(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Tapered Neck Ball End Mill KTBL-2

Part Number
KTBL-2R0110
KTBL-2R0120
KTBL-2R0151
KTBL-2R0152
KTBL-2R0210
KTBL-2R0220
KTBL-2R0251
KTBL-2R0252
KTBL-2R0310
KTBL-2R0320
KTBL-2R0410
KTBL-2R0420
KTBL-2R0530
KTBL-2R0540
KTBL-2R1040
KTBL-2R1050
KTBL-2R1540
KTBL-2R1550
KTBL-2R2040
KTBL-2R2050
KTBL-2R2060
KTBL-2R2540
KTBL-2R2550
KTBL-2R2560
KTBL-2R3040
KTBL-2R3050
KTBL-2R3060
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (l)
(mm)
R Size
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Effective Length
(mm)
Handle diameter tolerance
1 Piece(s) 8 Day(s) or more 0.20.40.16100100~-0.008
1 Piece(s) 8 Day(s) or more 0.20.40.16100200~-0.008
1 Piece(s) 8 Day(s) or more 0.30.60.156100100~-0.008
1 Piece(s) 8 Day(s) or more 0.30.60.156100200~-0.008
1 Piece(s) 8 Day(s) or more 0.40.80.26100100~-0.008
1 Piece(s) 8 Day(s) or more 0.40.80.26100200~-0.008
1 Piece(s) 8 Day(s) or more 0.510.256100100~-0.008
1 Piece(s) 8 Day(s) or more 0.510.256100200~-0.008
1 Piece(s) 8 Day(s) or more 0.61.50.36100100~-0.008
1 Piece(s) 8 Day(s) or more 0.61.50.36100200~-0.008
1 Piece(s) 8 Day(s) or more 0.820.46100100~-0.008
1 Piece(s) 8 Day(s) or more 0.820.46100200~-0.008
1 Piece(s) 8 Day(s) or more 130.56100300~-0.008
1 Piece(s) 8 Day(s) or more 130.56100400~-0.008
1 Piece(s) 8 Day(s) or more 2616110400~-0.008
1 Piece(s) 8 Day(s) or more 2616110500~-0.008
1 Piece(s) 8 Day(s) or more 391.56120400~-0.008
1 Piece(s) 8 Day(s) or more 391.56120500~-0.008
1 Piece(s) 8 Day(s) or more 41026120400~-0.008
1 Piece(s) 8 Day(s) or more 41026120500~-0.008
1 Piece(s) 8 Day(s) or more 41026120600~-0.008
1 Piece(s) 8 Day(s) or more 5122.56120400~-0.008
1 Piece(s) 8 Day(s) or more 5122.56120500~-0.008
1 Piece(s) 8 Day(s) or more 5122.56120600~-0.008
1 Piece(s) 8 Day(s) or more 61438120400~-0.009
1 Piece(s) 8 Day(s) or more 61438120500~-0.009
1 Piece(s) 8 Day(s) or more 61438120600~-0.009

Loading...

  1. 1
 

Basic Information

Type Taper ball work material general steel / Quenched and tempered steel / Stainless Steel / Cast Iron Coating Non-Coated
Gradient of neck section 1° (Both Corners) Blade diameter tolerance 0~-0.01 Torsional Angle Torsional Angle 30°
R Tolerance +0.01~-0.01 Material Ultrafine particle alloys

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)