the measurement of a thin plate with a root gap of 0 mm, 15 mm or less.Large scale markings for easy use at work sites. Minimum scale markings are compatible with 0.5 degrees. Angle measurements of T-joints can also be performed while avoiding buildup.Featuring a matte silver surface finish and easy-to-read scale.Rugged and Light for Easy Convenient Carrying (with Plastic Case)Measurement of the angles of the coupling joint groove and the welding jointBevel Angle: Angle of scissor 25 to 65° (Minimum reading value: 0.5°) / Tilting after Angle Stud Welding of Joint Part: 70 to 110°


  1. 1

Basic Information

Angle Measurement Precision(°) ±0.5

Please check the type/dimensions/specifications of the part WGA-65 in the Angle Open Tip Gauge series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)