(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

S...PDZN15 Type (Draw Machining)

S...PDZN15 Type (Draw Machining)

[Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

Part Number

Configured Part Number is shown.

Part Number
S25R-PDZNL15-32
S25R-PDZNR15-32
S32S-PDZNL15-44
S32S-PDZNR15-44
S40T-PDZNL15-54
S40T-PDZNR15-54
Part NumberMinimum order quantityVolume DiscountDays to ShipMinimum Processing Diameter øA Preferred Hand Overall Length L1 Shank Diameter øD H
(mm)
F
(mm)
Figure S1
(mm)
S2
(mm)
L2
(mm)
L3
(mm)
θ Applicable Tip
1 Piece(s) 8 Day(s) or more 32Left Handed225252417Figure 56.513403013°DN○A1504..
1 Piece(s) 8 Day(s) or more 32Right Handed225252417Figure 56.513403013°DN○A1504..
1 Piece(s) 8 Day(s) or more 44Left Handed275323122Figure 66.516503013°DN○G1504..
1 Piece(s) 8 Day(s) or more 44Right Handed275323122Figure 66.516503013°DN○G1504..
1 Piece(s) 8 Day(s) or more 54Left Handed325403927Figure 67.516655012°DN○M1504..
1 Piece(s) 8 Day(s) or more 54Right Handed325403927Figure 67.516655012°DN○M1504..

Loading...

  1. 1

Basic Information

Applicable Tip Shape D (55° Diamond) Use Pull Clamp Shape Pin Lock
Protrusion Length (L/D) Up to 3 Oil Hole Presence None L4(mm) 25
Reference Corner R (rε) 0.8

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)