(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

CoroCut, Q Cut, Blade/Adapter

Part Number

Configured Part Number is shown.

 
Part Number
LF123H32-25B1
LF123M100-45B1
LF123M120-93B1
LF123R120-93B1
RF123E20-21B1
RF123E25-25B1
RF123F25-21B1
RF123F25-25B1
RF123G25-25B1
RF123G30-21B1
RF123G33-25B1
RF123H32-25B1
RF123M100-45B1
RF123M120-93B1
RF123R120-93B1
Part NumberMinimum order quantityVolume DiscountDays to ShipApplication Groove Width
(mm)
Maximum Groove Depth
(mm)
Selfishly Number of corners for tip use Shank height
(mm)
Cutting Angle
(°)
Sheet size Clamp System Dimension B
(mm)
Dimension H1
(mm)
Dimension L1
(mm)
Gauge Chip Tip tightening torque
(Nm)
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off432Left-hand2 Corner31.90HScrew Clamp825150N123H2-0400-CM4.9
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off11100Left-hand1 Corner50.80MScrew Clamp8.1545250N123M1-1100-GM4.5
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off11120Left-hand1 Corner101.60MScrew Clamp8.1593300N123M1-1100-GM4.5
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off15120Left-hand1 Corner101.60RScrew Clamp11.193300N123R1-1500-GR4.5
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off220Right-hand2 Corner25.90EScrew Clamp7.2521110N123E2-0200-0002-CM3.3
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off225Right-hand2 Corner31.90EScrew Clamp825150N123E2-0200-CM3.3
1 Piece(s) 8 Day(s) or more -2.5-Right-hand------21-N123F2-0250-CM3.6
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off2.525Right-hand2 Corner31.90FScrew Clamp825150N123F2-0250-CM3.6
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off325Right-hand2 Corner31.90GScrew Clamp825150N123G2-0300-CM4.5
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off330Right-hand2 Corner25.90GScrew Clamp6.8521110N123G2-0300-0003-CM4.5
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off333Right-hand2 Corner31.90GScrew Clamp6.8525150N123G2-0300-0003-CM4.5
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off432Right-hand2 Corner31.90HScrew Clamp825150N123H2-0400-CM4.9
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off11100Right-hand1 Corner50.80MScrew Clamp8.1545250N123M1-1100-GM4.5
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off11120Right-hand1 Corner101.60MScrew Clamp8.1593300N123M1-1100-GM4.5
1 Piece(s) 8 Day(s) or more Outer Diameter Grooving / Cutting off15120Right-hand1 Corner101.60RScrew Clamp11.193300N123R1-1500-GR4.5

Loading...

  1. 1

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)